Mechanical & Engine Parts

This kit consists of1x Abarth Aluminium Rocker Cover1x Gasket1x Abarth Screw On Aluminium Oil Cap1x St Steel Braided Hoseall x Racing Spec Aluminium ConnectionsThe Breather connects to the Fuel Pump outlet on the side of the engine so that the vented oil is recircul..

Made in ItalyBlack Anodised Alluminium Sumpsupplied with1x Gasketall fittingsto fit:Classic Fiat 500 N/D/F/L/RFiat 126 air cooled..

This is a set of FIVE Aluminium Spring Loaded Push Rod TubesSupplied with new Rubber SealsLength 4x 95mm, 1x 100mmto fit:Classic Fiat 500 (with Panda 30 conversion)Fiat 126 (with Panda 30 conversion)Classic Fiat Panda 30If you  have any questions please contact us for help..

Original Quality+/- 1.00mm second Over/Under Sizeto fit:Classic FIAT 500 all modelsFiat 126 all modelsIf you have any queries or questions please feel free to ask..

Brand New Crankshaft as standardto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all modelsIf you have any questions please contact us..

Brand NewGenuine Boxed PartThis is a New Cylinder Head without any valves, springs etc so just bare headto fit:Classic Fiat 500 (with 650cc Engine fitted)Fiat 126 650cc all modelsIf you have any questions please contact us for help..

Genuine Fiat HeadBrand New Cylinder Head complete and ready to install on the car with all the valves, springs etcSupplied with a Copper Head Gasket and other related gasketsto fit:Fiat 126 BIS all modelsIf you have any questions please contact us for help..

Brand NewThese are genuine fiat old stock boxed partsto fit:Fiat 126 BIS all models..

Genuine Fiat Old Stock to fit:Fiat 126 BIS all modelsIf you have any questions please contact us for help..

Brand NewGenuine Partsto fit:Fiat 126 BIS all modelsIf you have any questions please ask for help..

Genuine Fiat PartFits behind the Timing ChainFiat Part No: 4049811to fit:Classic Fiat 500 all modelsFiat 126 all air cooled modelsIf you have any questions please contact us for help..

A very neat kit that is fitted to the bottom of the engine between the crankcase and the sump  and houses the Oil FilterThis Oil Cooler Kit consists of,1x Alloy Engine Mounting Plate1x  Alloy Oil Cooler1x  Spin-on Oil Filter2x  Braided Hoses & Fittings1x  Oil Pump A..

Oil Pick UpThis part sits in the sump and sucks the oil up to lubricate the engineFiat Part No: 4289534to fit:Classic Fiat 500 all modelsFiat 126 all models..

This is for TWO SeatOUTER DIAMETER: 30.29 mmTHICKNESS: 6.43 mmINNER DIAMETER: 23.81 mmMACHINING: SemiWEIGHT: 14gLENGTH: 10mmHEIGHT: 30mmWIDTH: 30mmFUNCTION: Valve SeatTYPE: Valve Seatto fit:Classic Fiat 500 all m odelsFiat 126 all models..

This is a Genuine Fiat Crankshaft that's been professionally Vapour Blasted inside and out, Ground,Polished and cleaned and is ready to installwith new OE Quality Italian bearingsThis kit consists of1x  Crankshaft1x  Front Main Bearing1x  Rear Main Bearing1x  Set Bearin..

This is a complete Cylinder Head reconditioned by professionals to a very high standardWork completed includes,Skimming All threads Checked and repaired if necessary Vapour Blasting New Valve Guides, Seals, Original Valves & Springs fitted Re-Cutting Inlet Valve Seats L..

This is a complete Cylinder Head reconditioned by professionals to a very high standardThis head Includes Larger Uprated Inlet Valve (34mm) & Exhaust Valves (30mm)Work completed includes,Vapour Blasting Skimming All threads Checked and repaired if necessary New Valve Gu..

Genuine Fiat PartNOT supplied with an Adjuster Screw (available separately)Takes 7mm x1 Size ScrewFiat Part No: 4137985to fit:Classic Fiat 500 all modelsFiat 126 all modelsIf you have any questions please contact us for help..

This is a second hand cylinder head in good conditionThis is a high compression twin port head and is used to tune 500 & 126 enginesto fit:Classic Fiat 500Fiat 126 air cooled..

Second Hand Good ConditionThis is a rare item that's used to blank the fuel pump hole in the eventuality that you fit an electric fuel pumpIts also used as a crank breather and can connect to a rocker cover a catch can or simply run down to the roadSupplied with a Gasket and Studs/Nutsto fit:Cl..