Fiat/Seat 600 Parts

Set of NGK Spark PlugsSupplied as a set of FOUR (4) Spark Plugsto fit:Fiat 600 633cc & 769cc all models ( 1956 to 77)If you have any questions please contact us for help..

Rubber Bush to fit onto the top and bottom of the Shock Absorber and are mostcommonly fitted to the Rear Shock Absorbers on the classic Fiat 500 and 126Dimmension:Outer Diameter 38mm, Inner 14mm, Thickness 11mmto fit:Classic Fiat 500 all models (up..

This Rubber Boot fits behind the Side Repeater on the front wing and has a hole for the wire to connect to the backof the LampWill protect from dampto fit:Classic Fiat 500 D/F/L/R/G (up to 1973)Fiat 600 all late models..

Fits on the side of the Front Wing with two boltsSupplied with new Rubber GasketWhite/Clear to fit:Classic Fiat 500 D/F/L/RFiat 600 all late modelsIf you have any questions please contact us for help..

This plastic Clip is used to attach the Chrome/Aluminium Sill Moulding below the doorsDiameter 8mmto fit:Classic Fiat 500 all models (up to 1974)Fiat 600 all modelsIf you have any questions please feel free to ask..

This is a popular Bulb that fits many classic carsUsually used for Rear Lamps Part No:  (382) 12v-21w If you have any questions please feel free to ask..

This is a popular Bulb that fits many classic carsUsually used for Front Side Lamp, side repeater and dashboardPart No:  (233) 12V/4WIf you have any questions please feel free to ask..

Installation, Maintenance and Setup of these SU CarburettorsThis Manual gives information on Tuning, Maintenance and Service on the following SOLEX CarbsC32 PAIA-732 PAIA-444 PHHPlus many others..

This is a Cable that is made for the VEGLIA Speedo Clusters which have a rev counter, they fit from the speedoback to a drive on the Distributor (sold separately)to fit:Fiat 600 all modelsIf you have any questions please contact us for help ..

This Stainless Steel Bolt has a large Domed Head to fit flush with the Stainless Steel Bumpers we also sell and comes with a new Washer and NutLength : 120MMThread : M8to fit:Classic Fiat 500 all modelsFiat 126Fiat 600Plus many othersIf you have any q..

This Stainless Steel Bolt has a large Domed Head to fit flush with the Stainless Steel Bumpers we also sell and comes with a new Washer and NutLength : 80MMThread : M8(If your Classic Fiat 500 has Chrome Knudge Bars fitted front and rear then you need the extra long Chrome Bolts) ..

Brand NewMade in ItalyThis is for TWO Starter Motor Brushesto fit:Fiat 500 Topolino all modelsClassic Fiat 500 all modelsFiat 126 all modelsFiat 600 all modelsFiat 850 all modelsFiat 900T/E all modelsFiat 1100If you have any questions p..

This rubber Boot fits onto the cable and over the Starter Motor terminal or any electrical terminal to protect and insulate itIf you need any help please contact us..

This rubber Boot fits onto the cable and over the Starter Motor terminal or any electrical terminal to protect and insulate itIf you need any help please contact us..

This kit comes as TWO Bearings for the Steering BoxOD : 35mmID : 15mmto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 early models (up to 1978)If you have any questions please feel free to ask..

Steering Box Oil Sealto fit:Classic Fiat 500 N/D models (up to 1966)Fiat 600 early suicide door models  (up to 1965)If you have any questions please contact us for help..

With this kit you can replace the Bushes and Bolt on your Steering Idler to reduce any play in the SteeringKit consists of,2x  Original Bushes (OD-29mm)1x  Bolt2x  Washers1x  Lock NutDimmensons of Bush:Inner Diameter [mm] 13Outer Diameter [mm] 29Hei..

With this kit you can replace the Bushes and Bolt on your Steering Idler to reduce any play in the SteeringKit consists of,2x  Original Bushes (OD-31mm)1x  Bolt2x  Washers1x  Lock NutDimmensons of Bush:Inner Diameter [mm] 13Outer Diameter [mm] 31Hei..

This Aluminium Steering Idler comes complete with Bushes, Bolt, Washers and Nut For Right Hand Drive ONLY    to fit:Classic Fiat 500 all models (up to 1974)Fiat 126 early models (up to 1978)Fiat 600 all modelsFiat 850 all models ..

This Aluminium Steering Idler comes complete with Bushes, Bolt, Washers and NutFor Left Hand Drive vehicles ONLY(4272883 in the diagram)to fit:Classic Fiat 500 all models (up to 1974)Fiat 126 early models (up to 1978)Fiat 600 all modelsFiat 850 all models ..