Mechanical & Engine Parts

This is a brand new Oil Pump Gear kit with casing completeto fit:Classic Fiat 500R 594cc & 650cc all modelsFiat 126 594cc & 650cc all modelsIf you have any questions please feel free to ask..

This Bush is installed into the Con Rod Small Endto fit:Classic Fiat 500 all modelsFiat 126 all modelsIf you have any questions please contact us for help..

Brass Repair BushThis Bush is used to repair the hole in the Engine Crankcase where the Camshaft rotates and can be prone to wearto fit:Classic Fiat 500 F,L,R all modelsFiat 126 594cc & 652cc all modelsIf you have any questions please contact us for help..

This Aluminium Plug screws into the Crankcase near the dipstickThere is ONE of these Plug per CrankcaseSize M12 x 1.50to fit:Classic Fiat 500 all modelsFiat 126 all air cooled modelsIf you have any questions please contact us for help..

Made in Italyto fit:Classic Fiat 500 all modelsFiat 126 all modelsIf you have any questions please contact us for help..

These metal plugs are inserted into the CrankshaftSupplied as a THREE piece kit of Metal Plugsto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all modelsIf you have any questions please contact us..

Crankshaft Nut Locking Ring for Pulley endto fit:Classic Fiat 500 all modelsFiat 126 all modelsIf you have any questions please contact us for help..

This is to locate the front end of the crankshaft into the pulleyto fit:Classic Fiat 500 all modelsFiat 126 all models..

Set of 8 Cylinder Head Studs complete with Washers & Domed Nutsto fit:Classic Fiat 500 N/D/F/L all modelsIf you have any questions please contact us for help..

Set of 8 Cylinder Head Studs complete with Washers & Domed Nutsto fit:Classic Fiat 500R 594cc all modelsFiat 126 all air cooled modelsIf you have any questions please contact us for help..

Dipstick with Rubber Seal to check the Oil Level in the EngineThese are prone to blowing out due to worn seal and excessive oil pressureTo fit:Classic Fiat 500 all models (up to 1972)..

Dipstick with Rubber Seal to check the Oil Level in the EngineTo fit:Classic Fiat 500 wit 594cc & 650cc engineFiat 126, 594cc & 650cc engine..

Genuine Fiat PartFiat Part No: 7554968to fit:Fiat 126 BIS all modelsIf you have any questions please contact us for help..

OE QualityMade in ItalyRubber Seal to fit onto DipstickDimmensions:Length 47mmFits many different models including:Classic Fiat 500 R 594cc126 all models600,850,900,133,124,125,127,128,131,132Strada/Ritmo, RegataPanda, Uno all modelsCinquece..

This is an Aluminium Cap & Rubber Seal designed to block the distributor hole if you are installingan engine management kit or not using the distributor for any reason.to fit:Classic Fiat 500 all modelsFiat 126 all models..

Fitted between the Rocker Cover and the Air Filter Housing this rubber hose is very important tolet the engine breatheto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all air cooled models (up to 1999)If you have queries or questions please feel free to..

This Bracket is fitted at the front and back of the engine as standard This is for ONE Bracketto fit:Classic Fiat 500 all modelsFiat 126 all modelsIf you have any questions please contact us for help..

Brand NewMade in ItalyThis would screw into the alloy sump as long as you have the provision for itto fit:Classic Fiat 500 all modelsFiat 126 all air cooled modelsFiat 600 all modelsIf you have any questions please contact us..

Original Type Rocker Cover in BlackSupplied witha new Oil Capto fit:Classic Fiat 500 all models D/F/L/RFiat 126 600cc,650cc all air cooled models ..

Original QualityOVERSIZED 30mmSingle GrooveLength: 115.500 mm Material: Chrome-nickel-magnesium-steel Valve Head Diameter: 30.000 mm Valve Seat Angle: 45 ° Valve stem diameter: 8.000 mmto fit:Classic Fiat 500 D/F/L/R & Giardiniera (1966 to 1974)Fiat 126..