Engine Gaskets & Kits

Brand New Genuine Fiat PartsThis Rubber O'Ring fits behind the Centrifugal Oil Filter Cover to stop any leaksYou should always change this O'Ring when you take the cover off to clean the filterto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all models (up to 199..

This is the thin type Rubber Seal as opposed to the later style Seal which is much wider Supplied as a kit of 10 Seals for all 5 Push Rod Tubes to fit:Classic Fiat 500 N/D/F/L/G (499cc) all models If you have any queries or questions please feel free to ask..

This is the thick type Rubber Seal as opposed to the earlier style Seal which is much narrower Supplied as a kit of 10 Seals for all 5 Push Rod Tubes to fit:Classic Fiat 500 N/D/F/L/R (with 594cc & 652cc) all modelsFiat 126 all models If you have an..

This is a paper gasket to fit on the Rear Main Crank Bearing Housingto fit:Classic Fiat 500 all modelsFiat 126 all modelsIf you have any questions please contact us for help..

These Washers are fitted to the top Rocker Cover Bolts to stop oil leakingto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all models (up to 1999)If you have any queries or questions please feel free to ask..

This is a top Rocker Cover Gasket to fit between the Cylinder Head and the Top Rocker CoverMade in CORKSupplied with TWO Fibre Washersto fit:Classic Fiat 500 499cc D,F,L,R all models (up to 1974)Fiat 126 early model 594cc (up to 1976)..

This is a top Rocker Cover Gasket to fit between the Cylinder Head and the Top Rocker CoverMade in CorkSupplied with TWO Fibre Washersto fit:Classic Fiat 500 Giardiniera all modelsFiat 126 594cc & 650cc all modelsPanda 30 650cc all modelsAutobianchi Bianchina..

This is a top Rocker Cover Gasket to fit between the Cylinder Head and the Top Rocker CoverMade in RUBBERSupplied with TWO Fibre Washersto fit:Classic Fiat 500 499cc D,F,L,R all models (up to 1974)Fiat 126 early model 594cc (up to 1976)..

This is a top Rocker Cover Gasket to fit between the Cylinder Head and the Top Rocker CoverMade in RubberSupplied with TWO Fibre Washersto fit:Classic Fiat 500 Giardiniera all modelsFiat 126 594cc & 650cc all modelsPanda 30 650cc all modelsAutobianchi Bianchina..

OE Quality GasketsMade in ItalyThis is a one piece CORK Sump Gasketto fit:Classic Fiat 500 N,D,F,L,R all models (up to1974)Fiat 126 early model 594cc & later 650cc (up to 1986)Fiat Panda 30 650cc (up to 1986)If you have any questions please c..

This is a thick paper Gasket to fit onto an Alloy Sumpto fit:Classic Fiat 500 all models (except Giardiniera)Fiat 126 all air cooled modelsFiat Panda 30If you have any questions please contact us for help..

OE Quality GasketsMade in ItalyThis is a one piece RUBBER Sump Gasketto fit:Classic Fiat 500 N,D,F,L,R all models (up to1974)Fiat 126 early model 594cc & later 650cc (up to 1986)Fiat Panda 30 650cc (up to 1986)If you have any questions please..

This is a one piece Paper Sump Gasket Fiat Part No:   to fit:Classic Fiat 500 Giardiniera all models   If you have any questions please contact us with the details/full chassis number of the car..

Timing Chain Cover GasketFiat Part No: 4049953to fit:Classic Fiat 500 Giardiniera all modelsIf you have any questions please contact us for help..

Timing Chain Cover Gasketto fit:Classic Fiat 500 D,F,L,R all modelsFiat 126 594cc & 652cc all modelsIf you have any questions please contact us for help..

Copper has better Heat Properties than standard Gasket material and will last longerSupplied as a set of 4 Gasket,2x Manifold Gasket2x Exhaust Gasketto fit:Classic Fiat 500 D/F/L/RFiat 126 600cc/650cc  (NOT Bis)If you have any questions please contact us for h..

This Copper Uprated Gasket fits between the Exhaust and the Manifold/ElbowThis is for TWO (2) GasketsCopper has better Heat Properties than standard Gasket material and will last longerto fit:Classic Fiat 500 D/F/L/RFiat 126 600cc/650cc  (NOT Bis)If you have..

This Copper Uprated Gasket fits between the Manifold/Elbow and the Cylinder HeadThis is for TWO (2) GasketsCopper has better Heat Properties than standard Gasket material and will last longerto fit:Classic Fiat 500 D/F/L/RFiat 126 600cc/650cc  (NOT Bis)If you..

This metal Uprated Gasket fits between the Exhaust and the Manifold/ElbowThis is for TWO (2) Gasketsto fit:Classic Fiat 500 N/D/F/L/RFiat 126 600cc/650cc  (NOT Bis)..

This metal Uprated Gasket fits between the Head and the Manifold/ElbowThis is for TWO (2) Gasketsto fit:Classic Fiat 500 N/D/F/L/RFiat 126 600cc/650cc  (NOT Bis)..