Suspension Parts

This Abarth Lowered Leaf Spring fits at the front of the car from left to right (wheel to wheel)The eyelets at each end have been reversed to lower down by aprox 20mm, has a bushat either end that attaches to the Stub Axles/KnucklesThis Spring is a 5 Leafto fit: ..

Sports Rear Suspension Coil Spring Kit Supplied as a matching pair only Stiffer and Shorter Finished in Ferrari Red (14.5 Gauge Spring) 185mm Lengthto fit:Classic Fiat 500 all models (up to 1973)If you have any questions please feel free to ask for help..

DISCLAIMERPLEASE BE AWARE THAT THIS IS A RETRO-FIT ITEM WHICH COMES WITH NO CERTIFICATIONS. IT IS IMPERATIVE THAT THIS PRODUCT IS FITTED BY A QUALIFIED MECHANICAL ENGINEER WHO UNDERSTANDS RETRO-FITTING TO ENSURE IT IS FITTED CORRECTLY AND SAFELY.IIIWhile the Front Leaf Spring can..

DISCLAIMERPLEASE BE AWARE THAT THIS IS A RETRO-FIT ITEM WHICH COMES WITH NO CERTIFICATIONS. IT IS IMPERATIVE THAT THIS PRODUCT IS FITTED BY A QUALIFIED MECHANICAL ENGINEER WHO UNDERSTANDS RETRO-FITTING TO ENSURE IT IS FITTED CORRECTLY AND SAFELY.IIIWhile the Front Leaf Spring can..

Brand NewMade in ItalySTANDARD FIVE LEAFThis Leaf Spring fits at the front of the car from left to right (wheel to wheel)Has a tendency to lose its spring effect over time and will become flatter, has a bushat either end that attaches to the Stub Axles/Knuckles..

This is the centre bump stop thats located at the top of the leaf spring in the centre (see photo)to fit:Classic Fiat 500 all modelsFiat 126 all modelsAutobiaanchi Bianchina all models..

OE QualityMade in ItalyMetal Clamp with a rubberised finish that clamps around the front Leaf Springto hold it in placeto fit:Classic Fiat 500 all modelsAutobianchi Bianchina all modelsIf you have any questions please contact us for help..

This Rubber Bush locates into the aluminium support that the Front Leaf Spring is secured toto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all models (up to 1999)If you have any questions please feel free to ask..

This is for TWO Nyloc Nut & Washer to secure the front leaf springHigh Tensile Zincto fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600 all modelsFiat 850 all modelsAutobianchi Bianchina..

This Aluminium Support holds the front leaf spring to the underneath of the chassisto fit:Classic Fiat 500 D/F/L/R/G all modelsIf you have any questions please feel free to ask..

High Quality Productmade by major manufacturer in ItalyThis metal and rubber bush fits into the Front Leaf Spring at each end and also into the Front Stub AxleDimmensons:Inner Diameter [mm] 10Outer Diameter [mm] 27Height 1 [mm] 45Height 2 [mm] 51to..

OE Quality PartsMade in Italy by OSRAVThis Shock Absorber comes with all Rubber Bushes and Nuts, ready to fitTo fit:Classic Fiat 500 all modelsFiat 126 all modelsIf you have any queries or questions please feel free to ask..

OE Quality PartsRubber Bush to fit onto the top and bottom of the Front Shock AbsorberDimmension:Outer Diameter 27mm, Inner 9mm, Thickness 15mmto fit:Classic Fiat 500 all models (up 1974)Fiat 126 all modelsIf you have any questions or queries please feel..

This kit is a full kit of rubber bushes, metal washers and nyloc nuts required for ONE shock absorberDimmension:Outer Diameter 27mm, Inner 9mm, Thickness 15mmto fit:Classic Fiat 500 all models (up 1974)Fiat 126 all modelsIf you have any questions or queries p..

These Shock Absorbers are Stiffer and ShorterFinished in Ferrari RedSupplied as a pair (2) with all Rubber Bushes and Nuts, ready to fitTo fit:Classic Fiat 500 all models (up to 1974)126 all air cooled models (up to 1999)(will NOT fit the 126 Bis)If yo..

High Quality Productmade by major manufacturer in ItalySupplied as ONE BushThis metal and rubber bush fits into the Front Suspension Arms/WishbonesDimmensons:Inner Diameter [mm]12Outer Diameter [mm] 25Length of Bush [mm]28Height total [mm] 26.5..

High Quality Productmade by major manufacturer in ItalySupplied as ONE BushThis metal and rubber bush fits into the Front Suspension Arms/WishbonesDimmensons:Inner Diameter [mm] 14Outer Diameter [mm] 29Length of bush [mm] 30.5Height total [mm] 30 ..

Brand NewMade in ItalyThis metal shim used to slide in between the spacer and the eyelets to adjust the camber at the front wheelsThis is for ONE ShimThickness 1mmto fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600 all modelsIf you have any questions please contact us for help..

Brand NewMade in ItalyThis is ONE Metal Bush (There are two per side fitted)Dimensions: Thickness 10mm, Diameter 26mmThis is a metal spacer that fits between the Front Wishbone and the chassis (see diagram)to fit:Classic Fiat 500 all modelsFiat 126 all models..

Branded PartsMade in ItalyThis kit consists of2x Front Suspension Arms with Bushes1x Nut and Boltfor one wheel of the car, you would need two kits for both wheelsto fit:Classic Fiat 500 N/D/F/L/R/GIf you have any queries or questions please fee..