Mechanical & Engine Parts

This is a hardened bolt and locking washer for the front main bearingto fit:Classic Fiat 500 all modelsFiat 126 all models..

Set of SIX Bolts and Spring Washers to attach the Front Main Crank Bearing to fit:Classic Fiat 500 N/D/F/L/R & Giardiniera all modelsFiat 126 all models If you have any questions please contact us for help..

Best Quality AvailableMade In ITALYMade in Hardened Steel for Strength and suitable for tuned enginesThis Bearing will require machining to the appropriate size required according to your crankshaftto fit:Classic Fiat 500 all modelsFiat 126 all models..

Reconditioned Original Front Oil Pump/Timing Chain CoverIncluding Brand New Oil Pump,Oil Seal & GasketFitted at the Front of the Engine (see diagram)to fit:Classic Fiat 500 (650cc)Fiat 126 (Air Cooled ONLY)If you have any questions please contact us for hel..

Hardened Chrome Plated MetalSize 12mm Hex/Alan,Allen KeyFits many Fiat, Alfa Romeo and Lancia modelsIf you have any queries or questions please feel free to ask..

High-strength general threadlocker for maximum efficacyKey FeaturesHigh-strength general threadlocker for maximum efficacy Prevents loosening on vibrating assemblies e.g. pumps, gear boxes or presses Works on all metals, including passive substrates (e.g. stainless steel, aluminium, p..

Brand NewMade in ItalyThis is an Inlet Manifold to fit a Fiat Panda 30 Carburettor to a Panda 30 Cylinder Headto fit:Classic Fiat 500 N/D/F/L/R all modelsFiat 126 all air cooled modelsIf you have any questions please contact us for help..

Original QualityOVERSIZED 34mmSingle GrooveLength: 115.000 mm Material: Chrome-silicon-steel Supplementary Article/Supplementary Info 2: Valve stem tip hardened Valve Head Diameter: 34.000 mm Valve Seat Angle: 45 ° Valve stem diameter: 8.000 mmto fit:Clas..

Original Qualitymade in ItalySingle GrooveLength: 115.000 mm Material: Chrome-silicon-steel Supplementary Article/Supplementary Info 2: Valve stem tip hardened Valve Head Diameter: 32.000 mm Valve Seat Angle: 45 ° Valve stem diameter: 8.000 mmSold as a PAIR (2) of..

Original Qualitymade in ItalySupplied as a PAIR (2) of Inlet ValvesSingle GrooveLength: 115.500 mm Material: Chrome-silicon-steel Supplementary Article/Supplementary Info 2: Valve stem tip hardened Valve Head Diameter: 33.000 mm Valve Seat Angle: 45 ° Valve ste..

Original Qualitymade in ItalyThis is for a PAIR (2) of INLET Valve for Fiat Panda 30 Cylinder Head which is often used on the Fiat 500 and 126Three GrooveLength: 115.500 mm Material: Chrome-nickel-magnesium-steel Valve Head Diameter: 34.5.000 mm Valve Seat Angle: ..

A premium quality, high melting point, multi-purpose grease with EP additivesKey Features A premium quality, high melting point, multi-purpose grease with EP additives For use in all roller type, anti-friction and plain bearings subjected to high load conditions For use in all rol..

Metal Oil Drain Plug that screws into the bottom of the Engine & Gearbox casingHas a magnet to collect any metal debrisM22 x 1.5mmto fit:Classic Fiat 500 all modelsFiat 126 air cooled all modelsNOT CORRECT FOR ALLOY SUMPSIf you have any questions plea..

Second HandGood Conditionto fit:Classic Fiat 500 all modelsFiat 126 air cooled all modelsIf you have any questions please contact us for help..

This Cap has a sprung loaded plastic circular disc at the end of the stem on the insideMetal Finishto fit:Classic Fiat 500 D/F/L/R (up to 1974)  Not for GiardinieraFiat 126 all models (up to 1999)If you have any queries or questions please feel free to ask..

This Gauze Vapour Filter fits inside the Rocker Cover underneath the Oil Filler Cap to fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all air cooled models (up to 1987) If you have any questions please feel free to ask..

Genuine Fiat PartThis Metal Spacer fits on the flange of the Oil Pick-Up (see diagram)Fiat Part No: 996354to fit:Classic Fiat 500 all modelsFiat 126 all  modelsIf you have any questions please contact us for help..

This Rubber Seal is fitted at the flange end of the Oil Pickup (see diagram)to fit:Classic Fiat 500 all modelsFiat 126 all Air Cooled modelsIf you have any questions please contact us for help..

This Rubber Seal is fitted on the pick up end of the Oil Pickup in the sump (see diagram)to fit:Classic Fiat 500 all modelsFiat 126 all Air Cooled modelsIf you have any questions please contact us for help..

This is a kit including1x  Oil Pressure Sender Unit1x  Oil Pressure Light Switch2x  Copper WasherThese are used if you have a modified engine and an uprated speedo with an Oil Pressure Gauge and a Warning Lightto fit:Classic Fiat 500 all modelsFiat 126 Air Cool..