Suspension

These Shock Absorbers are Stiffer and ShorterFinished in Ferrari RedSupplied as a pair (2) with all Rubber Bushes and Nuts, ready to fitTo fit:Classic Fiat 500 all models (up to 1974)126 all air cooled models (up to 1999)(will NOT fit the 126 Bis)If yo..

Brand NewFactory Standard Cast Iron Front Upright for Stub Axles (SAME FOR BOTH SIDES)Ready to install and recondition your old existing Stub AxlesSupplied with a New King Pin Repair Kit (ONE SIDE ONLY)Parts Supplied1x. Stub Axle Upright1x King Pin Repair Kit1x Top ..

High Quality Productmade by major manufacturer in ItalySupplied as ONE BushThis metal and rubber bush fits into the Front Suspension Arms/WishbonesDimmensons:Inner Diameter [mm]12Outer Diameter [mm] 25Length of Bush [mm]28Height total [mm] 26.5..

High Quality Productmade by major manufacturer in ItalySupplied as ONE BushThis metal and rubber bush fits into the Front Suspension Arms/WishbonesDimmensons:Inner Diameter [mm] 14Outer Diameter [mm] 29Length of bush [mm] 30.5Height total [mm] 30 ..

Brand NewMade in ItalyThis metal shim used to slide in between the spacer and the eyelets to adjust the camber at the front wheelsThis is for ONE ShimThickness 1mmto fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600 all modelsIf you have any questions please contact us for help..

Brand NewMade in ItalyThis is ONE Metal Bush (There are two per side fitted)Dimensions: Thickness 10mm, Diameter 26mmThis is a metal spacer that fits between the Front Wishbone and the chassis (see diagram)to fit:Classic Fiat 500 all modelsFiat 126 all models..

This kit consists of2x Front Suspension Arms with Bushes1x Nut and Boltfor one wheel of the car, you would need two kits for both wheelsHas a 14mm hole in bushto fit:Fiat 500R all modelsFiat 126 all modelsIf you have any queries or questions please feel..

This is a metal plate with welded studs to repair the Studs that hold the front wishbone linkThe distance between the two bolts center to center is 105mmto fit:Classic Fiat 500R all modelsFiat 126 all modelsIf you have any questions please contact us for help..

Brand NewThis is a front Wishbone Assembly of the Two Front Wishbonessupplied with Two new Bushes for one sideto fit:Fiat 126 all modelsIf you have any questions please contact us for help..

Brand Newmade in ItalyThis is a complete assembly consisting of1x  Triangle Wishbone & Bushes1x Supporting Bracketall FittingsAll ready to installto fit:Classic Fiat 500 R & Giardiniera modelsFiat 126 all models..

This is the link Bracket for the Front Suspension WishbonesM14to fit:Classic Fiat 500 RFiat 126 all modelsIf you have any questions please contact us for help..

This kit consists of1x  Suspension Link2x  Bush2x  Spacer to Chassis2x  Nylock Nut2x  Washerto fit:Classic Fiat 500 GiardinieraFiat 126 all modelsIf you have any questions please contact us for help..

A premium quality, high melting point, multi-purpose grease with EP additivesKey Features A premium quality, high melting point, multi-purpose grease with EP additives For use in all roller type, anti-friction and plain bearings subjected to high load conditions For use in all rol..

This Metal Bracket is used to attach the Rear Suspension Arm to the chassisN/S Left Hand Sideto fit:Classic Fiat 500 D/F/L/R/G all models (up to 1974)Fiat 126 all modelsIf you have any questions please feel free to ask..

N/S Left Hand Rear Suspension ArmProne to Rotting if not protectedto fit:Fiat 126 all models (BIS are not availbe so these can be used but the rear shocks would need to be changed RIC-2582)..

This Metal Bracket is used to attach the Rear Suspension Arm to the chassisO/S Right Hand Sideto fit:Classic Fiat 500 D/F/L/R/G all models (up to 1974)Fiat 126 all modelsIf you have any questions please feel free to ask..

O/S Right Hand Rear Suspension ArmProne to Rotting if not protectedto fit:Fiat 126 all models (BIS are not availbe so these can be used but the rear shocks would need to be changed RIC-2582)..

This is a PAIR (2) of Front Adjustable COIL OVER Shock AbsorbersFitted with Harder Poly Bushes Top & BottomThese Shock Absorbers MUST be fitted to a car with an Independent Subframe and NOT a Leaf Spring(we also sell a complete independent suspension kit with subframe and shocks) ..

Brand NewMade in ItalyThis is for TWO Rear Coil SpringThis is a Lowered Rear Coil SpringHeight 170mmto fit:Fiat 126 all modelsIf you have any questions please contact us for help..

Brand NewMade in ItalyThis is for TWO Rear Coil SpringThis is a Lowered Rear Coil SpringHeight 190mmto fit:Fiat 126 all modelsIf you have any questions please contact us for help..