Classic Fiat 126 Parts

This White plastic Clip fits into the back of the Head Lamp and clips onto the adjuster screwto fit:Fiat 126 all modelsFiat 127  Early SeriesFiat 128  Early SeriesFiat 900T/EFiat Strada/RitmoIf you have any questions please feel free to ask..

This is an Adaptor Plug Loom to convert your car to H4 Head Lamps complete with TWO RelaysMakes it very easy to adapt your Head Lamps and add a couple of Relays for safetyto fit:Fiat 126 all modelsFiat 127 early modelsFiat 128Fiat 900T/E all modelsIf you have..

This Rocker Switch fits into the dashboard pod and can be prone to burning outFiat Part No: 7535295to fit:Fiat 126 Bis (1986 to 1992) If you have any questions please feel free to ask..

This Switch fits into the dashboard pod and can be prone to burning out5 Pin (see photo) Fiat Part No: 4396582 to fit:Fiat 126 Personal (1979 to 1987) If you have any questions please feel free to ask..

Rubber Gasket for Heater Control Valve/Cockto fit;Fiat 850Fiat 124Fiat X19Fiat UnoFiat PandaPlus many moreIf you have any questions please feel free to ask..

Plastic Heater Valve Fiat Part No: 7556847 to fit:Fiat 126 704cc Bis (up to 1991) If you have any questions please fel free to ask..

This flexible Hose fits at the front of the car to direct the hot air into the cabinThere are FOUR altogether, TWO under the dashboard and TWO under the bonnetMade in Insulated Foil Backed Cardboard as original to fit:Classic Fiat 500 all modelsFiat 126&..

Brand NewGenuine Fiat PartFiat Part No: 7535874 (no 22 in the diagram)to fit:Fia 126 If you have any questions please contact us for help..

Hot Air Transfer Tube(If you have a 650cc engine fitted to a classic Fiat 500 then you need this Heat Tubeto join from the Thermostat Housing to the Tunnel)to fit:Classic Fiat 500 all models (with 650cc Engine fitted)Fiat 126  594cc & 650cc all modelsIf you hav..

Original Magnetti Marelli PartResistance Rated OHMS 3.0Fits many different models including,Classic Fiat 500 all modelsAutobianchi Bianchina all modelsClassic Fiat PandaFiat UnoFiat Strada/RitmoFiat 124 & 125Fiat 126,Fiat 127 & 128,Fiat 131 & 13..

This Spring is fitted inside the Distributor  and controls the bob weights thatoperate the contact pointsThis is supplied as ONE Spring (there are two springs inside the distributor)to fit:Classic Fiat 500 all modelsFiat 126 all modelsIf you have any questions ..

This Ignition Kit consists of the following parts1x  Set Ignition Leads (with protective sheath, locating grommets & Cap Cover)  (RIC-503)1x  Distributor Cap (RIC-978)1x  Set Points (RIC-980)1x  Condenser (RIC-6164)1x  Rotor Arm (RIC-976)2x  Spark Plug (RIC-874)All Good Q..

Original QualityOVERSIZED 34mmSingle GrooveLength: 115.000 mm Material: Chrome-silicon-steel Supplementary Article/Supplementary Info 2: Valve stem tip hardened Valve Head Diameter: 34.000 mm Valve Seat Angle: 45 ° Valve stem diameter: 8.000 mmto fit:Clas..

Original Qualitymade in ItalySingle GrooveLength: 115.000 mm Material: Chrome-silicon-steel Supplementary Article/Supplementary Info 2: Valve stem tip hardened Valve Head Diameter: 32.000 mm Valve Seat Angle: 45 ° Valve stem diameter: 8.000 mmSold as a PAIR (2) of..

Quality RubberMade in ItalyThis Boot fits on the inside of the Drive Shaft where it connects to the GearboxIt has an internal Oil Seal to stop the oil leaking and a Plastic Bush to fit onto the ShaftDiameter: 22-24mm (larger type shaft)to fit:Classic Fiat 500 F..

Quality Rubbermade in ItalyThis Boot fits on the inside of the Drive Shaft where it connects to the GearboxIt has an internal Oil Seal to stop the oil leaking and a Metal Bush to fit onto the ShaftDiameter: 22-24mm (larger type shaft)to fit:Classic Fiat 500 F/L..

OE Quality Partmade in ItalyInner Track Rod EndSuppled with a new Nut Fitting Position inner Left Right ..

Input Shaft Seal/Bush HousingSupplied with New Oil Seal & Brass Bushto fit:Classic Fiat 500 F/L/R all modelsFiat 126 all modelsIf you have any questions please contact us for help..

Brand NewGenuine Fiat ItemThis is the switch that operates the interior light once the door is openedto fit:Fiat 126 all modelsIf you have any questions please contact us for help..

Finished in Grey Cloth as originalMade and shaped to fit perfectlyIf your car has a sunroof then you will need to cut and trim to sizeto fit:Fiat 126 all water cooled models (bis)If you have any questions please feel free to ask ..