Classic Fiat 500 Gaskets, Seals, Grommets and Rubber Parts
We sell all the Rubber Seals, Grommets, Pads, Plugs, Washers, Oil Seals, O'Rings and Gaskets for the Classic Fiat 500
Model: all models
Stock: In Stock
To fit over the Accelerator/Throttle Pedal to add grip
to fit:
Classic Fiat 500 all models (up to 1974)
Fiat 126 all models
..
£1.95
Model: Classic Fiat 500 & 126 Air Cooled all models
Stock: In Stock
This is a thick paper Gasket for the Alloy Sump with a set of Alan Key Bolts to attachto fit:Classic Fiat 500 all models (except Giardiniera)Fiat 126 ..
£11.95
Model: Classic Fiat 500 all models
Stock: In Stock
Made in Italyto fill hole 38/40mm Diameterto fit:Classic Fiat 500 all modelsIf you have any questions please contact us for help..
£2.55
Model: all models
Stock: In Stock
This rubber pad or grommet fits around the Bonnet and rear Engine Lid aperture
Fiat Part No: 973834
to fit:
Classic Fiat 50..
£0.55
Model: all models
Stock: In Stock
This rubber cone shaped grommet fits onto the front panel and the bonnet closes down onto it
It is also used on the sunroof to stop the handle
..
£0.95
Model: all models
Stock: In Stock
This kit fits around the aperture of the front Bonnet Seal to make the opening and closing
smoother and keep the gaps consistent
to fit:
Cl..
£5.95
Model: all models
Stock: In Stock
To fit over the Brake and Clutch Pedal to add grip
Fiat Part No: 7685883
to fit:
Classic Fiat 500 all models (up to 1974)
Fiat 126..
£2.45
Model: all models
Stock: In Stock
Rubber Seal/Gasket to fit between the Bumper Bracket and the bodywork
and prevent any marks or damage
to fit:
Classic Fia..
£0.95
Model: all models
Stock: In Stock
This is a set of FOUR Rubber Seal/Gasket to fit between the Bumper Bracket and the bodywork
and prevent any marks or damage
to fit:
..
£3.95
Model: Classic Fiat 500 Giardiniera all models
Stock: In Stock
This is a 2 piece gasket kit for both sides of the Carburetor Spacer as per diagramNo's 2 & 4 in the diagramto fit:Classic Fiat 500 Giardiniera al..
£2.95
Model: Classic Fiat 500 & 126 all models
Stock: Out Of Stock
Rubber Plugs to hold the Aluminium Chassis Plate
Supplied as a kit of TWO Rubber Plugs
to fit:
Classic Fiat 500 all models
Fiat 126 all mo..
£3.95
Model: Classic Fiat 500 F/L/R all models
Stock: In Stock
Made in ItalyThis is a Black Plastic Plug that fits into the hole where the check strap bolt fits intoto fit:Classic Fiat 500 F/L/R all modelsIf you h..
£1.25
Model: Classic Fiat 500, 600 & 126 all models
Stock: In Stock
Roll of Rubber Seal for Quarter Light Frame x 2
Fits between the Quarter Light Glass and the Chrome Frame
to fit:
Classic..
£9.95
Model: Classic Fiat 500 N/D/F/L/R & 126 Air Cooled all models
Stock: In Stock
Brand NewMade in ItalyThis is a Fibre Gasket to fit the Hub onto the Fan Casing and stop it resonatingFiat Part No: 4018701 to fit:Classic Fiat 5..
£0.95
Model: Classic Fiat 500R (594cc), 126 series 1 (594cc)
Stock: Out Of Stock
This is for ONE Copper Base gasket to fit onto the block under the BarrelTo fit 594cc (73.50mm Piston Size) EngineInside diameter 81.5mmto fit:Classic..
£3.95
Model: Classic Fiat 500 (650cc), 126 (650cc) all models
Stock: In Stock
This is for ONE Copper Base gasket to fit onto the block under the BarrelTo fit 650cc (77.00mm Piston Size) EngineInside diameter 83.5mmto fit:Classic..
£3.95
Model: Classic Fiat 500 & 126 (with 650cc Engine)
Stock: In Stock
Brand NewMade in ItalyThis Copper Head Gasket is 0.6mm Thickness
Piston Size 77mm (650cc)
to fit:
Classic Fiat 500 (with 650cc Engi..
£16.95
Model: 499cc
Stock: In Stock
This is a standard Cylinder Head Gasket
to fit:
Classic Fiat 500 D/F/L 499cc (from 1966 to 1972)
If you have any questi..
£8.95
Model: 594cc
Stock: In Stock
This is a standard Cylinder Head Gasket
to fit:
Classic Fiat 500 R 594cc (from 1970 to 1974)
Fiat 126 594cc Early..
£7.95
Model: 650cc
Stock: In Stock
This is a standard Cylinder Head Gasket
to fit:
Classic Fiat 500 (with 650cc Engine)
Fiat 126 650cc air cooled (up to 1999)
(Does Not Fit ..
£7.95
Model: Classic Fiat 500 N & D, D Giardiniera ,Bianchina
Stock: In Stock
Cylinder Head GasketFiat Part No: 4037729to fit:Classic Fiat 500 Nuova & D (up to 1966)Classic Fiat 500 D Giuardiniera (up to 1966)Autobianchi Bia..
£17.95
Model: Classic Fiat 500 N/D/G (suicide door)
Stock: In Stock
Rubber Strap with reinforced holes at either end that connects to the Door to stop it flying back
There is one fitted per door
Price i..
£12.95
Model: all models
Stock: In Stock
This rubber pad or grommet fits around the Door aperture on the top and bottomThere are TWO per Door
to fit:
Classic F..
£0.75
Model: (Top & Rear) all models
Stock: In Stock
This Rubber & Metal Channel is measured for ONE Door
As you can see from the additional photos it should fit along the top edge of the door and d..
£9.95
Model: Fiat 500 Topolino B - C Berlina - Giardinetta
Stock: In Stock
Full Engine Gasket Set
to fit:
Fiat 500 Topolino B, C Berlina, Giardinetta 570cc 50mm (from 1949 to 50)
&nb..
£64.95
Model: Fiat Topolino SIMCA 5 (from 1936 to 47)
Stock: In Stock
New Stock OE Quality made in ItalyConsists of1x Copper Head Gasket1x Copper Exhaust Gasket1x Carburettor Gasket1x Sump GasketPLUS Ma..
£94.95
Model: all models
Stock: In Stock
These Grommets fit either side of the aperture of the rear Engine Lid to make the opening and closing
smoother and keep the gaps consistent
..
£2.00
Model: Classic Fiat 500 & 126
Stock: In Stock
This Gasket fits between the Exhaust and the Manifold/Elbow
You would normally change them as a pair
to fit:
Classic Fia..
£1.75
Model: Classic Fiat 500 Giardiniera, 126 Bis 704cc
Stock: In Stock
This Gasket fits between the Exhaust and the Manifold
to fit:
Classic Fiat 500 Giardiniera (estate) all models
Fiat 126..
£2.95
Model: Classic Fiat 500 & 126
Stock: In Stock
This Gasket fits between the Exhaust Manifold/Elbow and the Engine
You would normally change them as a pair
to fit:
Classic Fiat 50..
£1.95