Gaskets, Seals,Grommets and Rubber Parts

This is a 20 metre Roll Rubber & Metal ChannelAs you can see from the additional photos it should fit along the top edge of the door and down the back, and the door glass will move up and down inside it13mmx14.5mmto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 a..

This Rubber & Metal Channel is measured for ONE Door to fit along the top and down the rear of the door glass and into the doorAs you can see from the additional photos it should fit along the top edge of the door and down the back, and the door glass will move up and down inside itFiat..

Fitted between the Rocker Cover and the Air Filter Housing this rubber hose is very important tolet the engine breatheto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all air cooled models (up to 1999)If you have queries or questions please feel free to..

These Grommets fit either side of the aperture of the rear Engine Lid to make the opening and closingsmoother and keep the gaps consistentto fit:Classic Fiat 500 all models (NOT Giardiniera)If you have any questions or queries please feel free to ask..

This is for ONE (1) Rubber Pad to fit around the aperture of the rear engine lidNumber 13 in the diagramto fit:Fiat 126 Air cooled all models..

OE Quality PartsMade in ItalyThis pad supports the top of the engine mount spring (see diagram)to fit:Classic Fiat 500 R all modelsFiat 126 air cooled all models..

This kit consists of all the parts to install an exhaust manifold to cylinder head and exhaust1x Exhaust Gasket (RIC 394)1x Exhaust Manifold Gasket Rear (RIC 395)2x Brass Nut & Spring Washer (RIC 939)2x Manifold to Head Bolts & Spring Washers (RIC 1898)to fit:Classic Fia..

Made in ItalyThis is a Rubber Plug to fill the holes on the floor either side of the tunnelThere are usually 6 holes (3 per side)to fill hole 20mm Diameterto fit:Classic Fiat 500 all modelsIf you have any questions please contact us for help..

Made in ItalyThis Rubber Bonnet Seal fits around the aperture of the front BonnetComes as a Rubber Seal perfectly cut to sizeto fit:Fiat 126 all modelsIf you have any questions or queries please feel free to ask..

This Rubber Channel is measured for ONE DoorThis Channel fits where the door glass meets the Quarter Light Frame upright (see diagram in related photos)Narrow TypeFiat Part No: 4070123 (as per diagram in related photos)to fit:Classic Fiat 500 all models up to 1972..

Original QualityMade by CORTECO in Italyto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 594cc & 650cc (up to 1999)(NOT for Water Cooled BIS VERSION)If you have any questions please feel free to contact us..

Original QualityMade by CORTECO in Italy Fiat Part No:  7632453 to fit:Fiat 126 704cc BIS (up to 1992)  If you have any questions please feel free to contact us..

This is the Front Hub Sealto fit:Classic Fiat 500 Giardiniera all modelsFiat 126 652cc & 704cc all models (from 1979 to 1999)Fiat 850 Saloon & Special (from 1964 to 1972)Fiat 900 T/E all models (from 1978 to 1986)If you have any questions please feel f..

OE Quality PartsMade in ItalyThis is the Front Hub Sealto fit:Classic Fiat 500 all models (from 1957 to 1974)Fiat 126 all models (from 1972 to 1978)Engine Sizes (476cc, 499cc, 594cc, 652cc)Autobianchi BianchinaIf you have any questions please feel..

Rubber Seal to fit the Front Indicator Lamp, between the Lens and Bulb Holder to fit:Classic Fiat 500 D all models If you have any questions please contact us for help..

Rubber Gasket for the Front Indicator Lamp (underneath the Head Lamp)to fit:Classic Fiat 500 N/D/F/L/R/G all modelsIf you have any questions please contact us for help..

OE Quality PartsRubber Bush to fit onto the top and bottom of the Front Shock AbsorberDimmension:Outer Diameter 27mm, Inner 9mm, Thickness 15mmto fit:Classic Fiat 500 all models (up 1974)Fiat 126 all modelsIf you have any questions or queries please feel..

This kit is a full kit of rubber bushes, metal washers and nyloc nuts required for ONE shock absorberDimmension:Outer Diameter 27mm, Inner 9mm, Thickness 15mmto fit:Classic Fiat 500 all models (up 1974)Fiat 126 all modelsIf you have any questions or queries p..

Pair of Fuel Tank Strap GasketsMade in CorkThese Cork Gaskets fit under the Tank Strapsto fit:Classic Fiat 500 D/F/L/R/G (with Large Petrol Tank)If you have any questions please contact us for help..

This thick Rubber Seals the Petrol Tank Sender Unit onto the Tank so there are no leaksto fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600 all modelsFiat 850 & 900 all modelsLancia FulviaIf you have any questions please feel free to ask..