Mechanical & Related Parts

Genuine Fiat PartsTo fit over the Brake and Clutch Pedal to add gripto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all  modelsFiat 850 Special & various modelsIf you have any queries or questions please feel free to ask..

Cleans brake & clutch parts without the need for dismantlingKey FeaturesCleans brake & clutch parts without the need for dismantling Fast evaporating with no residue Removes brake fluid, grease, oil and dust Helps maximise braking efficiency Helps prevent dust escaping into the wo..

Made in ItalyThis is for 190 PCD WheelsThis is a kit of FOUR brand new Brake Drum Backing Plates1x O/S Front Plate (RIC-2117)1x N/S Front Plate (RIC-2116)1x O/S Rear Plate (RIC-2119)1x N/S Rear Plate (RIC-2118)to fit:Classic Fiat 500 all models (up to 1974) ..

This Clip is used on many different models of Italian Cars from the early 70's to the 90'sFinished in Yellow Zinc..

Brake Pedal Bush Kit (2 piece)to fit:Classic Fiat 500 F,L,G all modelsIf you have any questions please contact us for help..

Brake Pedal Bush Kit (4 piece) to fit:Classic Fiat 500 N,D & F series 1 up to 1968  all models If you have any questions please contact us for help..

Brand NewThis is 65mm total length end to endto fit:Classic Fiat 500 N/D/F/LIf you have any questions please contact us for help..

Brand NewThis is 85mm total length end to endto fit:Classic Fiat 500 R all modelsFiat 126 all modelsIf you have any questions please contact us for help..

This spring is attached to the brake pedal to give it tension and return it to its starting position once depressedto fit:Classic Fiat 500 N & D all models (up to 1966)If you have any questions please feel free to ask..

This spring is attached to the brake pedal to give it tension and return it to its starting position once depressedto fit:Classic Fiat 500 N,D,F,L,R all models (up to 1974)Fiat 600 all modelsFiat 850 all modelsFiat 125 all  modelsIf you have any questions please fee..

This is a set of FOUR Brake ShoesTo fit Front or RearThese Shoes are not the self adjusting type as on some later modelsThese Shoes have a long top 'Lug' as opposed to another type that has a short top 'Lug' (see photo 3 to explain, these are the type on the left hand side)..

Good Quality Branded PartsMade in ItalySet of FOUR Brake Shoes to service two wheelsThey are the same on the Front & Rear of the vehicleComplete with Spring AdjustersThese shoes are made oversized with a thicker lining to improve the brake efficiencyand give a ..

This is a set of FOUR Brake ShoesTo fit Front or RearThese Shoes are not the self adjusting type as on some later modelsThese Shoes have a short top 'Lug' as opposed to another type that has a long top 'Lug'  (see photo 3 to explain, these are the type on the right hand side) ..

Good Quality Branded PartsMade by BREMBO or BOSCHSet of FOUR Brake Shoes to service two wheelsThey are the same on the Front & Rear of the vehicleComplete with Spring AdjustersTo Fit:Fiat 500 D/F/L (up to 1972)126 Early models (up to 1979)(Thes..

This Spring is located between the two Shoes to return them to their neutral positionThere are Two Springs fitted to each Brake DrumLength 100mmto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 594cc early models only (up to 1978)If you have any questions..

Made in ItalyThis is the Spring that fits between the Brake Shoes to pull them away from the Drumto fit:Classic Fiat 500 Giardinera all modelsAutobianchi PanoramicaIf you have any questions please contact us for help..

Fits many early model Fiat's, Lancia's and Alfa Romeos with course thread brake unions1.25mm Course Pitch Thread to suit M10 Brake Unionsto fit:Classic Fiat 500 F,L,R,G all models (from 1968 on)Fiat 126Fiat 127Fiat 128PLUS MANY MORE MODELSIf you ha..

1.25mm Course Pitch Thread to suit M10 Brake Unions with short threadto fit:Classic Fiat 500 N,D,F all models (up to 1968) with short unionsIf you have any questions or queries please feel free to ask..

Anti-seize assembly compound, with extreme temperature tolerance (-40C to +1150C)Key FeaturesAnti-seize assembly compound, with extreme temperature tolerance (-40C to +1150C) Forms a dense protective coating over metal parts - will not wash or burn off Helps prevent brake disc squeal ..

Protects metal parts against heat, seizure, corrosion, water and acidKey FeaturesProtects metal parts against heat, seizure, corrosion, water and acid Non-melt and non-drip formula High performance lubricating grease and anti-seize compound Lead free Effective temperature range -3..