Clutch & Transmission Parts
Model: 750cc,899cc,903cc & 999cc
Stock: In Stock
Brand NewThree Piece ClutchClutch Diameter: 170mm
to fit:
Fiat Cinquecento 899cc
Fiat Seicento 899cc
Fiat Uno 903cc & 999cc..
£83.94
Ex Tax:£69.95
Model: Fiat & Alfa Romeo Various Models
Stock: In Stock
Common Failure on many Fiat & Alfa Models
This Shaft holds the Thrust Bearing in place inside the Gearbox and is prone to wear
Shaft is supplied..
£30.60
Ex Tax:£25.50
Model: Classic Fiat 500 F/L/R & 126 all models
Stock: In Stock
Made in ItalyThis is a kit of TWO Metal Clips to hold the Clutch Thrust Bearing in placeFiat Part No: 4127040to fit:Classic Fiat 500 F/L/RFiat 126 all..
£2.34
Ex Tax:£1.95
Model: all late models
Stock: Out Of Stock
If the Gear Lever feels a bit loose and the gearchange has become vague then its normally due to the worn bushes on the linkage
This kit will supply ..
£17.94
Ex Tax:£14.95
Model: Classic Fiat Panda all models inc 4x4
Stock: In Stock
This is the rubber cover that protects the Gear Linkage at the bottom of the gear lever underneath the carNo 18 in the Diagramto fit:Classic Fiat Pand..
£14.34
Ex Tax:£11.95
Model: all early models
Stock: Out Of Stock
If the Gear Lever feels a bit loose and the gearchange has become vague then its normally due to the worn bushes on the linkage
This kit will supply..
£11.94
Ex Tax:£9.95
Model: Classic Fiat Panda 4x4, 127 all models
Stock: In Stock
Brand NewMade in ItalyThis is for a PAIR (2) of Bushes as per phototo fit:Classic Fiat Panda 4x4 all models (from 1985 to 2002)Fiat 127 all models (19..
£2.34
Ex Tax:£1.95
Model: Fiat, Alfa Romeo & Lancia many models
Stock: In Stock
Brand NewMade in ItalySold as a PAIR (2) of BushesFiat Part No: 4259848,60806087This Gear Linkage Bush fits onto the ball joints to make the gear chan..
£2.34
Ex Tax:£1.95
Model: Classic Fiat Panda 4x4 all models (86 to 2002)
Stock: In Stock
Brand New Genuine Fiat PartFiat Part No: 7652858 (no 1 in diagram)to fit:Classic Fiat Panda 4x4 all models (86 to 2002)If you have any ques..
£117.54
Ex Tax:£97.95
Model: various models
Stock: In Stock
Common Fault on these models due to wear and tear
To fit:
Fiat Uno
Classic Panda various models
P..
£38.34
Ex Tax:£31.95
Model: Classic Fiat Panda, Strada/Ritmo various
Stock: In Stock
Gear Lever Support Bush Mount
Fiat Part No: 5988234
to fit:
FIAT
PANDA (141A_)
1000
156 A2.100
00..
£11.94
Ex Tax:£9.95
Model: Classic Panda 750cc,999cc,1108cc & 4x4, Uno & Y10 999cc
Stock: In Stock
GENUINE OE Fiat Boxed PartsThis is a set of4x Gearbox Bearings2x Gearbox Shaft NutsThis Kit fits 4 & 5 speed Gearboxesto fit;Classic F..
£169.95
Ex Tax:£169.95
Model: Many Classic Italian Car Models
Stock: In Stock
Gearbox Oil for classic and older models 80W-90
Please click this link for more info..
£11.94
Ex Tax:£9.95
Model: Classic Fiat Panda all models (from 1985 to 2003)
Stock: In Stock
Genuine Fiat Parts1st & 2nd Syncronizer RingFiat Part No: 5945612 (no 8 in the diagram)to fit:Classic Fiat Panda all models (from 1985 to 2003)If ..
£71.94
Ex Tax:£59.95
Model: Classic Fiat Panda, Cinquecento & Uno models
Stock: In Stock
Brand NewGenuine Fiat Boxed Part1st & 2nd Gear SyncronizerFiat Part No: 7617533to fit:Classic Fiat Panda all models (1985 to 02)Fiat Uno MK2 903cc..
£71.94
Ex Tax:£59.95
Model: 750cc,899cc,903cc & 999cc
Stock: Out Of Stock
Genuine Fiat Boxed
Three Piece Clutch
Fiat Part No: 5888398,71736578,71711622,5890343,5892110
to fit:
Fiat Cinquecento 89..
£47.94
Ex Tax:£39.95
Model: Prevents loosening on vibrating assemblies
Stock: In Stock
High-strength general threadlocker for maximum efficacyKey FeaturesHigh-strength general threadlocker for maximum efficacyPrevents loosening on v..
£5.94
Ex Tax:£4.95
Model: Suitable for bonding all threaded metal assemblies
Stock: In Stock
A fast curing, single part anaerobic thread-lockerKey FeaturesA fast curing, single part anaerobic thread-lockerA very high strength, low viscosi..
£14.34
Ex Tax:£11.95
Model: From (1987/88 on)
Stock: In Stock
Genuine Fiat Part
Inner Drive Shaft Bearing & Seal
Fits inside the Inner Drive Shaft Boot
to fit:
Classi..
£11.94
Ex Tax:£9.95
Model: Fiat & Lancia Various Models
Stock: In Stock
To fit the Brake & Clutch Pedals only
Dimmensions:
Length 65mm
Width 50mm
Fiat Part No: 4144275
to fit:
Classic Fiat Panda all model..
£3.54
Ex Tax:£2.95
Showing 1 to 20 of 20 (1 Pages)