Gearbox Mount/Mounting - Classic Fiat 500 & 126
Gearbox Mount/Mounting - Classic Fiat 500 & 126
£3.95
- Stock: In Stock
- Model: Classic Fiat 500 N/D/F/L/R 499cc, 594cc & 126, 650cc
- Weight: 0.20kg
Related products
Model: 4111917
Connects the Gear Linkage assembly to the Gearbox in order to select Gears
This part has a rubber joint in the middle that after a while ..
£3.95
Manufacturer: Birth
Common fault on these cars causing vibration and knocking
O/S Right Hand Mounting
Fiat Part no: 7578960
to fit:
Fia..
£28.95
Manufacturer: Fiat Genuine
Brand New
Quality Original Parts
Fiat part no: 7721501 (no 6 in the diagram)
To Fit:
Classic Fiat 500 all models (with 126 s..
£24.95
Manufacturer: Birth
Model: 7578961
Common fault on these cars causing vibration and knocking
N/S Left Hand Mounting
to fit:
Fiat 126 Bis all models
..
£39.95
This Bush is one of Four that fit into the Rear Engine Mount
Dimmensions:
Length 29mm
Outer Diameter 21mm
Inner Diameter 12mm
Diame..
£1.25
Manufacturer: Pirelli
Model: 4354392
This Boot fits on the inside of the Drive Shaft where it connects to the Gearbox
It has an internal Oil Seal to stop the oil leaking and a Metal Bu..
£6.95
Model: 4108019
This Boot fits on the inside of the Drive Shaft where it connects to the Gearbox
It has an internal Oil Seal to stop the oil leaking and a Plas..
£5.95
Model: 891605,639163,7545340
If there is a whining noise coming from the gearbox then the chances are its the Diff Bearings making the noise
Common fault on these models
&nb..
£14.95
A common problem with these gearboxes is that the gears get scored and eventually start to disintegrate
As there is no syncro on these boxes they a..
£169.95
A common problem with these gearboxes is that the gears get scored and eventually start to disintegrate
As there is no syncro on these boxes they ar..
£159.95
Manufacturer: Valeo
Original Quality
Made by VALEO
Three Piece Clutch, Plate, Disc & Thrust BearingClutch Disc Diameter is 160mm
to fit:..
£99.95
This Bracket site underneath the Gearbox and supports it from too much movement
Made in Steel with a neat black finish
to fit:
..
£14.95
This Bracket site underneath the Gearbox and supports it from too much movement
Made in Steel with a neat black finish
to fi..
£15.95
This Rubber Bush has three metal rings on the inside and it fits into
the hole underneath the car were the Gear Linkage runs through (picture shown)..
£4.95
This kit comes with a new Spring and all the Rubber Mounting dampers
to fit:
Classic Fiat 500 R (594cc)
Fiat 126 (594cc &..
£14.95
This Spring fits at the rear of the engine to absorb the vibration
to fit:
Classic Fiat 500 D/F/L all models
If you have an..
£9.95
Manufacturer: Spesso
This metal Uprated Gasket fits between the Exhaust and the Manifold/Elbow
You would normally change them as a pair
to fit:
Classic Fiat 50..
£4.75
Brand New
This is a FOUR piece kit containing the front and rear Bearings for both inner gearbox shafts
We have the TWO Differen..
£49.95
Manufacturer: Fiat Genuine
Due to wear and tear or lack of oil this part can become noisy after a time
Ratio: 8/39
Fiat Part Number: 46575360
&nb..
£99.95