Axles, Shafts, Joints and Couplings

These high pressure grease guns have an improved plunger for complete grease removal for both cartridge and bulk grease loadingKey FeaturesHeavy duty manual grease gun 3-way filling operation, standard 400g cartridge, suction or bulk fill up to 500cc Standard 400g cartridge (included)..

Brand NewMade in ItalyDiameter 850mmto fit:Fiat 850 Saloon, Coupe & SpiderFiat 900 T/E all modelsIf you have any questions please contact us for help..

OE QualityMade in ItalyOuter diameter [mm]57,15 mmHeight [mm]10 mmFitting PositionFront AxleInner diameter [mm]35 mmto fit:Fiat 600 MultiplaFiat 600TFiat 850TFiat 900T/E all models..

Connects the Gear Linkage assembly to the Gearbox in order to select GearsThis part has a rubber joint in the middle that after a while will perish and make itdifficult to select gearsto fit:Fiat 850 all modelsFiat 850T & 900T/EFiat 127 all modelsFiat 128 all mo..

Brand NewMade in ItalyThis is for ONE 4 piece kit includes a special locating stepped washer,bolt, spring washer and lock nut as per the phototo fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 850Fiat 127If you have any questions please contact u..

A professional grease for the professional user, a high quality product manufactured in the UKKey FeaturesA heavy duty premium quality highly versatile multi-purpose lithium grease Operating temperature range -20 C to + 140 C High degree of corrosion protection Excellent extreme pre..

To Fit a multtude of Fiat, Alfa Romeo & Lancia models old and newFiat Part No: ..

Front Wheel Hub Nut(M18 x 1.5) For O/S Right of Vehicle (Left Hand Thread) Fiat Part No: 14044871to fit:Fiat DinoFiat 124 & 125Fiat 131 & 132Fiat 1100R, 1200, 1300 & 1500 CabFiat 600T, 850T & 900T/E If you have any questions please c..

Front Wheel Hub Nut(M18 x 1.5) For O/S Right of Vehicle (Left Hand Thread) Fiat Part No: 14044171to fit:Fiat DinoFiat 124 & 125Fiat 131 & 132Fiat 1100R, 1200, 1300 & 1500 CabFiat 600T, 850T & 900T/E If you h..

Brand NewFine Multipline Shaftto fit:Fiat 850 all models..

Rear Hub Flange (4 bolt type) Fiat Part No: 4144477 to fit:Fiat 850 all modelsFiat 850T & 900 T/E If you have any questions or queries please contact our office for help..

These Front Stub Axles are fully factory reconditioned in ItalySupplied as a kit for both sidesThe Kit also comes with two new Hub Nuts(Once fitted they must be greased fully using a grease gun until the grease goes all the way through, then this procedure should be repeated ..

The benefit of these tie straps over plastic ones is that they are made from non corrosive stainless steel They are mainly designed to be fitted to CV Boots which are under constant threat from water, heat and road grime..

This is a complete kit of Trunnions to repair/overhaul the front Stub AxlesStandard Sizeto fit:Fiat 850T & 900T/EFiat MultiplaFiat 1100If you have any questions please feel free to ask..

This is a complete kit of Trunnions to repair/overhaul the front Stub Axles(+5) OverSizeto fit:Fiat 850T & 900T/EFiat 600 MultiplaFiat 1100If you have any questions please feel free to ask..

This is a complete kit of Trunnions to repair/overhaul the front Stub Axles(+10) OverSizeto fit:Fiat 850T & 900T/EFiat 600 MultiplaFiat 1100If you have any questions please feel free to ask..