Exhaust Parts and Fittings

Brand newMade in ItalyThis kit consist's of 2x  Bracket Kitall x Bolts, nuts & washers to install to fit:classic Fiat 500 RFiat 126 594cc & 650cc If you have any questions please feel free to ask..

Brand newMade in ItalyThis kit consist's of2x  Bracket Kitall x Bolts, nuts & washers to installto fit:Classic Fiat 500 N/D/F/L 499cc all modelsIf you have any questions please feel free to ask..

This is a kit to install all the exhaust brackets to the engine and exhaustto fit:Classic Fiat 500R (with 600 or 650cc engine fitted)Fiat 126 air cooled all models..

Quality PartsMade in ItalyThis kit consist's of ONE Top and ONE Bottom Bracket to make a matching pair (there are two pairs fitted to an exhaust)to fit:classic Fiat 500 D/F/L..

This kit consist's of ONE Top and one Bottom Bracket to make a matching pair(you would require TWO pairs for one exhaust)to fit:classic Fiat 500 RFiat 126 594cc & 650ccIf you have any questions please feel free to ask..

Brand NewMade in ItalyThis is a Pair of Brackets to fit the Exhaust (see diagram no 10 & 11)to fit:Classic Fiat 500 Giardiniera (estate) all modelsAutobianchi Bianchina PanoramicaIf you have any questions please contact us for help..

Best Quality AvailableMade as per original specification with threaded Stud onto ExhaustThis part links from the Exhaust to the Engine, there are two per Engine to join both parts of the Exhaustto fit:Classic Fiat 500 D/N/F/L/R 499cc, 594cc, 650cc (not BIS)Fiat 126 all air c..

Best Quality AvailableMade as per original specification with threaded Stud onto ExhaustThis part links from the Exhaust to the Engine, there are two per Engine to join both parts of the ExhaustThis kit consists of1x Manifold (RIC 2954)1x Manifold Gasket (RIC 395)1x Exhaust G..

Made in PolandThis manifold is supplied with fittings and gasketsThis part links from the Exhaust to the Engine, there are two per Engine to join both parts of the Exhaustto fit:Autobianchi BianchinaFiat 500 D/N/F/L/R 499cc, 594cc & 126, 650cc (not BIS)Fiat 126 ..

This Gasket fits between the Exhaust and the Manifold/ElbowYou would normally change them as a pairto fit:Classic Fiat 500 N/D/F/L/R all modelsFiat 126 600cc/650cc  (NOT Bis)..

This Gasket fits between the Exhaust and the Manifold to fit: Classic Fiat 500 Giardiniera (estate) all  modelsFiat 126 Bis 704cc (Water Cooled)..

This is for 5 metres x 50mm of Heat Wrap for the exposed exhaust to insulateSupplied with Six Stainless Steel Cable Ties to secureto fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600 all modelsFiat 850 all modelsPLUS any other carsIf you have a..

This is a pair of high tensile Bolts and Spring Washers to fit the Exhaust Manifolds to fit:Classic Fiat 500 all models (except Giardiniera)Fiat 126 all air cooled models If you have any questions please fee free to ask..

This Brass Nut is used to attach the Exhaust to the Manifold(8mm x 1.25 x 8)to fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600 all modelsFiat 850 all modelsFiat 900T/EIf you have any questions or queries please contact our office for help..

This kit consists of all the parts to install an exhaust manifold to cylinder head and exhaust1x Exhaust Gasket (RIC 394)1x Exhaust Manifold Gasket Rear (RIC 395)2x Brass Nut & Spring Washer (RIC 939)2x Manifold to Head Bolts & Spring Washers (RIC 1898)to fit:Classic Fia..

This is a kit of high tensile Flat Edged Bolts and Spring Washers to fit the Exhaust ManifoldsSupplied with Brass Nutsto fit:Classic Fiat 500 all models (except Giardiniera)Fiat 126 all air cooled modelsIf you have any questions please fee free to ask..

This Gasket fits between the Exhaust Manifold/Elbow and the EngineYou would normally change them as a pairto fit:Classic Fiat 500 N/D/F/L/R all modelsFiat 126 600cc/650cc  (NOT Bis)..

This Metal Shield fits onto the right hand side of the engine bay to protect the Distributor from the heat from the ExhaustSupplied with two bolts to attachto fit:Classic Fiat 500D/F/L all models (up to 1974)If you have any questions please feel free to ask for help..

This Metal Shield fits onto the right hand side of the engine bay to protect the Distributor from the heat from the ExhaustSupplied with two bolts to attachto fit:Classic Fiat 500 R all models (up to 1975)If you have any questions please feel free to ask for help..

This Stud is used to attach the Exhaust to the Manifold/Engine(8mm x 1.25 x 42)to fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600 all modelsFiat 850 all modelsFiat 900T/EIf you have any questions or queries please contact our office for help..