Centre and Dash Parts

Made in ItalyThis is the original textured black Plastic Cover that fits onto the Dashboardto fit:Classic Fiat 500 L all models..

This two piece Padded Dashboard kit bolt's onto the dashboard and has studs built into them with a black plastic trim attached as originalThey are made to fit Left Hand Drive model 500's but will fit Right Hand Drive versions with simplemodifications, you would simply need to make new h..

This two piece Padded Dashboard kit bolt's onto the dashboard and has studs built into them with a black plastic trim attached as originalto fit:Classic Fiat 500 N,D & Giardiniera all modelsIf you have any questions please feel free to ask..

This two piece Padded Dashboard kit bolt's onto the dashboard and has studs built into themThey are made to fit Left Hand Drive model 500's but will fit Right Hand Drive versions with simplemodifications, you would simply need to make new holes to line up with the studsto fit:Cl..

Made in ItalyThis part is designed to hold a speaker 120mm in diameter and also doubles as adoor pocket using the same holes to attach as the original door pocketIf you doors have a pocket then these will fit straight on, otherwise if not you will needto make the holes to f..

This two piece Padded Dashboard kit bolt's onto the dashboard and has studs built into themThey are made to fit Left Hand Drive model 500's but will fit Right Hand Drive versions with simplemodifications, you would simply need to make new holes to line up with the studsto fit:Cl..

This is a large foam sheet 1600mm x 2000mmThe Thickness is 6mmThis can be used to pad the rear seats before you put new covers onHelps to smooth out any lumps and bumps for a smooth padded lookCan also be used for other interior upholstery like sun visors, roof linings, doo..

This two piece Padded Dashboard kit bolt's onto the dashboard and has studs built into themThey are made to fit Left Hand Drive model 500's but will fit Right Hand Drive versions with simplemodifications, you would simply need to make new holes to line up with the studsto fit: ..

This black plastic console fits between the front seats on the floor and covers the holes for the hand brake and gear leverSupplied with screws to fitto fit:Classic Fiat 500Fiat 126 early models..

Made in ItalyIf you are planning to fit a Radio/Cassette/Cd to your Fiat 500 then this could bethe answer, fits in the center between the floor and the dashboard and is designedto take a standard size Radio/Cass/Cd player, and also a Cigar Lighter leaving roomat the bottom ..

Made in ItalyThese Plastic Door Pockets have a smooth finishThis black plastic door pocket fits onto the inside of the doorThere are threaded studs moulded into the pocket to fit to the door panelto fit:Classic Fiat 500 F/L/R all models (up to 1974)..

Made in ItalyThese Plastic Door Pockets have a textured finishThis black plastic door pocket fits onto the inside of the doorThere are threaded studs moulded into the pocket to fit to the door panelto fit:Classic Fiat 500 F/L/R all models (up to 1974)..

This black plastic Tray fits underneath the dashboard in the centerto fit:Classic Fiat 500 all models (up to 1974)If you have any questions please feel free to ask for help..

This Black Cover is for the Gear LeverVery easy to fit, remove the Centre Console and place Cover over the Gear Lever and tighted the black string to secureOnce you replace the Centre Console it will hide the baseto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 early ..

This Red Cover is for the Gear LeverVery easy to fit, remove the Centre Console and place Cover over the Gear Lever and tighted the black string to secureOnce you replace the Centre Console it will hide the baseto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 early mod..

This is a tailored kit of Black Faux Leather Covers for the Hand Brake & Gear Leverto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 early modelsIf you have any questions please feel free to ask for help..

This is a tailored kit of Blue Faux Leather Covers for the Hand Brake & Gear Leverto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 early modelsIf you have any questions please feel free to ask for help..

This is a tailored kit of Ferrari Vinyl Covers for the Hand Brake & Gear Leverto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 early modelsIf you have any questions please feel free to ask for help..

This is a Center Console made of wood and finished in padded Red Vinyl to match the Seats and Door PanelsThe Pockets are lined in VelvetIt has a opening hinged door for in the center and a front compartmentIf you were thinking about fitting a Radio/CD player then this would ..

MADE IN ITALYThis two piece Padded Dashboard kit bolt's onto the dashboard and has studs built into themThey are made to fit Left Hand Drive model 500's but will fit Right Hand Drive versions with simplemodifications, you would simply need to make new holes to line up with the studs..