Classic Fiat 126 Parts

Pair of Fuel Tank Strap GasketsMade in CorkThese Cork Gaskets fit under the Tank Strapsto fit:Classic Fiat 500 D/F/L/R/G (with Large Petrol Tank)If you have any questions please contact us for help..

This Rubber Bush is fitted on the Fuel Hose from the Pump to Carburetor and fits inside the metal bracket to support itFiat Part No: 996623to fit:Classic Fiat 500 all modelsFiat 126 air cooled all modelsIf you have an questions please contact us for help..

Good Quality Original Equipmentmade by BCD in Italyto fit:Fiat 126 Bis 704cc Water Cooled (from 1976)Comes with ONE GasketIf you have queries or questions please feel free to ask..

This Hardened metal push rod operates the Fuel Pump by the rotation of the engineto fit:Fiat 126 704cc Bis Water Cooled (from 1986)..

This part fits between the Engine and the Fuel Pump, and is fitted with a Gasket at either side Dimmensions: 20mm Thickness Fiat Part No: 7541254 to fit:Fiat 126 704cc Bis Water Cooled..

This Stud is used to attach the Fuel Pump to the EngineTWO required in total for one engine  (8mm x 1.25 x 54) to fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600 all modelsFiat 850 all modelsFiat 900T/E If you have any quest..

Genuine Fiat PartThis is a metal Pipe that connects to the Rear Wing to fill up the tank with fuelThis Pipe has a Breather hose with two other outlets,  please check it yours is compatibleFiat Part No: 46577448to fit:Fiat 126 all models (from 1986 on)If  you have any questions please conta..

Genuine Fiat PartThis is a metal Pipe that connects to the Rear Wing to fill up the tank with fuelThis Pipe has a Breather hose with one other outlet,  please check it yours is compatibleFiat Part No: 46577020to fit:Fiat 126 all models (from 1986 on)If  you have any questions please contac..

This Unit fits into the Fuel Tank and has a float attached to guage the fuel levelHas TWO Pins as the 126 has a Fuel Warning Light and GuageComes with a new Rubber Sealto fit:Fiat 126 all models (from 1974 to 1993)If you have any queries or questions please fe..

Fully Reconditioned Steering Boxfor Left Hand Drive Cars onlyPLEASE NOTE: The Shaft has 17 Splines on the Shaft where it meets the Steering Shaft inside the carto fit:Classic Fiat 500R & 126 all modelsPLEASE NOTE: This is a reconditioned part so we would need your old St..

Black Plastic Fuse Box with CoverLocated at the front under the bonnetto fit:Classic Fiat 500 F,L,R,G all models (from 1969 on)Fiat 126 early air cooled models (up to 1979)If you have any queries or questions please feel free to ask..

Brand NewGenuine Fiat PartFiat Part No: 7561453Takes 8 Bullet Fusesto fit:Fiat 126 all models (from 1979 on)If you have any questions please contact us for help..

Gear Lever, threaded at the bottom onlyFinished in Black as original(diagram is a guide only)to fit:Fiat 126 ELX,BIS all Late modelsIf you have any questions please contact us for help..

This Black Cover is for the Gear LeverVery easy to fit, remove the Centre Console and place Cover over the Gear Lever and tighted the black string to secureOnce you replace the Centre Console it will hide the baseto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 early ..

This Red Cover is for the Gear LeverVery easy to fit, remove the Centre Console and place Cover over the Gear Lever and tighted the black string to secureOnce you replace the Centre Console it will hide the baseto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 early mod..

Made in ItalyThis black rubber boot/gaiter fits at the bottom of the gear lever to cover the hole in the floorSupplied with the metal plate with four holes to attach it to the floorto fit:Classic Fiat 500 D,F,L,R all modelsFiat 126 air cooled all early models..

This is a black metal plate with four holes to attach a rubber gear lever boot to the floor Dimmensions: 110mmx90mmScrew Hole centre to centre: 80mm x 65mmto fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600 all models..

Brand NewMade in ItalyThis plastic Bush is fitted into the tunnel transfer box below the Gear lever (see diagram no 10)to fit:Classic Fiat 500 R modelsFiat 126 all modelsFiat 600D all modelsIf you have any questions please contact us for help..

Connects the Gear Linkage assembly to the Gearbox in order to select GearsThis part has a rubber joint in the middle that after a while will perish and make itdifficult to select gearsto fit:Classic Fiat 500 all modelsFiat 126 all models..

This Rubber Bush has three metal rings on the inside and it fits intothe hole underneath the car were the Gear Linkage runs through (picture shown)to fit:Classic Fiat 500 all models (up to 1973)126 all modelsFiat 600Classic Fiat Panda 30If you need any..