%20[LIMITED%20to%20500px]-640x560w.jpg "Fiat 238,241,242")
Model: Classic Fiat 500 F,L,R & 126 (except BIS)
Sports Performance Air Filter Kit consists of1x Carburettor Air Filter (fitted to the elbow off the top of the Carburettor)1x Rocker Cover Breather Filter (fitted to the breather hole on the Rocker Cover)1x Air Filter Housing Top Cover (to cap it off)The Air Filter Housing Co..
£35.94
Ex Tax:£29.95
Model: Classic Fiat 500, 126 all air cooled models
This Stud is used to mount the Carb onto the Cylinder HeadDimms: M6 x 56mmto fit:Classic Fiat 500 all modelsFiat 126 All air cooled modelsIf you have any questions please contact us for help..
£2.34
Ex Tax:£1.95
Model: many models
Norma Stainless Steel Clip
10mm band width with a rolled edge to prevent the clip cutting into the hose.
The band is stainless steel and the screw mild steel.
Size 9.5mm to 12mm
to fit: CAVIS 5x9mm size Fuel Hose..
£2.10
Ex Tax:£1.75
Model: To fit WEBER 24 IMB,26 IMB & 28 IMB
This is a Brass Screw & Fibre Washer that fits at the top of the carburettor where the filter is housedCompatible withWEBER 24 IMBWEBER 26 IMBWEBER 28 IMBNumber 51 & 52 in the diagramto fit:Classic Fiat 500 N/D/F/L/R all modelsFiat 126 air cooledAutobianchi ..
£4.74
Ex Tax:£3.95
Model: Classic Fiat 500, 126 all air cooled models
This is a complete kit consisting of1x WEBER 40 DCOE (Italian Reconditioned)2x Trumpets2x Support Bracket1x Inlet Manifold Complete1x Cable & Sheathall x fittings, gasketsto fit:Classic Fiat 500 all modelsFiat 126 air cooled all modelsIf you have any..
£1,074.00
Ex Tax:£895.00
Model: Protects and lubricates soft valve seats
Product InformationA treatment for petrol engines, which protects the valves and reduces their wear when using unleaded petrol.Key FeaturesA treatment for petrol engines, which protects the valves and reduces their wear when using unleaded petrol.
Comes with full on pack instruction..
£11.94
Ex Tax:£9.95
Out Of Stock
Model: Classic Fiat 500 & 126 Air Cooled all models
Accelerator Linkage Metal ClipConnect the Accelerator Linkage Rod to the CarburettorFIAT PART NO: 814838to fit:Classic Fiat 500 all modelsFiat 126 all Air Cooled modelsIf you have any questions please contact us for help..
£1.80
Ex Tax:£1.50
Out Of Stock
Model: Classic Fiat 500 & 126 all models (Right Hand Drive ONLY)
Brand New Genuine Fiat Right Hand Drive models onlyto fit:Classic Fiat 500 all models (Right Hand Drive ONLY)Fiat 126 all modelsIf you have any questions please contact us for help ..
£100.99
Ex Tax:£84.16
Out Of Stock
Model: Classic Fiat 500 N/D/F/L/R & 126 air Cooled all models
This is a 15mm thick aluminium spacer thats fitted to the bottom of the carb onto the bakelight spacer to lift itin the event that its touching an alloy rocker cover or fouling on something thats non standard fitto fit:Classic Fiat 500 N/D/F/L/R (with 26/28IMB carb fitted)Fiat 1..
£23.94
Ex Tax:£19.95
Out Of Stock
Model: all models WEBER 30 DGF
Brand NewMade by WEBER Twin 30 DGF Carburettor (We can also supply an Inlet Manifold for this depending on what Engine/Cylinder Head you would like to use it with) to fit:Classic Fiat 500 (with 650cc Engine fitted)Fiat 126 all models including BIS I..
£353.62
Ex Tax:£294.68
Out Of Stock
Model: Fiat 126 ELX (Polish version)
This Spacer has TWO Brass Vacuum Pipes to fit:Fiat 126 ELX (Polish version)If you have any questions please contact us for help..
£37.83
Ex Tax:£31.53
Out Of Stock
Model: Fiat 126 Bis all models
Genuine Fiat PartSpacer to fit underneath the CarburettorFiat Part No: 5990512to fit:Fiat 126 Bis all modelsIf you have any questions please contact us for help..
£31.52
Ex Tax:£26.26
Out Of Stock
Model: Classic Fiat 500,126 (WEBER 24,26 & 28 IMB)
Brand NewThis is a choke mechanism for the WEBER 24 IMB, 26 IMB & WEBER 28 IMBto fit:Classic Fiat 500 N/D/F/L/RFiat 126 all air cooled modelsIf you have any questions please contact us for help..
£37.83
Ex Tax:£31.53
Out Of Stock
Model: Classic Fiat 500 & 126
This is a kit of aluminium flexible supports to the inlet manifoldSupplied with GasketsSize: 40mmFor WEBER Twin 40 DHLAto fit:Classic Fiat 500Fiat 126 air cooled..
£95.94
Ex Tax:£79.95
Out Of Stock
Model: Fiat 126 704cc Bis (up to 1991)
This is the idle Float that is inside the CarburettorDimmensions: 45mm x 28mmto fit:Fiat 126 704cc BIS all models (up to 1991)If you have any questions please feel free to ask..
£23.94
Ex Tax:£19.95
Out Of Stock
Model: Classic Fiat 500 & 126 all models (exc BIS)
Alloy Carburettor Inlet Manifold with GasketsFor Dellorto 32 FZD & SU Carbsto fit:Classic Fiat 500 all modelsFiat 126 all models (exc BIS)If you have any questions please contact us for help..
£155.94
Ex Tax:£129.95
Out Of Stock
Model: Fiat 125,125,126,127,128,131,132,Uno,Panda,850
This is a white plastic joint with female thread at one end and ball joint fitting to secure to a linkageLength 36mmto fit:Fiat 124Fiat 125Fiat 126Fiat 127 & 128Fiat 131 & 132Fiat 850Classic Fiat PandaFiat UnoIf you have any questions ..
£5.40
Ex Tax:£4.50
Out Of Stock
Model: Classic Fiat 500,600,850,1100 various models
Brand New Old Stockto fit:Classic Fiat 500 AbarthFiat 600 AbarthFiat 1100 (103)Lancia AppiaAlfa Romeo GiuliettaIf you have any questions please contact us for help ..
£309.47
Ex Tax:£257.89
Out Of Stock
Model: Classic Fiat 500 & 126 (with WEBER 28 IMB fitted)
Brand NewThis is the top cover for the carburettor with the brass fuel inlet and fuel outlet pipesto fit:Classic Fiat 500 (with WEBER 28 IMB carb fitted)Fiat 126 650cc (with WEBER 28 IMB carb fitted)If you have any questions please contact us for help..
£29.94
Ex Tax:£24.95
Out Of Stock
Model: Fiat 126 BIS all models
Genuine Fiat PartTop Rubber Carburettor Seal (no 3 in diagram)to Fit:Fiat 126 BIS all models If you have any questions please contact us for help..
£21.41
Ex Tax:£17.84