850

Brand NewMade in ItalyONE Rear Drive ShaftLength 433mmDiameter 22mmto fit:Fiat 600 (from 1955 on)Fiat 850 Series 2If you have any questions please contact us for help..

This is the Dry Type standard Coil (NOT Oil Filled Type)This is an alternative and direct replacement to the standard Coil and works better in a hot engine bayResistance 1.75 ohm15 = POSITIVE1= NEGATIVEFits many different models including:Fiat 500 all models ..

This rubber Boot fits onto the cable and over the Dynamo terminal to protect and insulate itThere are two options to choose SMALL or LARGEto fit:Classic Fiat 500 all models (up to 1973)Fiat 126 594cc early models with Dynamo (up to 1976)Dimmensions:Total Length: 45m..

Non Adjustable Electronic Type Voltage RegulatorThis part fits to the rear Bulkhead of vehicle and connects to the DynamoFitted to an Aluminium plate for coolingto fit:Classic Fiat 500 all models (with Dynamo)Fiat 126 all early models up to 1978 (with Dynamo)Fi..

These Grommets fit either side of the aperture of the rear Engine Lid to make the opening and closingsmoother and keep the gaps consistentto fit:Classic Fiat 500 all models (NOT Giardiniera)If you have any questions or queries please feel free to ask..

Rubber Seal that fits around the aperture of the Rear Engine Lid to seal it from water and dampto fit:Fiat 850 Berlina Saloon, Special all modelsIf you have any queries or questions please feel free to ask..

Top Rubber Mounting Bushto fit:Fiat 600 all modelsFiat 850 all modelsIf you have any questions please contact us for help..

Four Branch Exhaust Silencer with Straight Chrome Tail PipeQuality Partmade in Italy by IMASAFto fit:Fiat 850 Sports, Spider(This Exhaust can also be fitted to the 850/900 T/E if the existing Manifold is beyond repair)If you have any questions please contact us..

Four Branch Exhaust Silencer with Chrome Side Tail PipeQuality Partmade in Italy  to fit:Fiat 850 Sports, Coupe, Spider(This Exhaust can also be fitted to the 850/900 T/E if the existing Manifold is beyond repair) If you have any questions pleas..

This Brass Nut is used to attach the Exhaust to the Manifold(8mm x 1.25 x 8)to fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600 all modelsFiat 850 all modelsFiat 900T/EIf you have any questions or queries please contact our office for help..

Brand NewMade in Italyto fit:Autobianchi A112 903cc,965cc & 1048cc  & Abarth (from 1971 on)Classic Fiat Panda 769cc, 843cc, 899cc & 903cc (from 1980 on)Fiat Uno 903ccFiat Cinquecento 899cc all modelsFiat Seicento 899cc all modelsFiat 127 903cc (from 1971 on..

Quality Partmade in Italyto fit:Fiat 850 Saloon/Berlina, 850T & 900T/EIf you have any questions please feel free to ask..

This is a metal stud with these dimmensionsTotal Length 41mmThread 16mmShoulder 9mmThread 16mmThread Size M8to fit:Fiat Various modelsLancia Various modelsAlfa Romeo Various modelsAutobianchi Various modelsIf you have any questions please contac..

This is a metal stud with these dimmensionsTotal Length 37mmThread 20mmShoulder 7mmThread 10mmThread Size M8to fit:Fiat Various modelsLancia Various modelsAlfa Romeo Various modelsAutobianchi Various modelsIf you have any questions please contac..

This is a metal stud with these dimmensionsTotal Length 47mmThread 23mmShoulder 9mmThread 15mmThread Size M8to fit:Fiat Various modelsLancia Various modelsAlfa Romeo Various modelsAutobianchi Various modelsIf you have any questions please contac..

This Stud is used to attach the Exhaust to the Manifold/Engine(8mm x 1.25 x 42)to fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600 all modelsFiat 850 all modelsFiat 900T/EIf you have any questions or queries please contact our office for help..

Multigrade Motor Oil(15W/40)Suitable for older and classic carsHigh quality 15W/40 mineral engine oil to meet the requirements of API SL/CG-4; ACEA A3/B3: MB: 229.1: Volvo: VDS-2Key FeaturesEnsures lubricant performance Excellent high & low temperature performance ..

Made in ItalyThis is a Rubber Plug to fill the holes on the floor either side of the tunnelThere are usually 6 holes (3 per side)to fill hole 20mm Diameterto fit:Classic Fiat 500 all modelsIf you have any questions please contact us for help..

Flywheel Ring Gear Dimensions: O.D. 247mm I.D. 222mm Thickness 12mm 115 Teeth Fiat Part No: 4109024to fit:Fiat Uno 903ccFiat Panda 903ccFiat 850 (1964-1971)Fiat 850 Spider (1965-1968)Fiat 850 Coupé (1965-1968)Fiat 850 Spéciale (1968-1971)Fiat 850 Sport Coupé (1968-1..

DISCLAIMERPLEASE BE AWARE THAT THIS IS A RETRO-FIT ITEM WHICH COMES WITH NO CERTIFICATIONS. IT IS IMPERATIVE THAT THIS PRODUCT IS FITTED BY A QUALIFIED MECHANICAL ENGINEER WHO UNDERSTANDS RETRO-FITTING TO ENSURE IT IS FITTED CORRECTLY AND SAFELY.IIIMade in ItalyWhile the..