Classic Fiat 126 Parts

Made in  ItalyThis is a Kit of 5 Aluminium Push Rod Tubes with Springs to keep them nice and tightto fit:Classic Fiat 500 all modelsFiat 126 all air cooled models (NOT Panda 30)If you have any questions please contact us for help..

Made in ItalyThese Spacers are 20mm thickSupplied with Bolts & Washer to fitto fit:Classic Fiat 500 all models (except Giardiniera)Fiat 126 early models 594ccIf you have any questions please contact us for help..

This U shaped Clip is used to join the Window Trim ends together at the rear part of the door so they appear to be one continuous trimAs a guide you would need TWO (2) per doorto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all models (up to 1999)Fiat 600 all models ..

This is a plastic headed screw used to secure the Lamp/Lens on many early Italian CarsTotal Length 33mmIf you have any questions please feel free to ask..

This is a plastic headed screw used to secure the Lamp/Lens on many early Italian CarsTotal Length 51mmIf you have any questions please feel free to ask..

This is a Ballast Resistor to fit in the electrical circuit of the car if the Distributor is getting too hot1.6ohmCan be fit to any application and wiring is recommended by a qualified auto electrician..

Course Thread Banjo Bolt Supplied with TWO Copper Washers to fit many different Italian cars..

Battery Isolator Switch100 AMPThis Switch can be fitted anywhere inside or outside of the car and is used to disconnect the Battery andavoid it from being drained for any reasonEspecially useful for classic cars if they are not driven very oftenIf you have any qu..

Original QualityMade by GLYCO+/- 0.50mm second Over/Under SizeFiat Part No: 987009/Kitto fit:Classic FIAT 500 all modelsFiat 126 all modelsIf you have any queries or questions please feel free to ask..

Original Quality+/- 0.75mm second Over/Under Sizeto fit:Classic FIAT 500 all modelsFiat 126 all modelsIf you have any queries or questions please feel free to ask..

Black 'Snooker Ball' Plastic screw-on Gear Knobto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all models (up to 1999)If you have any questions please feel free to ask..

Black Abarth Scorpion Decal Sticker (Large)To stick onto glass or bodywork this is a die cut Scorpion Dimmensions:  210mm x 215mm If you have any questions please contact us for help ..

Black Abarth Scorpion Decal Sticker (Small)To stick onto glass or bodywork this is a die cut ScorpionDimmensions:  90mm x 85mmIf you have any questions please contact us for help..

This kit is for an Inner and Outer Window Trim SurroundSupplied with all the Clips to fit ONE DOORFinished in Black AluminiumKit consists of:1x Outer Trim (inc black fabric weatherstrip)1x Inner Trim (inc black fabric weatherstrip)all x Clipsto fit:Fiat 126 ..

This Spacer fits behind the Inner Door Handle to cover the hole and make it look neat and tidyMade in Black Plasticto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all modelsIf you have any queries or questions please feel free to ask..

Black Plastic screw-on Gear Knob to fit:Classic Fiat 500 all models (up to 1974)Fiat 126 early models If you have any questions please feel free to ask..

Beautiful Black Leather Gear Knob has the Abarth Scorpion BadgeFixed to the Gear Lever with Grub Screws and Supplied with all Fittingsto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all modelsFiat 600 all modelsFiat 850 all modelsIf you have any ..

150mm x 95mmMounting Holes Centre to Centre 75mmMade in Metal with a Two Bolt fixingTo Fit:Fiat 500,Fiat 126,Fiat 127,Fiat 128plus others..

Outer Door Handle KitFinished in BlackKit consist of:1x Left Outer Door Handle1x Right Outer Door Handle2x Keysto fit:Fiat 126 all models..

This kit comprises of one piece of Black Plastic Trim to fit along the roof line, you will need to fit and cut as appropriateThis Kit will be enough for both sidesSupplied with four new Screws to attach at each endto fit:Classic Fiat 500 all models (excluding GIARDINIERA)..