Suspension

This Abarth Lowered Leaf Spring fits at the front of the car from left to right (wheel to wheel)The eyelets at each end have been reversed to lower down by aprox 20mm, has a bushat either end that attaches to the Stub Axles/KnucklesThis Spring is a 5 Leafto fit: ..

This Abarth Lowered Leaf Spring fits at the front of the car from left to right (wheel to wheel)The eyelets at each end have been reversed to lower down by aprox 20mm, has a bushat either end that attaches to the Stub Axles/KnucklesThis Leaf Spring has an extra Leaf for strength  6..

This is a high Tensile Bolt and Nut to fit through the Bottom of the Front Steering KnuckleM10 x 95mmto fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600Fiat 850If you have any questions please contact us for help..

Sports Rear Suspension Coil Spring Kit Supplied as a matching pair only Stiffer and Shorter Finished in Ferrari Red (14.5 Gauge Spring) 185mm Lengthto fit:Classic Fiat 500 all models (up to 1973)If you have any questions please feel free to ask for help..

Brand NewAdjustable Abarth Strut/Stabilizer Bar/BraceFerrari Red Powder Coated FinishTo fit Front of the carto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all modelsIf you have any questions please conatct us..

This Rubber Bump Stop has a threaded bolt to attachto fit:Classic Fiat 500 all Models D/N/F/L/R/GFiat 126 all modelsIf you have any questions please contact us for help..

Pair of Front Camber Adjustment Brackets30mm AdjustmentThese Brackets are designed to raise the front Suspension Arms which will give 30mm more Camber at the front of the car They are a simple 2 Bolt fit, no welding or other modification required They are especially recomme..

DISCLAIMERPLEASE BE AWARE THAT THIS IS A RETRO-FIT ITEM WHICH COMES WITH NO CERTIFICATIONS. IT IS IMPERATIVE THAT THIS PRODUCT IS FITTED BY A QUALIFIED MECHANICAL ENGINEER WHO UNDERSTANDS RETRO-FITTING TO ENSURE IT IS FITTED CORRECTLY AND SAFELY.IIIWhile the Front Leaf Spring can..

Brand NewMade in ItalySTANDARD FIVE LEAFThis Leaf Spring fits at the front of the car from left to right (wheel to wheel)Has a tendency to lose its spring effect over time and will become flatter, has a bushat either end that attaches to the Stub Axles/Knuckles..

OE QualityMade in ItalyMetal Clamp with a rubberised finish that clamps around the front Leaf Springto hold it in placeto fit:Classic Fiat 500 all modelsAutobianchi Bianchina all modelsIf you have any questions please contact us for help..

This Rubber Bush locates into the aluminium support that the Front Leaf Spring is secured toto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all models (up to 1999)If you have any questions please feel free to ask..

This Aluminium Support holds the front leaf spring to the underneath of the chassisto fit:Classic Fiat 500 D/F/L/R/G all modelsIf you have any questions please feel free to ask..

High Quality Productmade by major manufacturer in ItalyThis metal and rubber bush fits into the Front Leaf Spring at each end and also into the Front Stub AxleDimmensons:Inner Diameter [mm] 10Outer Diameter [mm] 27Height 1 [mm] 45Height 2 [mm] 51to..

OE Quality PartsMade in Italy by OSRAVThis Shock Absorber comes with all Rubber Bushes and Nuts, ready to fitTo fit:Classic Fiat 500 all modelsFiat 126 all modelsIf you have any queries or questions please feel free to ask..

OE Quality PartsRubber Bush to fit onto the top and bottom of the Front Shock AbsorberDimmension:Outer Diameter 27mm, Inner 9mm, Thickness 15mmto fit:Classic Fiat 500 all models (up 1974)Fiat 126 all modelsIf you have any questions or queries please feel..

This kit is a full kit of rubber bushes, metal washers and nyloc nuts required for ONE shock absorberDimmension:Outer Diameter 27mm, Inner 9mm, Thickness 15mmto fit:Classic Fiat 500 all models (up 1974)Fiat 126 all modelsIf you have any questions or queries p..

These Shock Absorbers are Stiffer and ShorterFinished in Ferrari RedSupplied as a pair (2) with all Rubber Bushes and Nuts, ready to fitTo fit:Classic Fiat 500 all models (up to 1974)126 all air cooled models (up to 1999)(will NOT fit the 126 Bis)If yo..

High Quality Productmade by major manufacturer in ItalySupplied as ONE BushThis metal and rubber bush fits into the Front Suspension Arms/WishbonesDimmensons:Inner Diameter [mm]12Outer Diameter [mm] 25Length of Bush [mm]28Height total [mm] 26.5..

High Quality Productmade by major manufacturer in ItalySupplied as ONE BushThis metal and rubber bush fits into the Front Suspension Arms/WishbonesDimmensons:Inner Diameter [mm] 14Outer Diameter [mm] 29Length of bush [mm] 30.5Height total [mm] 30 ..

Brand NewMade in ItalyThis metal shim used to slide in between the spacer and the eyelets to adjust the camber at the front wheelsThis is for ONE ShimThickness 1mmto fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600 all modelsIf you have any questions please contact us for help..