%20[LIMITED%20to%20500px]-640x560w.jpg "Fiat 238,241,242")
Model: Classic Fiat 500N,D,F,L,R & 126 all air cooled models
When you change over to an Alloy Rocker Cover on a Classic Fiat 500 or 126 the Studs are usually too short to reach, as the Alloy Covers are higherThis kit consists of2x Longer Studs 115mm2x St Steel Nyloc Nut2x Fibre Washerto fit:Classic Fiat 500 N,D,F,L,R..
£11.94
Ex Tax:£9.95
Model: classic Fiat 500 various, early 126 (up to 1978)
This Wheel Bolt has a Tapered Head with Chrome Finish to fit various wheelsDimms: Bolt Diameter M10mm x 1.5 (35mm), Total Length 50mmto fit:Classic Fiat 500 all modelsFiat 126 all early models (up to 1978)If you have any questions please feel free to ask..
£3.54
Ex Tax:£2.95
Model: classic Fiat 500 various, early 126 (up to 1978)
This Wheel Bolt has a Flat Head with Domed Chrome Finsh to fit various wheelsDimms: Bolt Diameter M10mm x 40mm, Total Length 60mmto fit:Classic Fiat 500 all modelsFiat 126 all early models (up to 1978)If you have any questions please feel free to ask..
£3.54
Ex Tax:£2.95
Model: M6 & M8 Sizes
These bolts are most commonly used for door locks and catches but there are a multitude of applicationsfor all classic cars..
£0.90
Ex Tax:£0.75
Model: Classic Fiat 500,126, 600,850 all models
This is a high Tensile Bolt and Nut to fit through the Bottom of the Front Steering KnuckleM10 x 95mmto fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600Fiat 850If you have any questions please contact us for help..
£2.34
Ex Tax:£1.95
Model: Classic Fiat 500, 126, 600 all models
This Chrome Bolt has a large Domed Head to fit flush with the Bumper and comes with a new Washer and Nut(If your Classic Fiat 500 has Chrome Knudge Bars fitted front and rear then you need the extra long Chrome Bolts)to fit:Classic Fiat 500 N/D/F/L/R all modelsClassic ..
£4.20
Ex Tax:£3.50
Model: Fiat & Lancia most models
These bolts and washers are used to install the clutch plate onto the flywheelThis is a kit of6x Bolt high tensile6x Spring Washerto fit:Classic Fiat 500 all modelsFiat 124Fiat 125Fiat 126Fiat 127Fiat 128Fiat 600Fiat 850Fiat 900..
£2.34
Ex Tax:£1.95
Model: All models
Clutch Cable Securing Stud & Nuts to fit:Classic Fiat 500 all modelsFiat 126 all models If you have any questions please contact us for help..
£3.73
Ex Tax:£3.11
Model: Classic Fiat 500N/D/F/L all models
Set of 8 Cylinder Head Studs complete with Washers & Domed Nutsto fit:Classic Fiat 500 N/D/F/L all modelsIf you have any questions please contact us for help..
£83.94
Ex Tax:£69.95
Model: Classic Fiat 500, 126 all models (EXC BIS)
Set of 8 Cylinder Head Studs complete with Washers & Domed Nutsto fit:Classic Fiat 500R 594cc all modelsFiat 126 all air cooled modelsIf you have any questions please contact us for help..
£89.94
Ex Tax:£74.95
Model: Classic Fiat 500,126 & 600 all models
This Stainless Steel Bolt screws into the sides of the Distributor body to attach the metal spring clips to hold the Distribtor Cap in placeSupplied as ONE BoltFiat Part No: 9910387to fit:Classic Fiat 500 all modelsFiat 126 all models (exc BIS)Fiat 600 all models
..
£2.34
Ex Tax:£1.95
Model: Classic Fiat 500,126 & 600 all models
These Stainless Steel Bolts screw into the sides of the Distributor body and attach the metal spring clips to hold the Distribtor Cap in placeSupplied as a kit of TWO Stainless Steel Boltsto fit:Classic Fiat 500 all modelsFiat 126 all models (exc BIS)Fiat 600 all models..
£9.54
Ex Tax:£7.95
Model: 17mm Drive Shaft (N early models)
Drive Shaft Clip(for 17mm Drive Shaft)to fit:Classic Fiat 500 N EARLY MODELSIf you have any questions or queries please contact our office for help..
£0.90
Ex Tax:£0.75
Model: 19mm Drive Shaft (N,D,F early models)
Drive Shaft Clip(for 19mm Drive Shaft)to fit:Classic Fiat 500 N,D,F early modelsIf you have any questions or queries please contact our office for help..
£0.90
Ex Tax:£0.75
Model: 24mm Drive Shaft (F/L & R models, 126, 600)
Drive Shaft Clip(for 24mm Drive Shaft)to fit:Classic Fiat 500 F/L & R all models (from 1966 to 1974)Fiat 126 all modelsFiat 600If you have any questions or queries please contact our office for help..
£0.90
Ex Tax:£0.75
Model: all models
Set of FOUR Bolts & Spring Washers to fit the drive shaft coupling and flangeFiat Part No: 16044121to fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600If you have any queries or questions please contact our office for help..
£4.74
Ex Tax:£3.95
Model: all models
This Brass Nut is used to attach the Exhaust to the Manifold(8mm x 1.25 x 8)to fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600 all modelsFiat 850 all modelsFiat 900T/EIf you have any questions or queries please contact our office for help..
£1.20
Ex Tax:£1.00
Model: all models
This Stud is used to attach the Exhaust to the Manifold/Engine(8mm x 1.25 x 42)to fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600 all modelsFiat 850 all modelsFiat 900T/EIf you have any questions or queries please contact our office for help..
£1.14
Ex Tax:£0.95
Model: M8 Stud Length16mm/9mm/16mm
This is ONE metal stud with ONE Brass Nut and ONE spring washerThe stud has dimmensions 16mm/9mm/16mmThis is used to hold a manifold onto an engine or exhaust to head on multiple applicationsto fit:Classic Fiat 500Fiat 126Fiat 127Fiat 128Fiat 124Fiat 125Fiat 600Fiat 850Fiat 900PLUS MANY MORE..
£3.00
Ex Tax:£2.50
Model: Classic Fiat 500, 126 all air cooled models
This is a set of 6 Bolts & Washers to attach the Aluminium Crank Pulley Cover that houses the Oil Pump & Filter Fiat Part No: 13823621 to fit:Classic Fiat 500 all modelsFiat 126 all air cooled models If you have any questions please contact us for help..
£3.54
Ex Tax:£2.95