Axles, Shafts, Joints and Couplings

Front Grease Cap fits on the Front Hub and acts as a dust & dirt shieldto fit:Fiat 126 all models (650cc & 704cc)Fiat 600 all modelsFiat 850 all modelsFiat 124 all modelsFiat 127 all modelsFiat 128 all modelsIf you have any questions please contact us for h..

OE QualityMade in Italyto fit:Classic Fiat Panda all modelsFiat UnoFiat 127 & 128 all modelsIf you need any help please contact us with the full chassis number of the car..

Brand New Made in ItalyInner Diameter 44mmFiat part No: 4443881to fit:Fiat Uno Fiat 127 all models Fiat Fiorino Autobianchi A112 all models Lancia A112 all models If you have any questions please contact us for help..

Brand NewMade in Italyto fit:Fiat 127 all modelsFiat 128 all modelsFiat FiorinoAutobianchi A112 all modelsLancia A112 all modelsIf you have any questions please contact us for help..

Connects the Gear Linkage assembly to the Gearbox in order to select GearsThis part has a rubber joint in the middle that after a while will perish and make itdifficult to select gearsto fit:Fiat 850 all modelsFiat 850T & 900T/EFiat 127 all modelsFiat 128 all mo..

Brand NewMade in ItalyThis is for ONE 4 piece kit includes a special locating stepped washer,bolt, spring washer and lock nut as per the phototo fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 850Fiat 127If you have any questions please contact u..

This Inner Drive Shaft Boot is clipped onto the outside of a metal flangeWould normally fit on the Left Hand Side of the vehicleIt has a built in Oil Seal to stop oil leaking and fits onto the Drive Shaft with a incapsulated plastic Bush(No 7 in the diagram)Diameter of base..

This Boot fits onto the drive shaft on the inside (engine/gearbox side)It has an built in Oil Seal and incapsulated plastic bush to fit onto the drive shaft to fit:Fiat 127, 128, Strada & X19 all modelsClassic Panda Early model..

This Inner Drive Shaft Boot fits into a three bolt flangeIt has a built in Oil Seal to stop oil leaking and fits onto the Drive Shaft with a incapsulated plastic Bush(No 10 in the diagram)to fit:PANDA 4X2 RL/86(1985 -1991) 750cc,903cc,999cc,1100cc PANDA 4X4 R/86 (1985 -1991) 99..

OE Equivalent PartsMade in ItalyTeeth: 20Diameter 25.5mmto fit:Classic Fiat Panda 903cc (from 1980 on)Fiat 127 903cc, 1049cc & 1301cc  (1971 to 86)Lancia A112  903cc Junior, 1049cc Abarth  (up to 86)If you have any questions please contact us for help..

Brand Newto fit:Fiat 127..

Brand NewMade in ItalyThis is the Rubber Boot as original for the Wheel End of the Drive Shaft onto the CV JointSupplied as a kit including1x Rubber Boot2x Metal Ties to secure1x Pouch of Greaseto fit:Fiat 127 all modelsIf you have any questions ple..

OE Quality PartsThis kit consists of1x CV Joint1x CV Boot1x Hub Nut1x Pouch of Greaseall clipsto fit:Classic Fiat Panda all models inc 4x4 (up to 2002)Fiat Uno all models (NOT Turbo)Fiat 127 & 128 all modelsLancia Y10 all modelsAutobian..

Polished Chrome Front Grease Cap fits on the Front Hub and acts as a dust & dirt shield Diameter 47mmFiat Part No: 814635,4410279to fit:Classic Fiat 500 GiardinieraFiat 126 all models (650cc & 704cc)Fiat 600 all modelsFiat 850 all modelsFiat 124 all models ..

OE Quality PartsThis is a Rear Wheel Hub & Bearing Complete(no 1 in the diagram)to fit:TO FIT ALL MODELS WITHOUT ABS:CINQUECENTO (170) ALL MODELS PANDA (141)  750, 903, 1000, 1100 SEICENTO ALL MODELS UNO 900 1.0 1.1 1.3TIPO 1400,1600,1700DS,1900DSTEMPRA 140..

The benefit of these tie straps over plastic ones is that they are made from non corrosive stainless steel They are mainly designed to be fitted to CV Boots which are under constant threat from water, heat and road grime..