Screws, Studs, Bolts and Nuts

This is a set of wheel bolts to fit Alloy Wheels on a Classic Fiat 500This set consists of16x High Tensile Allen Key Wheel Bolts16x  Spring Washer1x  Allen Keyto fit:Classic Fiat 500 all modelsIf you have any questions please email us for help..

When you change over to an Alloy Rocker Cover on a Classic Fiat 500 or 126 the Studs are usually too short to reach, as the Alloy Covers are higherThis kit consists of2x  Longer Studs 115mm2x  St Steel Nyloc Nut2x  Fibre Washerto fit:Classic Fiat 500 N,D,F,L,R..

This Wheel Bolt has a Tapered Head with Chrome Finish to fit various wheelsDimms:  Bolt Diameter M10mm x 1.5 (35mm),  Total Length 50mmto fit:Classic Fiat 500 all modelsFiat 126 all early models (up to 1978)If you have any questions please feel free to ask..

This Wheel Bolt has a Flat Head with Domed Chrome Finsh to fit various wheelsDimms:  Bolt Diameter M10mm x 40mm,  Total Length 60mmto fit:Classic Fiat 500 all modelsFiat 126 all early models (up to 1978)If you have any questions please feel free to ask..

These bolts are most commonly used for door locks and catches but there are a multitude of applicationsfor all classic cars..

This is a high Tensile Bolt and Nut to fit through the Bottom of the Front Steering KnuckleM10 x 95mmto fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600Fiat 850If you have any questions please contact us for help..

This is the old fashioned Castle Slotted Type Nut that requires locking with a split pin through the hubto fit:Classic Fiat 500 all early models  (from 1957 to 1969)Fiat 600Fiat 850If you have any questions or queries please contact our office for help..

This Long Chrome Bolt comes with a new Washer and NutThe Long Chrome Bolts are made to fit the Knudge Bars and Bumpers onto the carto fit:Classic Fiat 500If you have any queries or questions please feel free to ask..

This Chrome Bolt has a large Domed Head to fit flush with the Bumper and comes with a new Washer and Nut(If your Classic Fiat 500 has Chrome Knudge Bars fitted front and rear then you need the extra long Chrome Bolts)to fit:Classic Fiat 500 N/D/F/L/R all modelsClassic ..

This Chrome Wheel Bolt fits into the center of the Wheel to secure the Hub CapSupplied with a Spring Washerto fit:Classic Fiat 500 all models (up to 1974)If you have any questions please feel free to ask..

These bolts and washers are used to install the clutch plate onto the flywheelThis is a kit of6x Bolt high tensile6x Spring Washerto fit:Classic Fiat 500 all modelsFiat 124Fiat 125Fiat 126Fiat 127Fiat 128Fiat 600Fiat 850Fiat 900..

Clutch Cable Securing Stud & Nuts to fit:Classic Fiat 500 all modelsFiat 126 all models If you have any questions please contact us for help..

This is a PAIR (2) of Bolts and Buts for the Con RodIts recommended to change these when you do an engine rebuildto fit:Classic Fiat 500 all modelsFiat 126 all modelsIf you have any questions please contact us for help..

Made in Italyto fit:Classic Fiat 500 all modelsFiat 126 all modelsIf you have any questions please contact us for help..

Set of 8 Cylinder Head Studs complete with Washers & Domed Nutsto fit:Classic Fiat 500 N/D/F/L all modelsIf you have any questions please contact us for help..

Set of 8 Cylinder Head Studs complete with Washers & Domed Nutsto fit:Classic Fiat 500R 594cc all modelsFiat 126 all air cooled modelsIf you have any questions please contact us for help..

This Hollow Bolt is screwed into the Cylinder at either side and acts as a ventto relieve the pressure in the event of a Head Gasket Failureto fit:Classic Fiat 500 D/F/L  all modelsIf you have any questions please contact us for help..

This Stainless Steel Bolt screws into the sides of the Distributor body to attach the metal spring clips to hold the Distribtor Cap in placeSupplied as ONE BoltFiat Part No:  9910387to fit:Classic Fiat 500 all modelsFiat 126 all models (exc BIS)Fiat 600 all models ..

These Stainless Steel Bolts screw into the sides of the Distributor body and attach the metal spring clips to hold the Distribtor Cap in placeSupplied as a kit of TWO Stainless Steel Boltsto fit:Classic Fiat 500 all modelsFiat 126 all models (exc BIS)Fiat 600 all models..

Brand NewThis is the screw to secure the condenser ont the side of the distributorto fit:Classic Fiat 500 all modelsFiat 126 all air cooled modelsIf you have any questions please contact us for help..