Internal Rubbers and Seals

To fit over the Accelerator/Throttle Pedal to add gripto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all  modelsFiat 600 all modelsIf you have any queries or questions please feel free to ask..

Quality Rubber Made in ItalyThis rubber pad or grommet fits around the Bonnet and rear Engine Lid aperture to fit:Classic Fiat 500 all models..

This kit fits around the aperture of the front Bonnet Seal to make the opening and closingsmoother and keep the gaps consistentto fit:Classic Fiat 500 all modelsIf you have any questions or queries please feel free to ask..

This rubber cone shaped grommet fits onto the front panel and the bonnet closes down onto itIt is also used on the sunroof to stop the handle Length of Cone: 19mmDiameter of base: 19mm  to fit:Classic Fiat 500 all modelsFiat 126, Fiat 600, 1100 all ..

Genuine Fiat PartsTo fit over the Brake and Clutch Pedal to add gripto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all  modelsFiat 850 Special & various modelsIf you have any queries or questions please feel free to ask..

Made in ItalyThis is a Black Plastic Plug that fits into the hole where the check strap bolt fits intoto fit:Classic Fiat 500 F/L/R all modelsIf you have any questions please contact us for help..

Rubber Strap with reinforced holes at either end that connects to the Door to stop it flying backThere is one fitted per doorPrice is for ONE Strapto fit:Classic Fiat 500 N/D/G (suicide door) all modelsIf you have any questions please contact us for help..

This rubber pad or grommet fits around the Door aperture on the top and bottomThere are TWO per Doorto fit:Classic Fiat 500 all models..

These Grommets fit either side of the aperture of the rear Engine Lid to make the opening and closingsmoother and keep the gaps consistentto fit:Classic Fiat 500 all models (NOT Giardiniera)If you have any questions or queries please feel free to ask..

Made in ItalyThis is a Rubber Plug to fill the holes on the floor either side of the tunnelThere are usually 6 holes (3 per side)to fill hole 20mm Diameterto fit:Classic Fiat 500 all modelsIf you have any questions please contact us for help..

Pair of Fuel Tank Strap GasketsMade in CorkThese Cork Gaskets fit under the Tank Strapsto fit:Classic Fiat 500 D/F/L/R/G (with Large Petrol Tank)If you have any questions please contact us for help..

Handbrake Lever Gasketto fit:Classic Fiat 500 all models  (up to 1974)Fiat 126 early models (up to 1978)If you have any questions please contact us for help..

Handbrake Lever Rubber Seal Fiat Part No: 4045845to fit:Classic Fiat 500 D,F,L,R all models If you have any questions please contact us for help..

This is a Foam Gasket to fit around the Metal Hot Air Duct where it attaches to the bodywork underneaththe dashboardto fit:Classic Fiat 500 D/F/L/R/G all modelsIf you have any questions please contact us for help..

This rubber Seal site on the inside of the Oil Filler Cap and helps make the cap a tight fit so it will not leakto fit:Classic Fiat 500 D/F/L/R (up to 1974)  Not for GiardinieraFiat 126 all models (up to 1999)If you have any queries or questions please feel free to ask..

Rubber Plugs to hold the Aluminium Chassis PlateSupplied as a kit of TWO Rubber Plugs to fit:Classic Fiat 500 all modelsFiat 126 all modelsMany other Italian Car Models If you have any questions please feel free to contact us for help ..

Fibre Gasket to fit on the Pedal Box  to fit:Classic Fiat 500 N/D/F/L/G all modelsFiat 126 all models If you have any questions please contact us for help..

Fibre Gasket to fit on the Pedal Box  to fit:Classic Fiat 500 R all models If you have any questions please contact us for help..

This Rubber Blanking Plug is used to block a holeDimmensions:  to fit in hole 35mm wideto fit:Classic Fiat 500 all modelsClassic Fiat many modelsIf you have any questions please contact us for help..