Engine, Gearbox and Related Parts

Brand NewPlastic Air Filter Lidto fit:Classic Fiat 500 R 594cc all models (except Giardiniera)Fiat 126 all air cooledIf you have any questions please feel free to ask..

This rubber hose connects to the aluminium outlet on top of the carburettor to fit:Classic Fiat 500 D/F/L all models (up to 1972) If you have any questions please feel free to ask..

This is a Metal Lid to fit over the top of the Air Filter Housing to blank it offYou would use this if you fitted an alternative Carb or had a K & N Air Filter fittedFitted using the standard metal clips (supplied separately)to fit:Classic Fiat 500 F/L/R models except GiadinieraFiat 126 all air cool..

Abarth Alloy Rocker Cover supplied with1x Aluminium Screw on Oil Cap & Seal1x Rocker Cover Gasket2x Fibre Washers2x Longer StudsHas a Bracket attached to route the Ignition Leadsto fit:Classic Fiat 500 all models (except Giardiniera)Fiat 126 all air cooled modelsIf you have any questions please ..

Made in ItalyThis is a beautiful machined Alloy Rocker Cover without any brandingSupplied with1x Rubber Rocker Cover Gasket & Fibre Washers1x Alloy Screw on Capto fit:Classic Fiat 500 N,D,F,L,R all modelsFiat 126 Air Cooled all modelsAutobianchi Bianchina..

When you change over to an Alloy Rocker Cover on a Classic Fiat 500 or 126 the Studs are usually too short to reach, as the Alloy Covers are higherThis kit consists of2x  Longer Studs 115mm2x  St Steel Nyloc Nut2x  Fibre Washerto fit:Classic Fiat 500 N,D,F,L,R..

This is a thick paper Gasket for the Alloy Sump with a set of Alan Key Bolts to attachto fit:Classic Fiat 500 all models (except Giardiniera)Fiat 126 all air cooled modelsIf you have any questions please contact us for help..

This is a Good Quality Italian Alloy Sump5 Litre Sumpto fit:Classic Fiat 500 all models (except Giardiniera)Fiat 126 all air cooled modelsIf you have any questions please contact us for help..

This Metal Cover fits to the front of the Fan Cowing and houses the AlternatorThis item is used to upgrade the Generator from a Dynamo on a standard 500 Engine to an Alternator whichis generally more reliable and produces more powerto fit:Classic Fiat 500 all modelsFiat 126..

Made in  ItalyThis is a Kit of 5 Aluminium Push Rod Tubes with Springs to keep them nice and tightto fit:Classic Fiat 500 all modelsFiat 126 all air cooled models (NOT Panda 30)If you have any questions please contact us for help..

Gives your engine block a hard wearing protective coating, with the finish of your choiceKey FeaturesProvides a tough protective coatingDeveloped specially for engine blocks and cylinder headsDurable and hard wearing formula..

Brand New Quality PartMade in ItalyThis is a Road Sport 35/75 Profile Camshaftto fit:Classic Fiat 500 Giardiniera (estate) all modelsAutobianchi Bianchina Panoramica (estate)If you have any questions please contact us for help..

Brand NewMade by WEBER in ItalyWEBER 26OC (8M)to fit:Classic Fiat 500 GiardinieraAutobianchi Bianchina PanoramicaIf you have any questions please contact us for help..

Brand New BoxedOriginal Equipmentmade by WEBERType: WEBER 26 IMBSupplied with the top and bottom Gasketto fit:Classic Fiat 500 499cc all models (up to 1972)If you have any queries or questions please feel free to ask..

Brand New BoxedOriginal Equipmentmade by WEBERType: WEBER 28 IMBSupplied with the top and bottom Gasketto fit:Classic Fiat 126 all air cooled models (up to 1999)If you have any queries or questions please feel free to ask..

This Gasket fits between the top of the Carburettor and the aluminium 90 deg ElbowFor use with WEBER 26 IMB CarburettorFiat Part No:to fit:Classic Fiat 500 499cc all models (up to 1974)If you have any queries or questions please feel free to ask..

This Gasket fits between the Carburettor and the Bakerlight Carburettor Spacerto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all air cooled models (up to 1999)   NOT BISIf you have any queries or questions please feel free to ask..

This Gasket fits between the Cylinder Head and the Bakerlight Carburettor Spacerto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all air cooled models (up to 1999)   NOT BISIf you have any queries or questions please feel free to ask..

This Gasket fits between the top of the Carburettor and the plastic 90 deg ElbowFor use with WEBER 28 IMB Carburettorto fit:Classic Fiat 500 (with 650cc engine fitted)Fiat 126 all air cooled models (up to 1999)   NOT BISIf you have any queries or questions please f..

This is a Lower Carburettor SpindleFor WEBER 28IMB Carburetor onlyto fit:Classic Fiat 500 all models (with WEBER 28IMB fitted)Fiat 126 all Air Cooled models (with WEBER 28IMB fitted) If you have any questions please contact us for help ..