Rubber Boots & Gaiters

These parts are to fit a 22/24mm diameter Drive ShaftThis is a kit consisting of the following2x Outer Drive Shaft Boot (RIC-1591)2x Inner Drive Shaft Boot (metal bush) (RIC-380)2x Drive Shaft Spring (RIC-937)2x Drive Shaft C Clip (RIC-947)to fit:Classic Fiat 50..

This rubber Boot fits onto the cable and over the Dynamo terminal to protect and insulate itThere are two options to choose SMALL or LARGEto fit:Classic Fiat 500 all models (up to 1973)Fiat 126 594cc early models with Dynamo (up to 1976)Dimmensions:Total Length: 45m..

Made in ItalyThis black rubber boot/gaiter fits at the bottom of the gear lever to cover the hole in the floorSupplied with the metal plate with four holes to attach it to the floorto fit:Classic Fiat 500 D,F,L,R all modelsFiat 126 air cooled all early models..

This is a black metal plate with four holes to attach a rubber gear lever boot to the floor Dimmensions: 110mmx90mmScrew Hole centre to centre: 80mm x 65mmto fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600 all models..

Rubber Boot For Gear Linkage to Gearbox(No 5 in the Diagram)to fit:Classic Fiat 500 D/F/L/R all modelsFiat 126 all modelsIf you have any questions please contact us for help..

Rubber Boot For Gear Linkage to Tunnelto fit:Classic Fiat 500 D/F/L/R all modelsIf you have any questions please contact us for help..

Brand NewThis Rubber Seal surrounds the parking light hole and the bulb holder pushes through itto fit:Fiat 126 all modelsIf you need help please ask a question..

Rubber Head Lamp Bulb Cover to insulate and keep the damp out of the Head LampFits at the rear of the Head Lamp and the Bulb connector fits through itto fit:Classic Fiat 500 all modelsFiat 126 all models Fiat 600 all modelsFiat 850 all models..

Quality RubberMade in ItalyThis Boot fits on the inside of the Drive Shaft where it connects to the GearboxIt has an internal Oil Seal to stop the oil leaking and a Plastic Bush to fit onto the ShaftDiameter: 22-24mm (larger type shaft)to fit:Classic Fiat 500 F..

Quality Rubbermade in ItalyThis Boot fits on the inside of the Drive Shaft where it connects to the GearboxIt has an internal Oil Seal to stop the oil leaking and a Metal Bush to fit onto the ShaftDiameter: 22-24mm (larger type shaft)to fit:Classic Fiat 500 F/L..

Brand NewMade in ItalyThis is a Rubber Boot to insulate the connection on the Oil Pressure Switchto fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600 all modelsFiat 850 all modelsIf you have any questions please contact us for help..

These parts are to fit a 22/24mm diameter Drive ShaftThis is a kit consisting of the following2x Outer Drive Shaft Boot2x Drive Shaft Spring2x Drive Shaft C Clipto fit:Classic Fiat 500 all models (with 22/24mm diameter Drive Shaft)Fiat 126 all models..

This Boot fits on the outside of the Drive Shaft where it connects to the WheelIt is basically a rubber dust cover and fits onto the Drive Shaft and around the lip of the Flange Diameter:  17mm (smaller type shaft)(These are designed to be nice tight fit so they may seem to sma..

Made in ItalyThis Boot fits on the outside of the Drive Shaft where it connects to the WheelIt is basically a rubber dust cover and fits onto the Drive Shaft and around the lip of the Flange Diameter:  19mm (smaller type shaft)(These are designed to be nice tight fit so they ma..

Made in ItalyThis Boot fits on the outside of the Drive Shaft where it connects to the WheelIt is basically a rubber dust cover and fits onto the Drive Shaft and around the lip of the FlangeDiameter:  22-24mm (larger type shaft)(These are designed to be nice tight fit so they ma..

This rubber Boot fits onto the cable and over the battery terminal to insulate itFits most Battery TypesFor the POSITIVE + Terminal Dimmensions:Length: 57mmWidth: 40mmDepth: 20mmInternal Diameter of Wire Cover: 15mmLength of Wire Cover: 35mm ..

This is a rectangular rubber Hose that connects the hot air from the tunnel to the dashboard for demisting the windscreen and heatto fit:Fiat 126 all models If you have any questions please contact us for help..

The benefit of these tie straps over plastic ones is that they are made from non corrosive stainless steel They are mainly designed to be fitted to CV Boots which are under constant threat from water, heat and road grime..

This kit consists of1x  Lever Return Spring1x  Rubber Button Cover1x  Rubber Dust Coverto fit:Classic Fiat 500 all modelsFiat 126 all models with Lever StartIf you have any questions please contact us for help..

This Rubber Boot is located on the Starter Motor Lever to protect it from dirt and dampto fit:Classic Fiat 500 all modelsFiat 126 all pull-start modelsIf you have any questions please contact us for help..