Menu
Your Cart

Mechanical & Engine Parts

piston,cylinder,head,block,engine,dipstick,bearing,shells,camshaft,crankshaft,conrod, spacer,sump,flywheel,ring gear,

Model: Classic Fiat 500 & 126 air cooled models Stock: In Stock
This kit consists of1x  Abarth Aluminium Rocker Cover1x  Gasket1x  Abarth Screw On Aluminium Oil Cap1x  St Steel Braided Hoseall x..
£215.94
Ex Tax:£179.95
Model: Classic Fiat 500 R 594cc & 126 all air cooled Stock: In Stock
Brand New Plastic Air Filter Lid   to fit: Classic Fiat 500 R 594cc all models (except Giardiniera)Fiat 126 all air cooled   If you ..
£21.54
Ex Tax:£17.95
Model: Classic Fiat 500 F/L/R & 126 all air cooled models Stock: In Stock
This is a Metal Lid to fit over the top of the Air Filter Housing to blank it offYou would use this if you fitted an alternative Carb or had a K &..
£17.94
Ex Tax:£14.95
Model: Classic Fiat 500, 126 all air cooled models Stock: In Stock
This Metal Cover fits to the front of the Fan Cowing and houses the Alternator This item is used to upgrade the Generator from a Dynamo on a stan..
£59.94
Ex Tax:£49.95
Model: most models Stock: In Stock
Branded Quality Parts   to fit: Classic Fiat 500 N/D/F/L/R 499cc/594cc& 650cc all models (up to 1974) Fiat 126 594cc & 650cc ..
£9.54
Ex Tax:£7.95
Model: Classic Fiat 500 & 126 Air Cooled all models Stock: In Stock
This is a Pair (2) of Aluminium Plugs that would need to be welded into the Crankcase Diameter: Large 41.5mm Small  24.5mm   to..
£6.60
Ex Tax:£5.50
Model: With Panda 30 Conversion Stock: In Stock
This is a set of FIVE Aluminium Spring Loaded Push Rod TubesSupplied with new Rubber SealsLength 4x 95mm, 1x 100mmto fit:Classic Fiat 500 (with Panda ..
£113.94
Ex Tax:£94.95
Model: Classic Fiat 500 N/D/F/L/R all models & 126 air cooled Stock: In Stock
Made in  ItalyThis is a Kit of 5 Aluminium Push Rod Tubes with Springs to keep them nice and tightto fit:Classic Fiat 500 all modelsFiat 126 all ..
£82.80
Ex Tax:£69.00
Model: Classic Fiat 500,126 (with 650cc Engine) Stock: In Stock
Brand NewGenuine Boxed PartThis is a New Cylinder Head without any valves, springs etc so just bare headto fit:Classic Fiat 500 (with 650cc Engine fit..
£287.94
Ex Tax:£239.95
Model: Fiat 126 BIS all models Stock: In Stock
Genuine Fiat Boxed Part Brand New Cylinder Head   This is a bare Cylinder Head and is not supplied with any Valves,Springs,Gaskets etc these w..
£203.94
Ex Tax:£169.95
Model: classic Fiat 500 & 126 all models Stock: In Stock
Fiat Part No: 4161986 (see diagram)   to fit: Classic Fiat 500 all models (up to 1974) Fiat 126 all air cooled models (up to 1999)   I..
£23.94
Ex Tax:£19.95
Model: Classic Fiat 500 & 126 all models with 650cc Engine Stock: Out Of Stock
This is the Pipe & Hose Assembly that connects from the Carburetor to the top of the Air Filter Housing Consists of 1x  Metal Center Pipe ..
£19.14
Ex Tax:£15.95
Model: Classic Fiat 500, 126 all air cooled models Stock: In Stock
This Stud is used to mount the Carb onto the Cylinder Head   Fiat Part No: 9908551 Dimms: M6 x 56mm   to fit: Classic Fiat..
£2.34
Ex Tax:£1.95
Model: Classic Fiat 500R (594cc), 126 all models Stock: In Stock
Complete kit of 8 Inlet and Exhaust Valve Springs Fiat Part No: 4301739+4301740 to fit: Classic Fiat 500R (594cc) all models Fiat ..
£26.34
Ex Tax:£21.95
Model: Classic Fiat 500 N,D & F all models (up to 1968) Stock: In Stock
Oil Pump Complete with Housing, Spring, Valve & Gearsto fit:Classic Fiat 500 N,D & F  all models (479cc & 499cc)   FROM 1957 up ..
£95.94
Ex Tax:£79.95
Model: Classic Fiat 500R & 126 all models Stock: In Stock
This is a brand new Oil Pump Gear kit with casing complete   to fit: Classic Fiat 500R 594cc & 650cc all models Fiat 126 594cc &a..
£59.94
Ex Tax:£49.95
Showing 1 to 16 of 128 (8 Pages)