Fiat Multipla Ignition & Electrical Items

This is a Ballast Resistor to fit in the electrical circuit of the car if the Distributor is getting too hot1.6ohmCan be fit to any application and wiring is recommended by a qualified auto electrician..

Battery Isolator Switch100 AMPThis Switch can be fitted anywhere inside or outside of the car and is used to disconnect the Battery andavoid it from being drained for any reasonEspecially useful for classic cars if they are not driven very oftenIf you have any qu..

This is a roll of plastic cable binding to protect and keep your wring harness loom tidy and protectedWe offer various sizes so please choose your desired size12mm x 7 metre roll16mm x 4 metre roll25mm x 2.3 metre rollCan be used on any Fiat,Lancia, Alfa Romeo & many other c..

OE Quality PartsMade in Italyto fit:Fiat Punto MK1 1.2 8V & 16V, 1.4 GT, 1.6, 1.7D (from 1993 to 99)Fiat Classic Panda 1.1 & 4x4 (from 1995 to 03)Fiat Seicento 0.9 & 1.1 (1998 to 10)Fiat Barchetta all (1995 to 05)Fiat Coupe 1.8 16V, 2.0 20V & Turbo (1996 to 00)..

This is an Ignition Switch engine start buttonMade in Plastic ChromeThree 12V Connections..

Suitable for use in wet cell batteries and to prevent irons rusting and also for streak free Windscreen WashersKey FeaturesSuitable for use in wet cell batteries and to prevent irons rustingEssential for battery care/maintenance1 Litre bottle..

Brand New Old Stock Original Partto fit:Fiat 600 Series 1 633cc (up to 1959) all modelsFiat 600 Multipla early models(with Magnetti Marelli Distributor)If you have any queries or questions please feel free to ask..

Brand New Old StockGenuine Boxed Magneti Marellito fit:Fiat 600D  767cc Models (with Magnetti Marelli Distributor)Fiat 600 Multipla 767cc Models (with Magnetti Marelli Distributor)If you have any queries or questions please feel free to ask..

This Stainless Steel Bolt screws into the sides of the Distributor body to attach the metal spring clips to hold the Distribtor Cap in placeSupplied as ONE BoltFiat Part No:  9910387to fit:Classic Fiat 500 all modelsFiat 126 all models (exc BIS)Fiat 600 all models ..

These Stainless Steel Bolts screw into the sides of the Distributor body and attach the metal spring clips to hold the Distribtor Cap in placeSupplied as a kit of TWO Stainless Steel Boltsto fit:Classic Fiat 500 all modelsFiat 126 all models (exc BIS)Fiat 600 all models..

Fully Reconditioned Original DistributorSupplied with all parts including,1x  Distributor Cap1x Points1x  Rotor Arm1x  Condenser2x  Clipsto fit:Fiat 600D & Multipla all modelsIf you have any questions please contact us for helpTHERE IS..

Genuine Old Stockmade by Magneti MarelliAluminium Distributor MountFiat Part No: 4011971to fit:Fiat 600 series 1..

This is a rubber o’ring to fit at the top of the shaftto fit:Classic Fiat 500 all modelsFiat 600 all models..

This is the Dry Type standard Coil (NOT Oil Filled Type)This is an alternative and direct replacement to the standard Coil and works better in a hot engine bayResistance 1.75 ohm15 = POSITIVE1= NEGATIVEFits many different models including:Fiat 500 all models ..

Non Adjustable Electronic Type Voltage RegulatorThis part fits to the rear Bulkhead of vehicle and connects to the DynamoFitted to an Aluminium plate for coolingto fit:Classic Fiat 500 all models (with Dynamo)Fiat 126 all early models up to 1978 (with Dynamo)Fi..

Ceramic Type European Fuse (looks like a grain of Rice)to fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600Fiat 850PLUS MANY OTHER APPLICATIONSIf you have any questions please contact us for help..

Key Features005-008 Metric Sizes: 005, 010, 015, 020, 030, 040, 050, 060, 070, 080mm Metric sizes Fold away sleeve..

Original Magnetti Marelli PartResistance Rated OHMS 3.0Fits many different models including,Classic Fiat 500 all modelsAutobianchi Bianchina all modelsClassic Fiat PandaFiat UnoFiat Strada/RitmoFiat 124 & 125Fiat 126,Fiat 127 & 128,Fiat 131 & 13..

Genuine Original SIPEA part with Fiat keysThis Ignition Switch is located in the middle of the dashboard underneath the ashtraySwitch with Two Fiat Style KeysFOUR BULLET PIN Connectionsto fit:Fiat 600 all modelsFiat 850 all models (NOT 850T & 900T/E)Fiat 11..

This Sticker would attach to the original CoilDimmensions70mm x 25mm..