Menu
Your Cart

Gaskets, Seals,Grommets and Rubber Parts

head,rocker cover,valve,sump,fuel pump,gasket,oil seal,push rod tube,carburettor,oring,seals,washers,fibre,

Model: all models Stock: In Stock
To fit over the Accelerator/Throttle Pedal to add grip   to fit: Classic Fiat 500 all models (up to 1974) Fiat 126 all  models Fiat 600..
£1.95
Model: all models Stock: In Stock
This rubber cone shaped grommet fits onto the front panel and the bonnet closes down onto it It is also used on the sunroof to stop the handle  ..
£0.95
Model: all models Stock: In Stock
To fit over the Brake and Clutch Pedal to add grip   Fiat Part No: 7685883   to fit: Classic Fiat 500 all models (up to 1974) Fiat 126..
£2.45
Model: all models Stock: In Stock
Rubber Seal/Gasket to fit between the Bumper Bracket and the bodywork and prevent any marks or damage   to fit:   Classic Fiat 500 all ..
£0.95
Model: all models Stock: In Stock
This is a set of FOUR Rubber Seal/Gasket to fit between the Bumper Bracket and the bodywork and prevent any marks or damage   to fit:   ..
£3.00
Model: 594cc & 650cc Stock: In Stock
This Gasket fits between the top of the Carburettor and the plastic 90 deg Elbow   For use with WEBER 28 IMB Carburettor   Fiat Part No:..
£1.50
Model: 499cc, 594cc & 650cc Stock: In Stock
This Gasket fits between the Cylinder Head and the Bakerlight Carburettor Spacer   Fiat Part No: 987082   to fit: Classic Fiat 500 all ..
£1.50
Model: 499cc, 594cc & 650cc Stock: In Stock
This Gasket fits between the Carburettor and the Bakerlight Carburettor Spacer   Fiat Part No: 987083   to fit: Classic Fiat 500 all mo..
£1.50
Model: 126, 650cc (Weber 28 IMB) Stock: Out Of Stock
This kit includes the following, all x Gaskets (top,middle & bottom) 1x Filter 1x Needle Valve 2x Rubber O'Ring     ..
£15.95
Model: 500R & Early 126 (Weber 24 & 28 IMB) Stock: In Stock
This kit includes the following, all x Gaskets (top,middle & bottom) 1x Filter 1x Needle Valve 2x Rubber O'Ring     To fit Weber ..
£15.95
Model: 126 BIS, 704cc (WEBER 30 DGF) Stock: In Stock
This kit includes the following, all x Gaskets 1x Needle Valve 1x Diaphram 1x Filter all x Rubber O'Ring & Clips     To fit WEB..
£24.95
Model: 126 BIS, 704cc (WEBER POLSKY 30 S2 HR) Stock: In Stock
This kit includes the following, all x Gaskets 1x Needle Valve 1x Diaphram 4x Rubber O'Ring     To fit WEBER POLSKY 30 S2 HR Carbure..
£17.95
Model: Fiat 126 BIS all models Stock: In Stock
Genuine Fiat Part Top Rubber Carburettor Seal   Fiat Part No: 7612174 (no 3 in diagram) to Fit: Fiat 126 BIS all models   If you have..
£14.95
Model: Classic Fiat 500 & 126 all models Stock: In Stock
Rubber Plugs to hold the Aluminium Chassis Plate Supplied as a kit of TWO Rubber Plugs   to fit: Classic Fiat 500 all models Fiat 126 all mo..
£3.95
Model: Classic Fiat 500, 600 & 126 all models Stock: In Stock
Roll of Rubber Seal for Quarter Light Frame x 2   Fits between the Quarter Light Glass and the Chrome Frame   to fit: Classic Fiat 500 ..
£4.95
Model: Classic Fiat 500,126, 650cc (Weber 28 IMB) Stock: In Stock
This is a comprehensive overhaul kit for the carburettor including these partsMAIN PARTS OE NUMBERS:1 PCS - OE: 9907780 - FLOAT1 PCS - OE: 9904710 - F..
£21.95
Model: Classic Fiat 500 N/D/F/L/R & 126 Air Cooled all models Stock: In Stock
Brand NewMade in ItalyThis is a Fibre Gasket to fit the Hub onto the Fan Casing and stop it resonatingFiat Part No: 4018701 to fit:Classic Fiat 5..
£0.95
Model: Classic Fiat 500R (594cc), 126 series 1 (594cc) Stock: In Stock
This is for ONE Copper Base gasket to fit onto the block under the BarrelTo fit 594cc (73.50mm Piston Size) EngineInside diameter 81.5mmto fit:Classic..
£1.95
Model: Classic Fiat 500 & 126 (with 650cc Engine) Stock: In Stock
Brand NewMade in ItalyThis Copper Head Gasket is 0.6mm Thickness   Piston Size 77mm (650cc)   to fit: Classic Fiat 500 (with 650cc Engi..
£16.95
Model: Water Cooled 704cc BIS Stock: In Stock
These high quality Copper Head Gaskets are designed to be much longer lasting as they are more resistant to high pressure and heat, which the 126 Bi..
£24.95
Model: 594cc Stock: In Stock
This is a standard Cylinder Head Gasket   to fit: Classic Fiat 500 R  594cc  (from 1970 to 1974) Fiat 126  594cc Early..
£7.95
Model: 650cc Stock: In Stock
This is a standard Cylinder Head Gasket   to fit: Classic Fiat 500 (with 650cc Engine) Fiat 126 650cc air cooled (up to 1999) (Does Not Fit ..
£7.95
Model: various models Stock: In Stock
Rubber Seal to fit onto Dipstick   Fiat Part No: 4102056 Dimmensions: Length 47mm   Fits many different models including: &n..
£0.95
Model: (Front) all models Stock: In Stock
This Rubber Channel is measured for ONE Door This Channel fits where the door glass meets the Quarter Light Frame upright (see diagram in related pho..
£4.95
Model: 499cc, 594cc & 650cc most models Stock: In Stock
Fitted between the Rocker Cover and the Air Filter Housing this rubber hose is very important to let the engine breathe   Fiat Part No: 412149..
£5.95
Model: Classic Fiat 500 & 126 Stock: In Stock
This Gasket fits between the Exhaust and the Manifold/Elbow You would normally change them as a pair   to fit:   Classic Fia..
£1.75
Model: Classic Fiat 500 Giardiniera, 126 Bis 704cc Stock: In Stock
This Gasket fits between the Exhaust and the Manifold   to fit:  Classic Fiat 500 Giardiniera (estate) all  models Fiat 126..
£2.95
Model: Classic Fiat 500 & 126 Stock: In Stock
This Gasket fits between the Exhaust Manifold/Elbow and the Engine You would normally change them as a pair   to fit: Classic Fiat 50..
£1.95
Model: Fiat 126 all models Stock: In Stock
This Rubber Bonnet Seal fits around the aperture of the front Bonnet   Comes as a Rubber Seal perfectly cut to size   to fit: Fiat..
£11.95
Model: 500, 126 all models (exc BIS) Stock: In Stock
Original Quality Made by CORTECO in Italy   Fiat Part No:  40000170   to fit: Classic Fiat 500 all models (up to 1974) Fiat 126 ..
£3.95
Showing 1 to 30 of 80 (3 Pages)