Repair Panels

This is a kit of two new hinge pins and two bushes to tighten the hinges and stop them from dropping One Kit is for ONE Door to fit:Classic Fiat 500 F/L/R all models (from 1966 to1974)(NOT for Suicide Door Models) If you have any questi..

This is a kit of 8 Pieces to repair the Floor Pan Strengthening Barsto fit:Classic Fiat 500 all modelsIf you have any questions please contact us for help..

Made in ItalyThis is a metal panel that you can use to repair the front panel if your head lamp housing is corrodedto fit:Classic Fiat 500 F/L/R all models..

This is a metal plate with welded studs to repair the Studs that hold the front wishbone linkThe distance between the two bolts is 90mmto fit:Classic Fiat 500 N/D/F/L all modelsIf you have any questions please contact us for help..

This is a metal plate with welded studs to repair the Studs that hold the front wishbone linkThe distance between the two bolts center to center is 105mmto fit:Classic Fiat 500R all modelsFiat 126 all modelsIf you have any questions please contact us for help..

This is a triangular reinforcement panel thats fitted at either end of the dashboard (see diagram)to fit:Classic Fiat 500 N,D,G all models (up to 1966)..

Made in ItalyThis is the adjustable Seat Runner that is welded to the Floor Pan for the Seats to locate and slide insideto fit:Classic Fiat 500 all modelsFiat 126 all modelsIf you have any questions please contact us for help..

Brand NewThis bracket is located in the top left hand inside the engine bayto fit:Classic Fiat 500 N,D all Models..

Brand New Made in ItalyThis Door is for the OTTOBULLONE first edition Fiat 500F from 1966 with 4 Bolts per Door HingeTo replace the panel where the door is hinged, the Hinges are a separate part and sold separatelyto fit:Classic Fiat 500 F 1st Series (from 1966)If you have any questions pl..

Brand New Made in ItalyTo replace the panel where the door is hinged, the Hinges are a separate part and sold separatelyto fit:Classic Fiat 500 F/L/R all modelsIf you have any questions please contact us for help..

Brand NewMade in Italyto fit:Classic Fiat 500 F/L/R all modelsIf you have any questions please email us for help..

Made in ItalyLEFT HAND SIDEThis is the rear part of the front wheelhouse where it meets the floor panel inside the carto fit;Classic Fiat 500 all models..

Brand NewMade in ItalyIf you have a corroded or damaged leaf spring support then you can either change the whole X-Member or repair it using this panelto fit:Classic Fiat 500 N/D/F/L/G all models..

Brand NewMade in ItalyThis Bracket is welded to the Inner Front Arch and supports the suspensionto fit:Classic Fiat 500 all modelsIf you have any questions please contact us for help..

Made in ItalyThis panel is made to repair the front arch of the front wingto fit:Classic Fiat 500 all modelsIf you have any questions please contact us for help..

Made in ItalyThis Panel is a repair section for the Front Wing where it meets the Sill Panel behind the front wheelto fit:Classic Fiat 500 all modelsIf you have any questions please contact us for help..

Brand NewThis is the reinforcement panel that sits behind the front wing where it meets the a-postto fit:Classic Fiat 500 F/L/R all models..

This repair panel has been made to the shape of the bottom of the left hand door and will repair any rust bubbling on the outer skinto fit:Classic Fiat 500 all models (from 1965 to 1974)NOT SUICIDE DOOR MODELSIf you have any questions please feel free to ask..

Made in ItalyThis panel is located between the rear shock absorber mounts at the base of the rear bulkhead inside the carto fit:Classic Fiat 500 D/F/L/R..

Brand NewThis bracket is located in the top right hand inside the engine bayto fit:Classic Fiat 500 N,D all Models..