Menu
Your Cart

VEMA

Model: Classic Fiat Panda & Uno FIRE Engine Carb models Stock: In Stock
Brand NewMade in ItalyThis is for ONE Clip that fits onto the side of the Air Filter Housing to secure itto fit:Classic Fiat Panda 750cc,999cc,1108cc ..
£4.16
Model: Fiat Coupe all late models Stock: Out Of Stock
Brand NewMade in ItalyThis is for ONE StrutDimmensionsLength 673mm to fit:Fiat Coupe all late models (1993 to 1999) ..
£73.63
Model: Fiat Coupe all early models Stock: In Stock
Brand NewMade in ItalyONE Bonnet Gas StrutDimensions:Length 670mm to fit:Fiat Coupe all early models (1993 to 1999) ..
£42.05
Model: Fiat 126 all models Stock: In Stock
This is a Brand New Kit of TWO Stub Axles for the Left & RightThey have new top Bushes, Pins, Washers and Bushes and are ready to in..
£311.53
Model: Classic Fiat 500 F/L/R all models (except Giardiniera) Stock: In Stock
This is a Brand New Kit of TWO Stub Axles for the Left & RightThey have new top Bushes, Pins, Washers and Bushes and are ready to in..
£249.95
Model: Classic Fiat 500 D/F/L/R/G & Autobianchi Bianchina Stock: In Stock
Brand NewMade in ItalyLength [mm]426 mmWeight [g]1250 gFitting PositionRear Axle left and rightFront Axle left and rightDiame..
£29.95
Model: Fiat 126 all models Stock: In Stock
Brand NewMade in ItalyLength [mm]442 mmWeight [g]1310 gFitting PositionRear Axle left and rightFront Axle left and rightDiame..
£29.95
Model: Fiat 600 & Multipla all late models (D) Stock: In Stock
Brand New Length [mm]426 mmWeight [g]1200 gFitting PositionFront Axle left and rightDiameter 1 [mm]16&..
£29.95
Model: Fiat 126 all models Stock: In Stock
Brand NewThis is a new improved high quality Drive Shaft KitLargest Diameter available 24/25mm (this measurement can vary between 22mm and 2..
£79.95
Model: Classic 500 R & 126 594cc/650cc Stock: In Stock
This kit consist's of one Top and one Bottom Bracket to make a matching pair (there are two pairs fitted to an exhaust) to fit:cla..
£10.47
Model: Fiat Panda & Uno FIRE (up to 1992) Stock: In Stock
Exhaust Down Pipe Bracket Kit consists of a top and bottom Bracket with a new Nut & Bolt  Common failure on the Fire Engines mod..
£15.74
Model: various models Stock: In Stock
Brand NewMade in ItalyThis Exhaust Manifold attaches to the engine at one end and the exhaust down pipe at the otherCommon fault on these engines ..
£69.95 £79.95
Model: Fiat 124 Sports,Spider 1.4,1.6 & 1.8 (up to 1976) Stock: In Stock
Brand NewMade in ItalyHeight [mm]12 mmDiameter 1 [mm]288 mmInner diameter [mm]263 mmNumber of Teeth1..
£52.58
Model: New Fiat Panda 1.1,1.2 & 1.3MJTD Stock: In Stock
This is the front Tie Bar or Drop Link Fiat Part No:  51856872, 50703296 (no 4 in the diagram) to fit: New Fiat Panda ..
£15.74
Model: Fiat Multipla 1.6 16v, 1.9 JTD & Marea all models Stock: In Stock
This is the front Tie Bar or Drop LinkFiat Part No:  51701045,46413122,60813377to fit:Fiat Multipla 1.6 16V & ..
£15.74
Model: Classic Panda all models (from 1980 to 2002) Stock: In Stock
This is a Front Wheel Hub & Bearing Complete (no 7 in the diagram)to fit:Classic Fiat Panda all models inc 4x4..
£39.95
Model: Classic Panda 4x4 all models Stock: In Stock
Made in ItalyThis is a Front Wheel Hub & Bearing Complete (no 1 in the diagram) to fit:Classic Fiat Panda 4x4 all mo..
£69.95
Model: Fiat Many Models Stock: In Stock
Common fault on many models as the Wheel Bolts get cross threaded(NOT supplied with Bearing which is sold separately)Fiat Part No: 760813..
£23.11
Model: Fiat 124 all models Stock: In Stock
Made in ItalyThis is for ONE Bracketto fit:124 (124_) 1200 (124A) More information 09.1967 - 07.1975739048651197Saloon124 (124_) 1200 (TA)&n..
£4.95
Model: Fiat 127, 128 & A112 all models Stock: In Stock
Made in ItalyThis is for ONE Bracketto fit:Fiat 128127 (127_) 0.9 More information 06.1971 - 05.198325432940903Hatchback127 (127_) 0.9 (127A..
£4.95
Model: Fiat 124 all models Stock: In Stock
Made in ItalyThis kit consists of1x  Link Bar2x Bush2x Washer Jet2x Nutto fit:124 (124_) 1200 (124A) More information 09.1967 - 07.1975..
£21.95
Model: Fiat 124 all models Stock: In Stock
Made in ItalyThis kit consists of1x  Link Barto fit:124 (124_) 1200 (124A) More information 09.1967 - 07.1975739048651197Saloon124 (124..
£16.95
Model: Fiat 124 all models Stock: In Stock
Made in ItalyThis is for ONE Bracketto fit:124 (124_) 1200 (124A) More information 09.1967 - 07.1975739048651197Saloon124 (124_) 1200 (TA)&n..
£4.95
Model: Fiat 127,128, A112 all models Stock: In Stock
Made in ItalyDimmensions Inside Diameter 64mmOutside Diameter 80mmHeight 61mmto fit:Fiat 127Fiat 128Lancia A112..
£7.95
Model: Classic Fiat Panda 4x4 all models Stock: In Stock
This is the front suspension bracket complete with ball joint Fiat Part No: 5976943 (no 1 in diagram) to fit:Classic Fia..
£23.11
Model: Fiat 124 all models Stock: In Stock
Made in ItalyThis consists of 1x Boltto fit:124 (124_) 1200 (124A) More information 09.1967 - 07.1975739048651197Saloon124 (124_) 1200 ..
£9.95
Model: Fiat 124 all models Stock: In Stock
Made in ItalyThis consists of 2x Bush1x Bolt 2x Washers1x Nutto fit:124 (124_) 1200 (124A) More information 09.1967 - 07.197573904..
£16.95
Model: Classic Fiat 500 R & Giardiniera, 126 all models Stock: In Stock
Brand Newmade in ItalyThis is a complete assembly consisting of 1x  Triangle Wishbone & Bushes1x Supporting Bracketall FittingsAll ready..
£36.79
Model: Classic Fiat 500 N/D/F/L 499cc all models Stock: In Stock
This Hardened metal push rod operates the Fuel Pump by the rotation of the engine  Length 178mm to fit:Classic Fiat 500..
£5.21
Model: Classic Fiat 500 R 594cc & 650cc all models Stock: In Stock
This Hardened metal push rod operates the Fuel Pump by the rotation of the engine to fit:Classic Fiat 500 R 594cc (up to 1973)..
£5.21
Showing 1 to 30 of 89 (3 Pages)