Screws, Studs, Bolts & Nuts

This Lock Washer fits behind the Front Hub Nut that screws onto the Stub Axle to fit:Fiat 126 all models (up to 1999) If you have any questions or queries please contact our office for help..

This is for TWO Nyloc Nut & Washer to secure the front leaf springHigh Tensile Zincto fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600 all modelsFiat 850 all modelsAutobianchi Bianchina..

This is a hardened bolt and locking washer for the front main bearingto fit:Classic Fiat 500 all modelsFiat 126 all models..

Set of SIX Bolts and Spring Washers to attach the Front Main Crank Bearing to fit:Classic Fiat 500 N/D/F/L/R & Giardiniera all modelsFiat 126 all models If you have any questions please contact us for help..

This Stud is used to attach the Fuel Pump to the EngineTWO required in total for one engine  (8mm x 1.25 x 54) to fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600 all modelsFiat 850 all modelsFiat 900T/E If you have any quest..

This Adjuster Screw attaches to the back of the Head Lamp and is supplied with the White plastic Clipsto fit:Fiat 126 all modelsFiat 127 Early ModelsFiat 128 Early ModelsFiat 900T/E  all modelsIf you have any questions please contact us for help..

This Brass Nut is used to attach the Exhaust to the Manifold(8mm x 1.25 x 16)to fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600 all modelsFiat 850 all modelsFiat 900T/EIf you have any questions or queries please contact our office for help..

This is the left hand side Front Hub Nut that screws onto the Stub AxleM14 x 1.5mmto fit:Classic Fiat 500 all models  (up to 1974)Fiat 126 all models (up to 1999)Fiat 600Fiat 850If you have any questions or queries please contact our office for h..

This is the right hand side Front Hub Nut that screws onto the Stub AxleM14x1.5mmto fit:Classic Fiat 500 all models  (up to 1974)Fiat 126 all models (up to 1999)Fiat 600Fiat 850If you have any questions or queries please contact our office for help..

Rear Hub Flange (4 bolt type)(for 22mm Drive Shaft)to fit:Classic Fiat 500 F/L & R all models  (from 1966 to 1974)Fiat 126 all modelsFiat 600If you have any questions or queries please contact our office for help..

Rear Engine Mount BoltThis Bolts fits through the middle of the Spring and holds it all togetherTotal Length 95mmto fit:Classic Fiat 500F/L/R (with 126 594cc or 650cc Engine fitted)Fiat 126 (594cc, 650cc & 704cc) all modelsIf you have any questions please con..

Rear Hub Flange (4 bolt type) Fiat Part No: 4144477 to fit:Fiat 850 all modelsFiat 850T & 900 T/E If you have any questions or queries please contact our office for help..

Rear Hub Nutto fit:Classic Fiat 500 all models  (up to 1974)Fiat 126 all models (up to 1999)Fiat 600Fiat 850If you have any questions or queries please contact our office for help..

Set of SIX Bolts and Spring Washers to attach the Rear Main Crank Bearing to fit:Classic Fiat 500 N/D/F/L/R & Giardiniera all modelsFiat 126 all models If you have any questions please contact us for help..

High Tensile Steel Bolt for the Rear Suspension Arm/A-Framecomplete with a new Washers & NutYou would require FOUR per vehicleto fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600If you have any questions please contact us..

Set of three bolts and washers to fit the A-Frame Bracket (RIC-1982/RIC-1981) to the floor of the car.You would require two kits per vehicle.Kit Includes:3x Bolt3x Spring Washer3x Flat Washer(All underlined in the diagram)to fit:Classic Fiat 500 all mode..

This Stud screws into the Cylinder Head and attaches the Valve Cover with a Nut Fiat Part No:  987176Dimms: M8 x 98mm to fit:Classic Fiat 500 all modelsFiat 126 all models If you have any questions please contact us for help ..

This is a set of 16 Wheel Bolts M12 x 1.5mmto fit Fiat 126 Hub with 98PCDLength of Thread 23.5mmLength of Head 24.5mmSupplied with ONE Multi-spline Tool to help installto fit:Classic Fiat 500 (with 98PCD HUB)Fiat 126 all models  (with 98PCD HUB)If you have any questions please contact us for he..

Set of 8 Cylinder Head Studs without Washers & Domed NutsHave been fitted once then removed so the thread is clearly usedto fit:Classic Fiat 500 N/D/F/L all modelsIf you have any questions please contact us for help..

This Stainless Steel Bolt has a large Domed Head to fit flush with the Stainless Steel Bumpers we also sell and comes with a new Washer and NutLength : 120MMThread : M8to fit:Classic Fiat 500 all modelsFiat 126Fiat 600Plus many othersIf you have any q..