Axles, Shafts, Joints and Couplings

Quality RubberMade in ItalyThis Boot fits on the inside of the Drive Shaft where it connects to the GearboxIt has an internal Oil Seal to stop the oil leaking and a Plastic Bush to fit onto the ShaftDiameter: 22-24mm (larger type shaft)to fit:Classic Fiat 500 F..

This Boot fits on the inside of the Drive Shaft where it connects to the GearboxIt has an internal Oil Seal to stop the oil leaking and a Plastic Bush to fit onto the ShaftDiameter:  17mm (early small type shaft)to fit:Classic Fiat 500 N/D/G Early models (up to 1966) ..

Quality RubberMade in ItalyThis Boot fits on the inside of the Drive Shaft where it connects to the GearboxIt has an internal Oil Seal to stop the oil leaking and a Plastic Bush to fit onto the ShaftDiameter: 19mm (smaller type shaft) to fit:Classic Fiat 500 D,F,L & Giardiniera m..

Quality Rubbermade in ItalyThis Boot fits on the inside of the Drive Shaft where it connects to the GearboxIt has an internal Oil Seal to stop the oil leaking and a Metal Bush to fit onto the ShaftDiameter: 22-24mm (larger type shaft)to fit:Classic Fiat 500 F/L..

Made in PolandThis Kit consist's of all the parts to overhaul ONE of Front Stub Axles(we would always recommend changing the top Stub Bushes at the same time, available above in related items)Fits:Classic Fiat 500 all modelsFiat 126 all modelsIf you have any ques..

This Kit consist's of all the parts to overhaul a pair of Front Stub AxlesIncluding Brass Bushes(we would always recommend changing the top Stub Bushes at the same time, available above in related items)Fits:Classic Fiat 500 all modelsFiat 126 all modelsIf you have a..

This Kit consist's of all the parts to overhaul a pair of Front Stub Axles(Including Top Bush, Brass Bushes, Steel Washers and Bearings to allow the steering to be lighter)One Bearing is installed on the bottom of each stub axle only to take the loadFits:Classic Fiat 50..

This Boot fits on the outside of the Drive Shaft where it connects to the WheelIt is basically a rubber dust cover and fits onto the Drive Shaft and around the lip of the Flange Diameter:  17mm (smaller type shaft)(These are designed to be nice tight fit so they may seem to sma..

Made in ItalyThis Boot fits on the outside of the Drive Shaft where it connects to the WheelIt is basically a rubber dust cover and fits onto the Drive Shaft and around the lip of the Flange Diameter:  19mm (smaller type shaft)(These are designed to be nice tight fit so they ma..

Made in ItalyThis Boot fits on the outside of the Drive Shaft where it connects to the WheelIt is basically a rubber dust cover and fits onto the Drive Shaft and around the lip of the FlangeDiameter:  22-24mm (larger type shaft)(These are designed to be nice tight fit so they ma..

These Washers are located at the end of the Drive Shaft inside the Differential to stop them rattlingto fit:Classic Fiat 500 all modelsFiat 126 all modelsIf you have any questions please contact us for help..

Polished Chrome Front Grease Cap fits on the Front Hub and acts as a dust & dirt shieldDiameter 34.5mmto fit:Classic Fiat 500 all modelsFiat 126 early models (594cc)If you have any questions please contact us for help..

Rear Hub ShaftThis has a Course 6 Splinesto fit:Classic Fiat 500 N & D all models  (up to 1966)If you have any questions or queries please contact our office for help..

Rear Hub Shaftto fit:Classic Fiat 500 F/L & R all models  (from 1966 to 1974)Fiat 126 early model with 190 PCD Wheels  (up to 1977)If you have any questions or queries please contact our office for help..

Brand Newto fit:Classic Fiat 500 GiardinieraFiat 600 Series 2 all modelsFiat 126 all modelsIf you have any questions please contact us for help..

Rear Hub Flange (4 bolt type)(for 22mm Drive Shaft)to fit:Classic Fiat 500 F/L & R all models  (from 1966 to 1974)Fiat 126 all modelsFiat 600If you have any questions or queries please contact our office for help..

Rear Hub Flange (4 bolt type)(for 19mm Drive Shaft)to fit:Classic Fiat 500 F/L  (from 1966 on)If you have any questions or queries please contact our office for help..

Rear Hub Flange (4 bolt type)This is a modified Flange for the largest 22mm Drive Shafts to fit:Classic Fiat 500 N/D all models  (from 1957 to 1966) If you have any questions or queries please contact our office for help..

Rear Hub Flange (4 bolt type)(for 19mm Drive Shaft)  to fit:Classic Fiat 500 N/D  (up to1966) If you have any questions or queries please contact our office for help..

Rear Hub Flange (4 bolt type)(for 17mm Drive Shaft) Fiat Part No: 4044441 to fit:Classic Fiat 500 N/D all models  (up to 1966) If you have any questions or queries please contact our office for help..