%20[LIMITED%20to%20500px]-640x560w.jpg "Fiat 238,241,242")
Refine search
Model: Various Models
Beautiful Quality Chrome MirrorCentre to Centre of fitting bolts 87mmTwo Bolt Fitting, supplied with Screws and Rubber Sealto fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600 all modelsFiat 850 all modelsFiat 124 Spider,CoupePlus Many More Mode..
£39.95
Ex Tax:£39.95
Model: Classic Fiat 500, 600, 850 plus many more
This beautiful round flat shaped Chrome Mirror clips onto the front of the doorIt comes with Rubber Seals & Grub Screws to fitThis Mirror is not sided so will fit on either or both sides of the vehicle and is fully adjustable for both sidesto fit:Classic Fiat 500 F/L/RF..
£39.95
Ex Tax:£39.95
Model: Classic Fiat 500, 600, 850 plus many more
This beautiful round flat shaped Chrome Mirror clips onto the front of the doorIt comes with Rubber Seals & Grub Screws to fitThis Mirror is not sided so will fit on either or both sides of the vehicle and is fully adjustable for both sidesto fit:Classic Fiat 500 F/L/RF..
£34.95
Ex Tax:£34.95
Model: Classic Fiat 500, 126, 600, 850 plus others
This Soft Grip Tool comes with 5 different size eyelets for various size of TrimUsed to insert the Chrome Screen Insert into the Rubber Screen Sealon many model of Classic CarIf you have any questions please contact us for help..
£16.95
Ex Tax:£16.95
Model: Fiat 600 & Multipla all models
Clutch Forkto fit:Fiat 600 & Multipla all modelsIf you have any questions please contact us for help..
£34.95
Ex Tax:£34.95
Model: Fiat 600 all models
Wire Clip to hold the Clutch Release Bearing in positionFiat Part No: 878848to fit:Fiat 600 all modelsIf you have any questions please contact us for help..
£9.95
Ex Tax:£9.95
Model: Fiat & Lancia many models
OE QualityMade in ItalyRubber Seal to fit onto DipstickDimmensions:Length 47mmFits many different models including:Classic Fiat 500 R 594cc126 all models600,850,900,133,124,125,127,128,131,132Strada/Ritmo, RegataPanda, Uno all modelsCinquece..
£0.95
Ex Tax:£0.95
Model: 633cc all models (Marelli)
Brand New Old Stock Original Partto fit:Fiat 600 Series 1 633cc (up to 1959) all modelsFiat 600 Multipla early models(with Magnetti Marelli Distributor)If you have any queries or questions please feel free to ask..
£39.95
Ex Tax:£39.95
Model: Classic Fiat 500,126 & 600 all models
This Stainless Steel Bolt screws into the sides of the Distributor body to attach the metal spring clips to hold the Distribtor Cap in placeSupplied as ONE BoltFiat Part No: 9910387to fit:Classic Fiat 500 all modelsFiat 126 all models (exc BIS)Fiat 600 all models
..
£1.95
Ex Tax:£1.95
Model: Classic Fiat 500,126 & 600 all models
These Stainless Steel Bolts screw into the sides of the Distributor body and attach the metal spring clips to hold the Distribtor Cap in placeSupplied as a kit of TWO Stainless Steel Boltsto fit:Classic Fiat 500 all modelsFiat 126 all models (exc BIS)Fiat 600 all models..
£7.95
Ex Tax:£7.95
Model: all models
This rubber pad or grommet fits around the Door aperture on the top and bottomThere are TWO per Doorto fit:Classic Fiat 500 all models..
£0.75
Ex Tax:£0.75
Model: Fiat Classic 500,126, plus many others
This is the Dry Type standard Coil (NOT Oil Filled Type)This is an alternative and direct replacement to the standard Coil and works better in a hot engine bayResistance 1.75 ohm15 = POSITIVE1= NEGATIVEFits many different models including:Fiat 500 all models
..
£34.95
Ex Tax:£34.95
Model: 499cc and 594cc
This rubber Boot fits onto the cable and over the Dynamo terminal to protect and insulate itThere are two options to choose SMALL or LARGEto fit:Classic Fiat 500 all models (up to 1973)Fiat 126 594cc early models with Dynamo (up to 1976)Dimmensions:Total Length: 45m..
£1.95
Ex Tax:£1.95
Model: Classic Fiat 500,126 & 600 all models
Non Adjustable Electronic Type Voltage RegulatorThis part fits to the rear Bulkhead of vehicle and connects to the DynamoFitted to an Aluminium plate for coolingto fit:Classic Fiat 500 all models (with Dynamo)Fiat 126 all early models up to 1978 (with Dynamo)Fi..
£31.95
Ex Tax:£31.95
Model: all models
These Grommets fit either side of the aperture of the rear Engine Lid to make the opening and closingsmoother and keep the gaps consistentto fit:Classic Fiat 500 all models (NOT Giardiniera)If you have any questions or queries please feel free to ask..
£1.95
Ex Tax:£1.95
Model: Fiat 600 & 850 all models
Top Rubber Mounting Bushto fit:Fiat 600 all modelsFiat 850 all modelsIf you have any questions please contact us for help..
£11.95
Ex Tax:£11.95
Model: all models
This Brass Nut is used to attach the Exhaust to the Manifold(8mm x 1.25 x 8)to fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600 all modelsFiat 850 all modelsFiat 900T/EIf you have any questions or queries please contact our office for help..
£1.00
Ex Tax:£1.00
Model: Fiat ,Lancia,Alfa Romeo, Autobianchi various models
This is a metal stud with these dimmensionsTotal Length 41mmThread 16mmShoulder 9mmThread 16mmThread Size M8to fit:Fiat Various modelsLancia Various modelsAlfa Romeo Various modelsAutobianchi Various modelsIf you have any questions please contac..
£0.95
Ex Tax:£0.95
Model: Fiat ,Lancia,Alfa Romeo, Autobianchi various models
This is a metal stud with these dimmensionsTotal Length 37mmThread 20mmShoulder 7mmThread 10mmThread Size M8to fit:Fiat Various modelsLancia Various modelsAlfa Romeo Various modelsAutobianchi Various modelsIf you have any questions please contac..
£1.50
Ex Tax:£1.50
Model: Fiat ,Lancia,Alfa Romeo, Autobianchi various models
This is a metal stud with these dimmensionsTotal Length 47mmThread 23mmShoulder 9mmThread 15mmThread Size M8to fit:Fiat Various modelsLancia Various modelsAlfa Romeo Various modelsAutobianchi Various modelsIf you have any questions please contac..
£0.95
Ex Tax:£0.95