Steering

This is a Horn Push Button to fit most Wooden, Leather and Sports Steering WheelsDimmensions:Diameter of bottom 54mm (where it pushes into the steering wheel)Diameter of top 61mm (where the button is located)to fit:Classic Fiat 500 all modelsFiat 126 all models..

Brand NewIf your plastic or bakelite steering wheel cracked or damaged then this is a cushioned steering wheel cover that can be used on many classic steering wheelsIts easy to install yourself with button fastenersFits many models of cars with Steering Wheel Diameter up to 50..

Quality Brand by LUISIMade in ItalySupplied with a Horn Push & Badgeplease choose which one you preferSold separately:Steering Wheel HubFiat 500R & 126 –  RIC 1553Fiat 500 N,D,F,L,G – RIC 1554(plus many others)Wheel Diameter 320 mmto fit: ..

This is a high Tensile Bolt and Nut to fit through the Bottom of the Front Steering KnuckleM10 x 95mmto fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600Fiat 850If you have any questions please contact us for help..

This is a Brand New Kit of TWO Stub Axles for the Left & RightThey have new top Bushes, Pins, Washers and Bushes and are ready to installThe Kit also comes with two new Hub Nuts(Once fitted they must be greased fully using a grease gun until the grease goes all the way through..

OE Quality with original style rubber bootsMade in ItalyTo fit:Classic Fiat 500 F/L/R/GFiat 126 all early modelsIf you have any queries or questions please feel free to ask..

Brand NewMade in ItalyTo fit:Classic Fiat 500 N/D & Early G (from 1957 to 1965)If you have any queries or questions please feel free to ask..

Brand Newmade in ItalyOuter Track Rod End complete with a Grease Nipple underneath so you can keep it topped up with greaseSuppled with a new NutTo fit:Classic Fiat 500 N/D & Early G (from 1957 to 1965)If you have any queries or questions please feel..

Quality Brand Italian PartsDiameter of the Track Rod Pin: 10mmThis kit includes the following:2x Inner Track Rod End (RIC-2324)2x Outer Track Rod End (RIC-2325)2x Track Rod (RIC-992)1x Center Tie Rod/Drag Link (RIC-2326)To fit:Classic Fiat 500 N/D/G..

Quality OE Brand Italian Parts12mm diameter PinThis kit includes the following:2x Inner Track Rod End (RIC-49)2x Outer Track Rod End (RIC-991)2x Track Rod (RIC-992)1x Center Tie Rod/Drag Link (RIC-993)To fit:Classic Fiat 500 F/L/R/GFiat 126 seri..

Quality Brand Italian PartsDiameter of the Track Rod Pin: 10mmThis kit includes the following:2x Inner Track Rod End with Grease Nipple (RIC-3710)2x Outer Track Rod End with Grease Nipple (RIC-3711)2x Track Rod (RIC-992)1x Center Tie Rod/Drag Link with Grease Nipp..

This is a Horn Push Button to fit most Wooden, Leather and Sports Steering WheelsDimmensions:Diameter of bottom 54mm (where it pushes into the steering wheel)Diameter of top 61mm (where the button is located)to fit:Classic Fiat 500 all modelsFiat 126 all models..

This is a Horn Push Button to fit most Wooden, Leather and Sports Steering WheelsDimmensions:Diameter of bottom 54mm (where it pushes into the steering wheel)Diameter of top 61mm (where the button is located)to fit:Classic Fiat 500 all modelsFiat 126 all models..

This Lock Washer fits behind the Front Hub Nut that screws onto the Stub AxleFiat Part No: 985781 to fit:Classic Fiat 500 all models  (up to 1974)Fiat 600 all models If you have any questions or queries please contact our office for help..

High Quality Productmade by major manufacturer in ItalyThis metal and rubber bush fits into the Front Leaf Spring at each end and also into the Front Stub AxleDimmensons:Inner Diameter [mm] 10Outer Diameter [mm] 27Height 1 [mm] 45Height 2 [mm] 51to..

High Quality Productmade by major manufacturer in Italy This metal and rubber bush fits into the Aluminium Steering Idler Dimmensons:Inner Diameter [mm] 13Outer Diameter [mm] 29Height 1 [mm] 20Height 2 [mm] 30 (These ..

Fully Reconditioned Steering Boxfor Left Hand Drive Cars onlyPLEASE NOTE: The Shaft has 17 Splines on the Shaft where it meets the Steering Shaft inside the carto fit:Classic Fiat 500R & 126 all modelsPLEASE NOTE: This is a reconditioned part so we would need your old St..

Fully ReconditionedThe Splines on the shaft have 18 TEETH where it joins the Steering Shaft inside the carThe holes on the steering arm are 10mm tapered to suit the 10mm steering joints for all early modelsThis is a Steering Box complete with the Arm for a Right Hand Drive veh..

To Fit a multtude of Fiat, Alfa Romeo & Lancia models old and newFiat Part No: ..

Quality OCAP Partmade in ItalyInner Track Rod EndSuppled with a new NutFiat Part No: 5000240To fit:Classic Fiat 500 N/D/G (from 1957 to 1965)If you have any queries or questions please feel free to ask..