Classic Fiat 126 Parts

Made in ItalyThis shaped metal cover fits underneath the Engine to cover the flywheel and protect it from any dirt or debris from getting inSupplied with new Bolts and Washers to fitto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all models (NOT 126 BIS)I..

Brand NewMade in ItalyThis is a kit of THREE Lock Tab Washers & SIX Bolts to secure the Flywheelto fit:Classic Fiat 500 all modelsFiat 126 all modelsIf you have any questions please contact us for help..

Brand NewGenuine Fiat PartFiat Part No: 7663860 (no 11 in diagram)to fit:Classic Fiat 500 R all modelsFiat 126 all modelsIf you have any questions please contact us for help..

Front Windscreen & Rear Screen Rubber Seal for Chrome InsertChrome Insert & Joining Clips also supplied These Seals are for the early Fiat 126 from the early 1970's up to 1978 (Italian Made) to fit:Fiat 126 early (pre 1978) If you have any quest..

Brand NewAdjustable Abarth Strut/Stabilizer Bar/BraceFerrari Red Powder Coated FinishTo fit Front of the carto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all modelsIf you have any questions please conatct us..

This is a specifically shaped foam padding for the back part of the front seatIt has a lined backing to slide over the metal seat frameto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 594cc early models (up to 1978)Fiat 600 all modelsIf you have any ques..

Made in ItalyThis Rubber Bonnet Seal fits around the aperture of the front BonnetComes as a Rubber Seal perfectly cut to sizeto fit:Fiat 126 all modelsIf you have any questions or queries please feel free to ask..

This is a specifically shaped foam padding for the bottom part of the front seat which takes your weightto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 594cc early models (up to 1978)If you have any questions please feel free to ask for help..

This Rubber Bump Stop has a threaded bolt to attachto fit:Classic Fiat 500 all Models D/N/F/L/R/GFiat 126 all modelsIf you have any questions please contact us for help..

Pair of Front Camber Adjustment Brackets30mm AdjustmentDistance between the holes is 10.5cmThese Brackets are designed to raise the front Suspension Arms which will give 30mm more Camber at the front of the car They are a simple 2 Bolt fit, no welding or other modificati..

This is a set of 6 Bolts & Washers to attach the Aluminium Crank Pulley Cover that houses the Oil Pump & Filter Fiat Part No: 13823621 to fit:Classic Fiat 500 all modelsFiat 126 all air cooled models If you have any questions please contact us for help..

Genuine Fiat PartFits behind the Timing Chainto fit:Classic Fiat 500 all modelsFiat 126 all air cooled modelsIf you have any questions please contact us for help..

Original QualityMade by CORTECO in Italyto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 594cc & 650cc (up to 1999)(NOT for Water Cooled BIS VERSION)If you have any questions please feel free to contact us..

Original QualityMade by CORTECO in Italy Fiat Part No:  7632453 to fit:Fiat 126 704cc BIS (up to 1992)  If you have any questions please feel free to contact us..

Front Panel 'Fiat' Badge in Black with White PrintHas TWO pins at the rear to locate into two holesSupplied with metal clips to fitto fit:Classic Fiat 500 R all modelsFiat 126 Early modelsIf you have any questions please cntact us for helpIf you have any q..

Front Grease Cap fits on the Front Hub and acts as a dust & dirt shieldto fit:Fiat 126 all models (650cc & 704cc)Fiat 600 all modelsFiat 850 all modelsFiat 124 all modelsFiat 127 all modelsFiat 128 all modelsIf you have any questions please contact us for h..

This Lock Washer fits behind the Front Hub Nut that screws onto the Stub Axle to fit:Fiat 126 all models (up to 1999) If you have any questions or queries please contact our office for help..

This is the Front Hub Sealto fit:Classic Fiat 500 Giardiniera all modelsFiat 126 652cc & 704cc all models (from 1979 to 1999)Fiat 850 Saloon & Special (from 1964 to 1972)Fiat 900 T/E all models (from 1978 to 1986)If you have any questions please feel f..

DISCLAIMERPLEASE BE AWARE THAT THIS IS A RETRO-FIT ITEM WHICH COMES WITH NO CERTIFICATIONS. IT IS IMPERATIVE THAT THIS PRODUCT IS FITTED BY A QUALIFIED MECHANICAL ENGINEER WHO UNDERSTANDS RETRO-FITTING TO ENSURE IT IS FITTED CORRECTLY AND SAFELY.IIIWhile the Front Leaf Spring can..

DISCLAIMERPLEASE BE AWARE THAT THIS IS A RETRO-FIT ITEM WHICH COMES WITH NO CERTIFICATIONS. IT IS IMPERATIVE THAT THIS PRODUCT IS FITTED BY A QUALIFIED MECHANICAL ENGINEER WHO UNDERSTANDS RETRO-FITTING TO ENSURE IT IS FITTED CORRECTLY AND SAFELY.IIIWhile the Front Leaf Spring can..