Menu
Your Cart

Classic Fiat 500 Screws,Studs,Bolts & Nuts

screw,stud,bolt,nut,brass,

Model: Classic Fiat 500N,D,F,L,R & 126 all air cooled models Stock: In Stock
When you change over to an Alloy Rocker Cover on a Classic Fiat 500 or 126 the Studs are usually too short to reach, as the Alloy Covers are higherThi..
£11.94
Ex Tax:£9.95
Model: classic Fiat 500 various, early 126 (up to 1978) Stock: In Stock
This Wheel Bolt has a Tapered Head with Chrome Finish to fit various wheels Dimms:  Bolt Diameter M10mm x 1.5 (35mm),  Total Length 50..
£2.39
Ex Tax:£1.99
Model: classic Fiat 500 various, early 126 (up to 1978) Stock: In Stock
This Wheel Bolt has a Flat Head with Domed Chrome Finsh to fit various wheels Dimms:  Bolt Diameter M10mm x 40mm,  Total Length 60mm to fi..
£2.39
Ex Tax:£1.99
Model: Classic Fiat 500, 126 all air cooled models Stock: In Stock
This Stud is used to mount the Carb onto the Cylinder Head   Fiat Part No: 9908551 Dimms: M6 x 56mm   to fit: Classic Fiat..
£2.34
Ex Tax:£1.95
Model: Classic Fiat 500, 600 & 850 early models Stock: In Stock
This is the old fashioned Castle Slotted Type Nut that requires locking with a split pin through the hub  Fiat Part No: 4037820   to fit:..
£4.74
Ex Tax:£3.95
Model: all models Stock: In Stock
This Long Chrome Bolt comes with a new Washer and Nut   The Long Chrome Bolts are made to fit the Knudge Bars and Bumpers onto the car &..
£3.54
Ex Tax:£2.95
Model: all models Stock: In Stock
This Chrome Bolt has a large Domed Head to fit flush with the Bumper and comes with a new Washer and Nut   (If your Classic Fiat 500 has Ch..
£3.54
Ex Tax:£2.95
Model: Classic Fiat 500 all models (up to 1974) Stock: In Stock
This Chrome Wheel Bolt fits into the center of the Wheel to secure the Hub CapSupplied with a Spring Washer   to fit: Classic Fiat 500 all ..
£3.06
Ex Tax:£2.55
Model: All models Stock: In Stock
Clutch Cable Securing Stud & Nuts   to fit: Classic Fiat 500 all models Fiat 126 all models   If you have any questions please con..
£3.54
Ex Tax:£2.95
Model: Classic Fiat 500 & 126 all models Stock: In Stock
This is a PAIR (2) of Bolts and Buts for the Con RodIts recommended to change these when you do an engine rebuildto fit:Classic Fiat 500 all modelsFia..
£19.14
Ex Tax:£15.95
Model: Classic Fiat 500N/D/F/L all models Stock: In Stock
Set of 8 Cylinder Head Studs complete with Washers & Domed Nuts   to fit: Classic Fiat 500 N/D/F/L all models   If you have any..
£57.54
Ex Tax:£47.95
Model: Classic Fiat 500, 126 all models (EXC BIS) Stock: In Stock
Set of 8 Cylinder Head Studs complete with Washers & Domed Nuts    to fit: Classic Fiat 500R 594cc all models Fiat 126 all air coole..
£65.94
Ex Tax:£54.95
Model: Classic Fiat 500 D/F/L all models Stock: In Stock
This Hollow Bolt is screwed into the Cylinder at either side and acts as a vent to relieve the pressure in the event of a Head Gasket Failure  ..
£3.54
Ex Tax:£2.95
Model: Classic Fiat 500,126 & 600 all models Stock: In Stock
This Stainless Steel Bolt screws into the sides of the Distributor body to attach the metal spring clips to hold the Distribtor Cap in place Supplied..
£3.54
Ex Tax:£2.95
Model: Classic Fiat 500,126 & 600 all models Stock: In Stock
These Stainless Steel Bolts screw into the sides of the Distributor body and attach the metal spring clips to hold the Distribtor Cap in place Suppli..
