Menu
Your Cart

Screws, Studs, Bolts & Nuts

screw,stud,bolt,nut,brass,

Model: Classic Fiat 500N,D,F,L,R & 126 all air cooled models Stock: In Stock
When you change over to an Alloy Rocker Cover on a Classic Fiat 500 or 126 the Studs are usually too short to reach, as the Alloy Covers are higherThi..
£11.94
Ex Tax:£9.95
Model: classic Fiat 500 various, early 126 (up to 1978) Stock: In Stock
This Wheel Bolt has a Tapered Head with Chrome Finish to fit various wheels Dimms:  Bolt Diameter M10mm x 1.5 (35mm),  Total Length 50..
£2.39
Ex Tax:£1.99
Model: classic Fiat 500 various, early 126 (up to 1978) Stock: In Stock
This Wheel Bolt has a Flat Head with Domed Chrome Finsh to fit various wheels Dimms:  Bolt Diameter M10mm x 40mm,  Total Length 60mm to fi..
£2.39
Ex Tax:£1.99
Model: Classic Fiat 500, 126 all air cooled models Stock: In Stock
This Stud is used to mount the Carb onto the Cylinder Head   Fiat Part No: 9908551 Dimms: M6 x 56mm   to fit: Classic Fiat..
£2.34
Ex Tax:£1.95
Model: all models Stock: In Stock
This Chrome Bolt has a large Domed Head to fit flush with the Bumper and comes with a new Washer and Nut   (If your Classic Fiat 500 has Ch..
£3.54
Ex Tax:£2.95
Model: All models Stock: In Stock
Clutch Cable Securing Stud & Nuts   to fit: Classic Fiat 500 all models Fiat 126 all models   If you have any questions please con..
£3.54
Ex Tax:£2.95
Model: Classic Fiat 500N/D/F/L all models Stock: In Stock
Set of 8 Cylinder Head Studs complete with Washers & Domed Nuts   to fit: Classic Fiat 500 N/D/F/L all models   If you have any..
£57.54
Ex Tax:£47.95
Model: Classic Fiat 500, 126 all models (EXC BIS) Stock: In Stock
Set of 8 Cylinder Head Studs complete with Washers & Domed Nuts    to fit: Classic Fiat 500R 594cc all models Fiat 126 all air coole..
£65.94
Ex Tax:£54.95
Model: Classic Fiat 500,126 & 600 all models Stock: In Stock
This Stainless Steel Bolt screws into the sides of the Distributor body to attach the metal spring clips to hold the Distribtor Cap in place Supplied..
£3.54
Ex Tax:£2.95
Model: Classic Fiat 500,126 & 600 all models Stock: In Stock
These Stainless Steel Bolts screw into the sides of the Distributor body and attach the metal spring clips to hold the Distribtor Cap in place Suppli..
£9.54
Ex Tax:£7.95
Model: 24mm Drive Shaft (F/L & R models, 126, 600) Stock: In Stock
Drive Shaft Clip (for 24mm Drive Shaft)     to fit: Classic Fiat 500 F/L & R all models  (from 1966 to 1974) Fiat 126 all mod..
£1.14
Ex Tax:£0.95
Model: 19mm Drive Shaft (D/F models) Stock: In Stock
Drive Shaft Clip (for 19mm Drive Shaft)     to fit: Classic Fiat 500 D/F all models  (from 1966 to 1970)   If..
£0.90
Ex Tax:£0.75
Model: all models Stock: In Stock
Set of FOUR Bolts & Spring Washers to fit the drive shaft coupling and flange   Fiat Part No: 16044121   to fit:   Classic Fi..
£4.74
Ex Tax:£3.95
Model: all models Stock: In Stock
This Brass Nut is used to attach the Exhaust to the Manifold   (8mm x 1.25 x 8)   to fit: Classic Fiat 500 all models Fiat 126 all mode..
£1.14
Ex Tax:£0.95
Model: all models Stock: In Stock
This Stud is used to attach the Exhaust to the Manifold/Engine   (8mm x 1.25 x 42)   to fit: Classic Fiat 500 all models Fiat..
£1.14
Ex Tax:£0.95
Model: Classic Fiat 500, 126 all air cooled models Stock: In Stock
This is a set of 6 Bolts & Washers to attach the Aluminium Crank Pulley Cover that houses the Oil Pump & Filter   Fiat Part No: 1382362..
£3.54
Ex Tax:£2.95
Showing 1 to 16 of 40 (3 Pages)