Menu
Your Cart

Classic Fiat 500 Bearings

Model: Classic Fiat 500, 600 & 850 early models Stock: In Stock
This is the old fashioned Castle Slotted Type Nut that requires locking with a split pin through the hub  Fiat Part No: 4037820   to fit:..
£3.95
Model: Classic Fiat 500 R & 126 all models Stock: In Stock
Clutch Thrust Bearing   to fit: Classic Fiat 500 R (594cc) all models Fiat 126 all models including (BROWN, FSM, DE-VILLE, BIS)   If y..
£14.95
Model: Classic Fiat 500 F,L,R & 126 all air cooled models Stock: In Stock
Brass Repair BushThis Bush is used to repair the hole in the Engine Crankcase where the Camshaft rotates and can be prone to wearto fit:Classic Fiat 5..
£29.95
Model: Classic Fiat 500 all models & 126 early Stock: In Stock
Front Grease Cap fits on the Front Hub and acts as a dust & dirt shield   Fiat Part No: 986377 to fit: Classic Fiat 500 all models Fiat ..
£2.95
Model: Classic Fiat 500 all models Stock: In Stock
This Lock Washer fits behind the Front Hub Nut that screws onto the Stub Axle Fiat Part No: 985781   to fit: Classic Fiat 500 all..
£2.25
Model: Classic Fiat 500, 126 all models Stock: In Stock
Made in Italy +/- 0.20 Size   Fiat Part No: 4271967   to fit: Classic Fiat 500 all models Fiat 126 all models  ..
£59.95
Model: Classic Fiat 500, 126 all models Stock: In Stock
Made in Italy +/- 0.20 Size   These are HARDENED STEEL Bearings designed for high revving tuned engines   to fit: Classic ..
£109.95
Model: Classic Fiat 500, 126 all models Stock: In Stock
Made in Italy +/- 0.40 Size   Fiat Part No: 4271968 to fit: Classic Fiat 500 all models Fiat 126 all models   If you have any querie..
£29.95
Model: Classic Fiat 500, 126 all models Stock: In Stock
Best Quality Available Made In ITALY   Standard Size   to fit: Classic Fiat 500 all models Fiat 126 all models &..
£59.95
Model: Classic Fiat 500, 126 all models Stock: In Stock
Best Quality Available Made In ITALY   This is a HARDENED STEEL Bearing for high revving engines   to fit: Classic Fia..
£109.95
Model: Classic Fiat 500 & 126 all models Stock: In Stock
Set of SIX Bolts and Spring Washers to attach the Front Main Crank Bearing   to fit: Classic Fiat 500 N/D/F/L/R & Giardiniera all mo..
£3.50
Model: Classic Fiat 500,126 early models Stock: In Stock
This is a metal C-Clip that supports the Rear Hub BearingSupplied as ONE Clip to fit:Classic Fiat 500 D/F/L/R all modelsFiat 126 all early models..
£3.45
Model: Classic Fiat 500 all models & 126 early up to 1977 Stock: In Stock
This Kit is for ONE WHEELThis Kit consists of: 1 x Outer Wheel Bearing 1 x Inner Wheel Bearing 1 x Oil Seal 2 x Front Hub Nut (left & ..
£19.95
Model: Classic Fiat 500G, 126 late & 600 all models Stock: In Stock
This Kit consists of: 1 x Outer Wheel Bearing 1 x Inner Wheel Bearing 1 x Oil Seal 2 x Front Hub Nut (left & right)   to fit: Classic..
£24.95
Model: Classic Fiat 500 all models & 126 early up to 1977 Stock: In Stock
Original Quality Parts made by SKF   This Kit consists of: 1 x Outer Wheel Bearing 1 x Inner Wheel Bearing 1 x Oil Seal 2 x Fro..
£34.95
Model: Classic Fiat 500G, 126 late, 600 & 850 all models Stock: In Stock
Original Quality Parts made by SKF   This Kit consists of: 1 x Outer Wheel Bearing 1 x Inner Wheel Bearing 1 x Oil Seal 2 x Front Hub Nut (..
£35.95
Model: Classic Fiat 500, 126 all models Stock: In Stock
 Brand New This is a FOUR piece kit containing the front and rear Bearings for both inner gearbox shafts   We have the TWO Differen..
£49.95
Model: Classic Fiat 500 & 126 all models Stock: In Stock
If there is a whining noise coming from the gearbox then the chances are its the Diff Bearings making the noise Common fault on these models &nb..
£14.95
Model: Classic Fiat 500,126,600,850 all models Stock: Out Of Stock
This is a Bronze Bush that fits inside the gearbox input shaft housing on top of the Oil SealDimms: OD 28.5mmID 17mmDepth 9mmto fit:Classic Fiat ..
£8.95
Model: Classic Fiat 500,126,600,850 Stock: In Stock
This is the left hand side Front Hub Nut that screws onto the Stub Axle Fiat Part No: 14043971 M14 x 1.5mm  to fit: Classic Fiat 500 all mod..
£1.95
Model: Classic Fiat 500,126,600,850 Stock: In Stock
This is the right hand side Front Hub Nut that screws onto the Stub Axle Fiat Part No: 14044671 M14x1.5mm  to fit: Classic Fiat 500 all mode..
£1.95
Model: Classic Fiat 500 all models & 126 early Stock: In Stock
Polished Chrome Front Grease Cap fits on the Front Hub and acts as a dust & dirt shieldDiameter 34.5mm   Fiat Part No: 986377 to fit: Cla..
£5.95
Model: Classic Fiat 500,126 & 600 all models Stock: In Stock
This is a metal C-Clip that supports the Rear Hub BearingSupplied as ONE Clip Fiat Part No: 4113070to fit:Classic Fiat 500 all modelsFiat 126 all..
£3.45
Model: all models Stock: In Stock
Rear Hub Nut Fiat Part No: 14045471   to fit: Classic Fiat 500 all models  (up to 1974) Fiat 126 all models (up to 1999)Fiat 600Fiat 85..
£2.50
Model: Classic Fiat 500,126 & 600 all models Stock: In Stock
Brand New Made in ItalyThis is a thick metal spacer to fit into the rear hub between the bearings (see diagram)Fiat Part No: 890292to fit:Classic..
£3.95
Model: Classic Fiat 500, 126 all models Stock: In Stock
Made in Italy   +/- 0.20 Size   Fiat Part No: 4108756   to fit: Classic Fiat 500 all models Fiat 126 all models   If you..
£39.95
Model: Classic Fiat 500, 126 all models Stock: In Stock
Made in Italy   +/- 0.40 Size   Fiat Part No: 4108757 to fit: Classic Fiat 500 all models Fiat 126 all models   If you have an..
£39.95
Model: Classic Fiat 500, 126 all models Stock: In Stock
Best Quality Available Made IN ITALY   Standard Size   to fit: Classic Fiat 500 all models Fiat 126 all models &..
£59.95
Model: Classic Fiat 500 & 126 all models Stock: In Stock
Set of SIX Bolts and Spring Washers to attach the Rear Main Crank Bearing   to fit: Classic Fiat 500 N/D/F/L/R & Giardiniera all models F..
£3.50
Model: Classic Fiat 500 N/D early models Stock: Out Of Stock
Collapsable Rear Wheel Bearing SpacerWidth 13.5mm52mm x 25.9mm x 15.5mm   Fiat Part No: 980753 (no 19 in diagram) to fit: Classic Fiat 500 N/..
£26.95
Showing 1 to 30 of 41 (2 Pages)