Fuel System

The Best Quality Original Equipmentmade by BCD in ItalySupplied with one gasketto fit:Classic Fiat 500 all models D/F/L/R (up to 1973)Fiat 126 594cc early models with dynamo (up to 1976)Comes with ONE GasketIf you have any queries or questions please f..

Brand NewMade in ItalyThis is a Fuel Pump for the early Fiat 500 D models which uses a threaded fuel fittingThis Pump is supplied together with Two Paper Gasketsto fit:Classic Fiat 500 D all models (from chassis number 332432 to 746364)If you have a..

Made in Italyto fit:Classic Fiat 500 N/D all modelsIf you have any questions please contact us for help..

This Hardened metal push rod operates the Fuel Pump by the rotation of the engine  to fit:Classic Fiat 500 Giardiniera 499cc all models..

This Hardened metal push rod operates the Fuel Pump by the rotation of the engine  Length 178mm to fit:Classic Fiat 500 D/F/L 499cc (up to 1972)..

This is a relay that is usually required when you retro connect an electric fuel pump to a classic car, for safetyThis work is recomended to be undertaken by a qualified auto electricianKey FeaturesMounting Type: Plugged Number of Pins: 5 Operating Mode: Electronic Rated Current..

Brand NewMade in ItalyThis is for ONE Fuel Pump Spacer and TWO Gasketsto fit:Classic Fiat 500 Giardiniera F models..

This part fits between the Engine and the Fuel Pump, and has a Gasket at either sideDimmensions: 8.5mm Thicknessto fit:Classic Fiat 500 N/D/F/L 499ccFiat 600If you have any questions please contact us for help..

Made in Italyto fit:Classic Fiat 500 N/D all modelsIf you have any questions please contact us for help..

This Stud is used to attach the Fuel Pump to the EngineTWO required in total for one engine  (8mm x 1.25 x 54) to fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600 all modelsFiat 850 all modelsFiat 900T/E If you have any quest..

Brand NewMade in ItalyThis is a Fuel Pump for the early Fiat 500 D models with this type of threaded fittingThis Pump is supplied together with the Braided Hose and Two Paper Gasketsto fit:Classic Fiat 500 D all models (from chassis number 332432 to 746364)..

Its the time of year where some of us tuck our cars away for the long hard winter but we don't usually drain the fuel tank which can cause problems in spring when we bring themback out from hibernation. The modern fuels we buy are rich in ethanol and after a period of time this congeals and can ..

This thick Rubber Seals the Petrol Tank Sender Unit onto the Tank so there are no leaksto fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600 all modelsFiat 850 & 900 all modelsLancia FulviaIf you have any questions please feel free to ask..

Brand NewMade in ItalySupplied with Rubber Sealto fit:Autobianchi Bianchina  all models (up to 1960)If you have any questions please contact us for help..

OE Quality PartsThis has TWO BULLET connections for the warning light and guageto fit:Autobianchi Bianchina all models (inc berlina,cabrio,tranformabile & panoramica)..

This Unit fits into the Fuel Tank and has a float attached to guage the fuel levelHas ONE Round Pin Terminal as the 500D has no Fuel Warning GuageComes with a new Rubber Sealto fit:Classic Fiat 500 D all models (up to 1966)If you have any queries or questions ..

Brand NewThis is the plastic float that attaches to the Fuel Tank Sender Unit that sits inside the Fuel Tank and reads the Fuel Levelto fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600 all modelsFiat 850 all modelsIf you need any help please conta..

Brand NewMade in ItalyThis is a rubber insulator that slides onto the cable and pushes over the spade plug to stop damp getting indimms: L 21mm, OD 18mm, ID 13mmto fit:Classic Fiat 500 L modelsIf you have any questions please contact us for help..

Brand New Made in ItalyThis is a rubber insulator that slides onto the cable and pushes over the bullet plug to stop damp getting indimms: L 20mm, OD 13mm, ID 10mmto fit:Classic Fiat 500 N,D, F G & R modelsIf you have any questions please contact us for help..

Some vehicles can struggle to start when you turn the ignition, especially during the winter months where cold starting is a regular occurrence. Bradex Easy Start looks to provide a solution to this problem with a formula that is made up from a mixture of combustible solvents and lubricating oil. It..