Classic Fiat Multipla

Original Qualitymade by COFAP 60.0 mm Standard Size  For 633cc Engines(Complete Set of 4 Rings per Piston,16 in total) to fit:Fiat 600 early all models with 633cc Engine  If you have any queries or questions please feel free to ask..

Original Qualitymade by COFAP 62.0 mm Standard Size  For 767cc Engines to fit:Fiat 600D all models with 767cc Engine  If you have any queries or questions please feel free to ask..

Rubber Bush to fit onto the top and bottom of the Shock Absorber and are mostcommonly fitted to the Rear Shock Absorbers on the classic Fiat 500 and 126Dimmension:Outer Diameter 38mm, Inner 14mm, Thickness 11mmto fit:Classic Fiat 500 all models (up..

Installation, Maintenance and Setup of these SU CarburettorsThis Manual gives information on Tuning, Maintenance and Service on the following SOLEX CarbsC32 PAIA-732 PAIA-444 PHHPlus many others..

NOS (New Old Stock)Zero MPHGenuine VEGLIA BORLETTIto fit:Fiat 600 all modelsFiat 600 Multipla all models..

This rubber Boot fits onto the cable and over the Starter Motor terminal or any electrical terminal to protect and insulate itIf you need any help please contact us..

This rubber Boot fits onto the cable and over the Starter Motor terminal or any electrical terminal to protect and insulate itIf you need any help please contact us..

Steering Box Oil Sealto fit:Classic Fiat 500 N/D models (up to 1966)Fiat 600 early suicide door models  (up to 1965)If you have any questions please contact us for help..

With this kit you can replace the Bushes and Bolt on your Steering Idler to reduce any play in the SteeringKit consists of,2x  Original Bushes (OD-29mm)1x  Bolt2x  Washers1x  Lock NutDimmensons of Bush:Inner Diameter [mm] 13Outer Diameter [mm] 29Hei..

With this kit you can replace the Bushes and Bolt on your Steering Idler to reduce any play in the SteeringKit consists of,2x  Original Bushes (OD-31mm)1x  Bolt2x  Washers1x  Lock NutDimmensons of Bush:Inner Diameter [mm] 13Outer Diameter [mm] 31Hei..

Good Quality Rubber as OriginalMade in ItalyInner Diameter at Base: 37mmDiameter of Hole in Rubber: 15mmto fit:Fiat 124Fiat 125,Fiat 131,Fiat 132,Fiat 1100,1300,1500,1800,2300Fiat 600T, 850T, 900T/EFiat DinoFiat 130Lancia FulviaLancia BetaIf you have any questions please contact us for help..

AUTOMOTOCLUB STORICO ITALIANODimensions: Length 37mm, Height 34mmSold as a pair (2)AUTOMOTOC..

Installation, Maintenance and Setup of these SU CarburettorsThis Manual gives information on Tuning, Maintenance and Service on the following CarburettorsH1H2HS2H4HS4H6HS6HD6HD8..

This is a FOUR Piece Sump Gasket Kit     to fit:Fiat 600 all modelsClassic Fiat MultiplaFiat 850 all modelsFiat 850T & 900 T/EFiat 127 903cc (up to 1986)Fiat Panda 769cc, 903cc & 965cc (up to 1992)Fiat Uno 903cc (up to 1988)  ..

This is a Deposit for your old Distributor which must be returned to usin a serviceable condition If you have any questions please contact us for help..

This is a top radiator hoseto fit:Fiat 600 & Multipla (1955 to 1971)If you have any questions please contact us with the full chassis number of the car..

This is a top radiator hoseto fit:Fiat 600 & Multipla (1955 to 1971)If you have any questions please contact us with the full chassis number of the car..

This is a complete kit of Trunnions to repair/overhaul the front Stub AxlesStandard Sizeto fit:Fiat 850T & 900T/EFiat MultiplaFiat 1100If you have any questions please feel free to ask..

This is a complete kit of Trunnions to repair/overhaul the front Stub Axles(+5) OverSizeto fit:Fiat 850T & 900T/EFiat 600 MultiplaFiat 1100If you have any questions please feel free to ask..

This is a complete kit of Trunnions to repair/overhaul the front Stub Axles(+10) OverSizeto fit:Fiat 850T & 900T/EFiat 600 MultiplaFiat 1100If you have any questions please feel free to ask..