Brakes

This metal Clip is fitted into the Brake Drum to secure the Brake ShoesFiat Part No: 5952868 (no 6 in the diagram)to fit: (FIAT) - MD 126 BIS (1987-1999)   (FIAT) - MR UNO R/89 900-1.0-1.1 (1989-1995)   (FIAT) - MS UNO R/89 1.1-1370-1.5 (1989-1995)  ..

This is a kit of clips and springsto fit:Classic Fiat 500 Giardiniera (estate)Fiat 126 all models (from 1979 on)Fiat 850 all modelsAutobianchi Furgincino..

These Metal Clips are fitted into the Brake Drum to secure the Brake ShoesThe Kit is supplied with4x Brake Clip4x Brake Securing PinFiat Part No: 5952868 (no 6 in the diagram)to fit:(FIAT) - MD 126 BIS (1987-1999) (FIAT) - MR UNO R..

Good Quality Branded PartsMade in ItalySet of FOUR Brake Shoes to service two wheelsThey are the same on the Front & Rear of the vehicleComplete with Spring AdjustersThese shoes are made oversized with a thicker lining to improve the brake efficiencyand give a ..

Good Quality Branded PartsMade by BREMBO or BOSCHSet of FOUR Brake Shoes to service two wheelsThey are the same on the Front & Rear of the vehicleComplete with Spring AdjustersTo Fit:Fiat 500 D/F/L (up to 1972)126 Early models (up to 1979)(Thes..

Brand NewMade in ItalyThis is a kit of Brake Shoe Return Springs and Shoes Fitting Clips for ONE Car (BOTH SIDES)to fit:Classic Fiat Panda all models (up to 1991 but would require details of the car to confirm)Fiat Uno all models (except Turbo ie)Fiat Cinquecento al..

This Spring is located between the two Shoes to return them to their neutral positionThere are Two Springs fitted to each Brake DrumLength 100mmto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 594cc early models only (up to 1978)If you have any questions..

Made in ItalyThis is for a kit of FOUR (4) Springs for both sidesLength 114mmto fit:Fiat 126 (from 1978/79 on) with 98 PCD WheelsFiat 128A112If you have any questions please contact us for help..

Set of FOUR Premium Brake Shoes to service two wheelsThey are the same on the Front & Rear of the vehicleCome complete with Spring Adjusters185mm Diameterto fit:Fiat 126 all models (from 1979 to 1999)(If your car has the 190 PCD Wheel Bolt Spacing then you wou..

Common on a lot of early FiatsSize: M10 x 1.25Fits:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600 all modelsFiat 850 all modelsIf you have any questions please contact us for help..

Fits many early model Fiat's, Lancia's and Alfa Romeos with course thread brake unions1.25mm Course Pitch Thread to suit M10 Brake Unionsto fit:Classic Fiat 500 F,L,R,G all models (from 1968 on)Fiat 126Fiat 127Fiat 128PLUS MANY MORE MODELSIf you ha..

Fits most later model Fiat's, Lancia's and Alfa Romeos with fine thread brake unions 1.00mm Course Pitch Thread to suit M10 Brake Unions  If you have any questions or queries please feel free to ask..

This kit comprises of all Seven(7) Black Coated Steel & Copper Lined Brake Pipes and Joints ready to fitto your Fiat 126to fit:Fiat 126 all modelsIf you have any questions please contact us for help..

This kit comprises of all Seven(7) Galvanised Brake Pipes and Joints ready to fitto your Fiat 126to fit:Fiat 126 all modelsIf you have any questions please contact us for help..

Brand NewThis is a coil of 7.5 metres of Copper Coil with 4.76mm diameterto fit the brake unions..

Anti-seize assembly compound, with extreme temperature tolerance (-40C to +1150C)Key FeaturesAnti-seize assembly compound, with extreme temperature tolerance (-40C to +1150C) Forms a dense protective coating over metal parts - will not wash or burn off Helps prevent brake disc squeal ..

Protects metal parts against heat, seizure, corrosion, water and acidKey FeaturesProtects metal parts against heat, seizure, corrosion, water and acid Non-melt and non-drip formula High performance lubricating grease and anti-seize compound Lead free Effective temperature range -3..

Standard Brake Fluid for older vehicles where a DOT 3 fluid is specifiedKey FeaturesStandard Brake Fluid for older vehicles where a DOT 3 fluid is specified Suitable for use in drum, disc, tandem brake & hydraulic clutch systems Can be mixed safely with other fluids meeting FMVSS 116,..

Product InformationDOT 4 brake fluid is a high quality brake fluid recommended for use in the hydraulic brake and clutch systems of all cars, commercial vehicles and motorcycles for which a glycol based DOT 3 or DOT 4 fluid is specified. With a higher boiling point than DOT 3 fluid, this fluid i..

Product InformationDOT 4 brake fluid is a high quality brake fluid recommended for use in the hydraulic brake and clutch systems of all cars, commercial vehicles and motorcycles for which a glycol based DOT 3 or DOT 4 fluid is specified. With a higher boiling point than DOT 3 fluid, this fluid i..