Clutch and Transmission Parts

Made in ItalyThis is a Chrome Extension thats fits onto the standard gear lever and is secured with grub screwsHas a slight angle to bring the gear knob closer or further away to the driverThreaded at the top to accept a gear knobTotal Length 210mmto fit:Classic Fi..

Made in ItalyThis is a Chrome Extension thats fits onto the standard gear lever and is secured with grub screwsHas a slight angle to bring the gear knob closer or further away to the driverThreaded at the top to accept a gear knobTotal Length 150mmto fit:Classic Fi..

These bolts and washers are used to install the clutch plate onto the flywheelThis is a kit of6x Bolt high tensile6x Spring Washerto fit:Classic Fiat 500 all modelsFiat 124Fiat 125Fiat 126Fiat 127Fiat 128Fiat 600Fiat 850Fiat 900..

Clutch Cable Adjustment Nut This Threaded Domed Nut fits at the end of the Clutch Cable onto the Gearbox Lever to adjust Supplied with 2 additional nuts to fit:Classic Fiat 500 D,F,L,R,G all modelsFiat 126 all modelsFiat 600 all models If y..

Clutch Cable Adjustment NutThis Threaded Domed Nut fits at the end of the Clutch Cable onto the Gearbox Lever to adjustDomed Nut is 20mm in lengthSupplied with 2 additional nutsto fit:Classic Fiat 500 D,F,L,R,G all modelsFiat 126 all modelsFiat 600 all mode..

Clutch DiscSix Course-spline TypeExtra Strength Six Spring DiscDiameter -155mmto fit:Fiat 600 & Multipla all early modelsIf you have any questions please contact our office for help..

Clutch DiscMade in ItalyTwenty Fine-spline TypeSix Spring DiscDiameter 160mmto fit:Fiat 600D all modelsFiat 600 Multipla all late modelsFiat 850 all modelsFiat 900T/E all modelsIf you have any questions please contact our office for help..

Clutch Forkto fit:Fiat 600 & Multipla all modelsIf you have any questions please contact us for help..

Three Piece Kit consisting of1x Clutch Pressure Plate1x Friction Disc (fine spline)1x Thrust BearingLate Type with 20 Spline shaftto fit:Fiat 600, Multipla all late modelsIf you have any questions please contact us for help..

Three Piece Kit consisting of1x Clutch Pressure Plate1x Friction Disc (fine spline)1x Thrust BearingEarly Type with six splined shaftto fit:Fiat 600, MultiplaIf you have any questions please contact us for help..

This is located at the Clutch Pedal to give it resistance and return it to its normal position Fiat Part No: 4061033 to fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all models (up to 1999)Fiat 600 all models If you have any questions please feel free to ask..

Brand NewMade in Italyto fit:Fiat 600 all models..

Wire Clip to hold the Clutch Release Bearing in positionFiat Part No: 878848to fit:Fiat 600 all modelsIf you have any questions please contact us for help..

Clutch Thrust Bearing Fiat Part No: 4136712,4230531,4336850to fit:Fiat 600 all modelsFiat 500C Belvedere all modelsIf you have any questions please contact us for help..

Brand NewMade in ItalyClutch Thrust Bearingto fit:Fiat 600 & 750 all modelsIf you have any questions please contact us for help..

Genuine SKF BrandThis is the Bearing thats is located in the Differential of the Gearbox65mm x 95mm x 16mmto fit:Fiat 600 all modelsAlso fits Seat & ZastavaIf you have any questions please contact us for help..

This Seal fits on the bulkhead between the engine and gearbox (see diagram)to fit:Fiat 600D all modelsIf you have any questions please contact us for help..

Flywheel Ring Gear Dimensions: O.D. 247mm I.D. 222mm Thickness 12mm 115 Teeth Fiat Part No: 4109024to fit:Fiat Uno 903ccFiat Panda 903ccFiat 850 (1964-1971)Fiat 850 Spider (1965-1968)Fiat 850 Coupé (1965-1968)Fiat 850 Spéciale (1968-1971)Fiat 850 Sport Coupé (1968-1..

Genuine OE Quality PartsDIMENSIONS d 25 mm Bore diameter D 52/56 mm Outside diameter B 15 mm Widthto fit:Fiat 600D all modelsFiat 600 MultiplaSeat & Zastava 600/750 a..

This is an Original Style Rubber Gear Lever Bootto fit:Fiat 600 all modelsClassic Fiat Multipla all modelsIf you have any questions please contact us for help..