Stub Axles and Steering Boxes

This is a high Tensile Bolt and Nut to fit through the Bottom of the Front Steering KnuckleM10 x 95mmto fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600Fiat 850If you have any questions please contact us for help..

This is a Brand New Kit of TWO Stub Axles for the Left & RightThey have new top Bushes, Pins, Washers and Bushes and are ready to installThe Kit also comes with two new Hub Nuts(Once fitted they must be greased fully using a grease gun until the grease goes all the way through..

This Lock Washer fits behind the Front Hub Nut that screws onto the Stub AxleFiat Part No: 985781 to fit:Classic Fiat 500 all models  (up to 1974)Fiat 600 all models If you have any questions or queries please contact our office for help..

High Quality Productmade by major manufacturer in ItalyThis metal and rubber bush fits into the Front Leaf Spring at each end and also into the Front Stub AxleDimmensons:Inner Diameter [mm] 10Outer Diameter [mm] 27Height 1 [mm] 45Height 2 [mm] 51to..

Brand NewFactory Standard Cast Iron Front Upright for Stub Axles (SAME FOR BOTH SIDES)Ready to install and recondition your old existing Stub AxlesSupplied with a New King Pin Repair Kit (ONE SIDE ONLY)Parts Supplied1x. Stub Axle Upright1x King Pin Repair Kit1x Top ..

Fully Reconditioned Steering Boxfor Left Hand Drive Cars onlyPLEASE NOTE: The Shaft has 17 Splines on the Shaft where it meets the Steering Shaft inside the carto fit:Classic Fiat 500R & 126 all modelsPLEASE NOTE: This is a reconditioned part so we would need your old St..

Fully ReconditionedThe Splines on the shaft have 18 TEETH where it joins the Steering Shaft inside the carThe holes on the steering arm are 10mm tapered to suit the 10mm steering joints for all early modelsThis is a Steering Box complete with the Arm for a Right Hand Drive veh..

Made in PolandThis Kit consist's of all the parts to overhaul ONE of Front Stub Axles(we would always recommend changing the top Stub Bushes at the same time, available above in related items)Fits:Classic Fiat 500 all modelsFiat 126 all modelsIf you have any ques..

This Kit consist's of all the parts to overhaul a pair of Front Stub AxlesIncluding Brass Bushes(we would always recommend changing the top Stub Bushes at the same time, available above in related items)Fits:Classic Fiat 500 all modelsFiat 126 all modelsIf you have a..

This Kit consist's of all the parts to overhaul a pair of Front Stub Axles(Including Top Bush, Brass Bushes, Steel Washers and Bearings to allow the steering to be lighter)One Bearing is installed on the bottom of each stub axle only to take the loadFits:Classic Fiat 50..

This is the left hand side Front Hub Nut that screws onto the Stub AxleM14 x 1.5mmto fit:Classic Fiat 500 all models  (up to 1974)Fiat 126 all models (up to 1999)Fiat 600Fiat 850If you have any questions or queries please contact our office for h..

This is the right hand side Front Hub Nut that screws onto the Stub AxleM14x1.5mmto fit:Classic Fiat 500 all models  (up to 1974)Fiat 126 all models (up to 1999)Fiat 600Fiat 850If you have any questions or queries please contact our office for help..

Brand NewMade in ItalyThis is a two piece Bush Kit to fit the pedal boxPlease check these are correct for your car as there are two types availableto fit:Classic Fiat 500 F,L,RIf you have any questions please contact us for help..

These Stub Axles are fully factory reconditioned in Italy using Brass Bushes to last much longerThey have new top Bushes, Pins, Washers and Bushes and are ready to fit.These Stub Axles are made for the early models of 500’s with the smaller trach rods ends (10mm track rod hole)..

This is a Reconditioned Kit of TWO Stub Axles for the Left & RightThese kits have BRAND NEW UprightsRoller BearingsTop BushesKing Pin's WashersBrass Bushes Hub Nuts x2and are readyto installThis kit is also modified with bearings top and bottom for a smoother actionSupplied with two new Hub Nuts(Onc..

Brand New Steering Boxfor Left Hand Drive Cars onlyPLEASE NOTE: The Shaft has 18 Splines on the Shaft where it meets the Steering Shaft inside the carto fit:Classic Fiat 500 F,L & Giardiniera all modelsAutobianchina Bianchini all modelsPLEASE NOTE:We would ask ..

Fully Reconditioned Steering Boxfor Left Hand Drive Cars onlyPLEASE NOTE: The Shaft has 18 Splines on the Shaft where it meets the Steering Shaft inside the carto fit:Classic Fiat 500 F & L all modelsPLEASE NOTE:  This is a reconditioned part so we would need your old St..

This kit comes as TWO Bearings for the Steering BoxOD : 35mmID : 15mmto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 early models (up to 1978)If you have any questions please feel free to ask..

Made in ItalyHeavy Bronze Bush Sleeveto fit:Classic Fiat 500 all modelsIf you have any questions please contact us for help..

This is a Gasket Kit including Oil Seals for the Steering Boxto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 594cc early models only (up to 1978)If you have any questions please feel free to ask for help..