Rear Axle

This is the old fashioned Castle Slotted Type Nut that requires locking with a split pin through the hubto fit:Classic Fiat 500 all early models  (from 1957 to 1969)Fiat 600Fiat 850If you have any questions or queries please contact our office for help..

Brand NewMade in ItalyLength [mm]426 mmWeight [g]1250 gFitting PositionRear Axle left and rightFront Axle left and rightDiameter 2 [mm]25 mmNumber of Teeth22to fit:Classic Fiat 500 D/F/L/R/G  (from 1959/60)Autobianchi Bianchina all late models (..

This is a 19mm Drive Shaft to fit:Classic Fiat 500 all models..

Drive Shaft Clip(for 17mm Drive Shaft)to fit:Classic Fiat 500 N EARLY MODELSIf you have any questions or queries please contact our office for help..

Drive Shaft Clip(for 19mm Drive Shaft)to fit:Classic Fiat 500 N,D,F early modelsIf you have any questions or queries please contact our office for help..

Drive Shaft Clip(for 24mm Drive Shaft)to fit:Classic Fiat 500 F/L & R all models (from 1966 to 1974)Fiat 126 all modelsFiat 600If you have any questions or queries please contact our office for help..

This Aluminium Joint or Coupling is fitted to the Drive ShaftHas Rubber inside and Splined in the middle to mate with the Drive ShaftDimmensions:Circumference 22cmDepth 5cmDiameter 7cmto fit:Classic Fiat 500 N/DIf you have any questions please fe..

This Aluminium Joint or Coupling is fitted to the Drive ShaftHas Rubber inside and Splined in the middle to mate with the Drive ShaftDimmensions:Circumference 22cmDepth 5cmDiameter 7cmto fit:Classic Fiat 500 DIf you have any questions please feel ..

Brand NewOE QualityMade in ItalyAluminium with rubber damper inside, very common to breakDimmensions:Circumference 26cmDepth 4.5cmDiameter 8cmto fit:Classic Fiat 500 F/L/R/G (1966 to 1973)Fiat 126 all modelsFiat 600 all models..

OE QualityMade in ItalyAluminium with rubber damper inside, very common to breakSupplied with4x Bolts & Spring Washers RIC-9421x Rear Hub Nut-RIC-684Dimmensions:Circumference 26cmDepth 4.5cmDiameter 8cmto fit:Classic Fiat 500 F/L/R/G (..

This is a retaining lock plate that is fitted to the original early Drive Shaft Coupling.The coupling that we sell part no RIC-684 does not require this lock plateto fit:Classic Fiat 500 F/L/R early models..

Set of FOUR Bolts & Spring Washers to fit the drive shaft coupling and flangeFiat Part No: 16044121to fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600If you have any queries or questions please contact our office for help..

New Old StockThis is a kit of a 3 bolt drive shaft flange and aluminium couplingDiameter 60mmNumbers 10 & 14 in the diagramto fit:Classic Fiat 500 Nuova series 1 (1957)..

Brand New Old StockDiameter 60mmBolts centre to centre 40mmto fit 17mm diameter  Drive Shaftto fit:Classic Fiat 500N with 17mm Drive Shafts on first series modelsIf you have any questions please contact us for help..

OE Quality PartsMade in ItalyDiameter of Shaft 19mmThis kit consists of,2x Drive Shafts(19mm diameter)2x Drive Shaft Flange2x Shaft End Springs2x Clips2x Inner Boots2x Outer Bootsto fit:Classic Fiat 500 N,D,F models (up to 1968)Ther..

OE Quality PartsMade in ItalyLargest Diameter available 24/25mm (this measurement can vary between 22mm and 25mm)This kit consists of,2x Drive Shafts(24/25mm diameter)2x Drive Shaft Flange2x Shaft End Springs2x Clips2x Inner Boots2x Outer Bootst..

Brand NewThis is a new improved high quality modified Drive Shaft KitThe Metal Flanges have been modified and reinforced so they are much stronger than the original as they can be prone to breaking. These are four bolt fitting so double check the fitting of your old flanges.Largest ..

These Metal Nuts are not threaded but lock onto the end of the Drive Shaft inside the Gearbox to lock in to placeThere are TWO Nuts per Drive ShaftSold as a PAIR (2)to fit:Classic Fiat 500 all models N/D/F/L/R/GFiat 126 all modelsIf you have any questions please con..

This small Spring is located at the wheel end of each drive shaft to keep the tension and stop any knocking(for earlier thinner type 17 & 19mm Drive Shaft)to fit:Classic Fiat 500 D/F  (up to 1970)If you have any queries or questions please contact our office for h..

This small Spring is located at the wheel end of each drive shaft to keep the tension and stop any knocking(for later larger type 24mm Drive Shaft)to fit:Classic Fiat 500 F/L & R (up to 1974)Fiat 126 all modelsIf you have any queries or questions please contact our..