Axles, Shafts, Joints and Couplings

These high pressure grease guns have an improved plunger for complete grease removal for both cartridge and bulk grease loadingKey FeaturesHeavy duty manual grease gun 3-way filling operation, standard 400g cartridge, suction or bulk fill up to 500cc Standard 400g cartridge (included)..

Brand NewMade in ItalyLength [mm]442 mmWeight [g]1310 gFitting PositionRear Axle left and rightFront Axle left and rightDiameter 2 [mm]25 mmNumber of Teeth22to fit:Fiat 126 all models..

Drive Shaft Clip(for 24mm Drive Shaft)to fit:Classic Fiat 500 F/L & R all models (from 1966 to 1974)Fiat 126 all modelsFiat 600If you have any questions or queries please contact our office for help..

Brand NewOE QualityMade in ItalyAluminium with rubber damper inside, very common to breakDimmensions:Circumference 26cmDepth 4.5cmDiameter 8cmto fit:Classic Fiat 500 F/L/R/G (1966 to 1973)Fiat 126 all modelsFiat 600 all models..

OE QualityMade in ItalyAluminium with rubber damper inside, very common to breakSupplied with4x Bolts & Spring Washers RIC-9421x Rear Hub Nut-RIC-684Dimmensions:Circumference 26cmDepth 4.5cmDiameter 8cmto fit:Classic Fiat 500 F/L/R/G (..

Set of FOUR Bolts & Spring Washers to fit the drive shaft coupling and flangeFiat Part No: 16044121to fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600If you have any queries or questions please contact our office for help..

Brand NewThis is a new improved high quality Drive Shaft KitLargest Diameter available 24/25mm (this measurement can vary between 22mm and 25mm)This kit consists of,2x Drive Shafts(24/25mm diameter)2x Drive Shaft Flange2x Shaft End Springs2x Clips2x Inner Boots ..

These Metal Nuts are not threaded but lock onto the end of the Drive Shaft inside the Gearbox to lock in to placeThere are TWO Nuts per Drive ShaftSold as a PAIR (2)to fit:Classic Fiat 500 all models N/D/F/L/R/GFiat 126 all modelsIf you have any questions please con..

This small Spring is located at the wheel end of each drive shaft to keep the tension and stop any knocking(for later larger type 24mm Drive Shaft)to fit:Classic Fiat 500 F/L & R (up to 1974)Fiat 126 all modelsIf you have any queries or questions please contact our..

Front Grease Cap fits on the Front Hub and acts as a dust & dirt shieldto fit:Classic Fiat 500 all modelsFiat 126 early models (594cc)If you have any questions please contact us for help..

Front Grease Cap fits on the Front Hub and acts as a dust & dirt shieldto fit:Fiat 126 all models (650cc & 704cc)Fiat 600 all modelsFiat 850 all modelsFiat 124 all modelsFiat 127 all modelsFiat 128 all modelsIf you have any questions please contact us for h..

Fully ReconditionedFront Wheel Hub/Flange without bearings etcWheel Bearing Kits sold separatelySKF Brand RIC-385BUDGET Brand RIC-1956to fit:Fiat 126 all models (from 1979 on)If you have any questions please contact us for help..

Connects the Gear Linkage assembly to the Gearbox in order to select GearsThis part has a rubber joint in the middle that after a while will perish and make itdifficult to select gearsto fit:Classic Fiat 500 all modelsFiat 126 all models..

A professional grease for the professional user, a high quality product manufactured in the UKKey FeaturesA heavy duty premium quality highly versatile multi-purpose lithium grease Operating temperature range -20 C to + 140 C High degree of corrosion protection Excellent extreme pre..

To Fit a multtude of Fiat, Alfa Romeo & Lancia models old and newFiat Part No: ..

Made in PolandThis Kit consist's of all the parts to overhaul ONE of Front Stub Axles(we would always recommend changing the top Stub Bushes at the same time, available above in related items)Fits:Classic Fiat 500 all modelsFiat 126 all modelsIf you have any ques..

This Kit consist's of all the parts to overhaul a pair of Front Stub AxlesIncluding Brass Bushes(we would always recommend changing the top Stub Bushes at the same time, available above in related items)Fits:Classic Fiat 500 all modelsFiat 126 all modelsIf you have a..

This Kit consist's of all the parts to overhaul a pair of Front Stub Axles(Including Top Bush, Brass Bushes, Steel Washers and Bearings to allow the steering to be lighter)One Bearing is installed on the bottom of each stub axle only to take the loadFits:Classic Fiat 50..

Made in ItalyThis Boot fits on the outside of the Drive Shaft where it connects to the WheelIt is basically a rubber dust cover and fits onto the Drive Shaft and around the lip of the Flange Diameter:  19mm (smaller type shaft)(These are designed to be nice tight fit so they ma..

Made in ItalyThis Boot fits on the outside of the Drive Shaft where it connects to the WheelIt is basically a rubber dust cover and fits onto the Drive Shaft and around the lip of the FlangeDiameter:  22-24mm (larger type shaft)(These are designed to be nice tight fit so they ma..