£9.54
Ex Tax:£7.95
Model: Classic Fiat 500, 126 all air cooled models Stock: In Stock
Brand NewMade in ItalyThis is the screw to secure the contact points into the distributorto fit:Classic Fiat 500 all modelsFiat 126 all air cooled mod..
£1.74
Ex Tax:£1.45
Model: Classic Fiat 500 F/L/R all models (up to 1974) Stock: In Stock
This is a kit of two new hinge pins and two bushes to tighten the hinges and stop them from dropping   One Kit is for ONE Door   to ..
£5.46
Ex Tax:£4.55
Model: Classic Fiat 500 N/D/F/L/R & Giardiniera all models Stock: In Stock
This Plastic Insert & Screw fits into the Door where the Quarter Light is attached There are TWO of these fitted per Door   to fit: Class..
£1.14
Ex Tax:£0.95
Model: all models Stock: In Stock
Set of FOUR Bolts & Spring Washers to fit the drive shaft coupling and flange   Fiat Part No: 16044121   to fit:   Classic Fi..
£4.74
Ex Tax:£3.95
Model: Classic Fiat 500 N/D/F/L all models Stock: In Stock
Made in ItalyThese are the Studs that screw into the top of the Timing Chain Cover to support the Engine MountingLength 70mmto fit:Classic Fiat 500 N/..
£7.14
Ex Tax:£5.95
Model: Classic Fiat 500R & 126 all air cooled models Stock: In Stock
Made in ItalyThese are the Studs that screw into the top of the Timing Chain Cover to support the Engine Mountingto fit:Classic Fiat 500 R (or with 65..
£7.14
Ex Tax:£5.95
Model: Classic Fiat 500 & 126 Stock: In Stock
This is a pair of high tensile Bolts and Spring Washers to fit the Exhaust Manifolds   to fit: Classic Fiat 500 all models (except Gi..
£2.34
Ex Tax:£1.95
Model: all models Stock: In Stock
This Brass Nut is used to attach the Exhaust to the Manifold   (8mm x 1.25 x 8)   to fit: Classic Fiat 500 all models Fiat 1..
£1.14
Ex Tax:£0.95
Model: Classic Fiat 500 & 126 Stock: In Stock
This is a kit of high tensile Flat Edged Bolts and Spring Washers to fit the Exhaust ManifoldsSupplied with Brass Nuts   to fit: Classic Fi..
£8.34
Ex Tax:£6.95
Model: all models Stock: In Stock
This Stud is used to attach the Exhaust to the Manifold/Engine   (8mm x 1.25 x 42)   to fit: Classic Fiat 500 all models Fiat..
£1.14
Ex Tax:£0.95
Model: Classic Fiat 500, 126 all air cooled models Stock: In Stock
This is a set of 6 Bolts & Washers to attach the Aluminium Crank Pulley Cover that houses the Oil Pump & Filter   Fiat Part No: 1382362..
£3.54
Ex Tax:£2.95
Model: Classic Fiat 500 all models Stock: In Stock
This Lock Washer fits behind the Front Hub Nut that screws onto the Stub Axle Fiat Part No: 985781   to fit: Classic Fiat 500 all..
£2.70
Ex Tax:£2.25
Model: Classic Fiat 500 & 600 all models Stock: In Stock
Stainless Steel Screw to fit the Front Indicator Lamp   to fit: Classic Fiat 500 all models  Fiat 600 all models   If you have an..
£0.30
Ex Tax:£0.25
Model: Classic Fiat 500 & 126 all models Stock: In Stock
Set of SIX Bolts and Spring Washers to attach the Front Main Crank Bearing   to fit: Classic Fiat 500 N/D/F/L/R & Giardiniera all mo..
£4.20
Ex Tax:£3.50
Model: Classic Fiat 500, 126, 600, 850, 900 all models Stock: In Stock
This Stud is used to attach the Fuel Pump to the Engine TWO required in total for one engine   (8mm x 1.25 x 51)   to fit: Classic..
£2.34
Ex Tax:£1.95
Showing 1 to 30 of 71 (3 Pages)