Engine, Gearbox and Related Parts

Air Horn & Compressor KitSupplied with Relay & FittingsFor any 12V car to fit:Classic Fiat 500 all modelsFiat 126 all modelsFiat 600 all modelsFiat 850 & 900T/E all modelsPlus many other models If you have any questions please contact us for help..

This is a kit of parts to convert from using a Dynamo Generator to a more stable Alternator, whichwill be more reliable and give you a better output to install a charging device or radio etcThe conversion is not too difficult but its recommended that the wiring work is undertaken by a q..

This is a set of FIVE Aluminium Spring Loaded Push Rod TubesSupplied with new Rubber SealsLength 4x 95mm, 1x 100mmto fit:Classic Fiat 500 (with Panda 30 conversion)Fiat 126 (with Panda 30 conversion)Classic Fiat Panda 30If you  have any questions please contact us for help..

Brand NewMade by WEBER Twin 30 DGF Carburettor (We can also supply an Inlet Manifold for this depending on what Engine/Cylinder Head you would like to use it with) to fit:Classic Fiat 500 (with 650cc Engine fitted)Fiat 126 all models including BIS  I..

This is a kit of aluminium flexible supports to the inlet manifoldSupplied with GasketsSize: 40mmFor WEBER Twin 40 DHLAto fit:Classic Fiat 500Fiat 126 air cooled..

Brand New Old Stockto fit:Classic Fiat 500 AbarthFiat 600 AbarthFiat 1100 (103)Lancia AppiaAlfa Romeo GiuliettaIf you have any questions please contact us for help ..

Brand NewThis is the top cover for the carburettor with the brass fuel inlet and fuel outlet pipesto fit:Classic Fiat 500 (with WEBER 28 IMB carb fitted)Fiat 126 650cc (with WEBER 28 IMB carb fitted)If you have any questions please contact us for help..

Brand NewMade in ItalyThis Copper Head Gasket is 0.6mm Thickness Piston Size 80mm (695cc) to fit:Classic Fiat 500 (with 650cc Engine)Fiat 126 650cc (all models) If you have any questions please contact us for help..

Brand NewMade in ItalyThis Copper Head Gasket is 0.6mm Thickness Piston Size 85mm (795cc) to fit:Classic Fiat 500 (with 650cc Engine)Fiat 126 650cc (all models) If you have any questions please contact us for help..

- This is a full kit of parts to convert your engine to a more modern engine management system- Get rid of your Distributor problems for good- The engine will run with a stronger more reliable spark with better fuel economy and improved pickupThis kit includes1x  Coil & Bracket1x  Engi..

This is a Giannini Aluminium Air Filter Lid with the 28mm Tapered Pipe to attach to itThe Lid has a small Giannini Badge on itto fit:Classic Fiat 500 'Giannini' all modelsFiat 126 air cooled modelsIf you have any questions please contact us for help..

New Old Stock by PAYENConsists of1x  Copper Head Gasket1x  Copper Manifold Gasket1x  Copper Exhaust Ring2x Carburettor Gasket1x  Valve Cover Gasket2x  Water Outlet Gasketto fit:Fiat Topolino B,C, SIMCA 6 (from 1948 on)If you have any questions p..

This is a Petrol Tank finished in the Italian Flag 'Tricolore' colours Beautiful Professionally Painted & Lacquered Finishto fit:Classic Fiat 500 F,L,R,G all models (from 1966 on)If you have any questions please contact us for help..

SHOP SOILED TO CLEAR(The Pulleys have have some slight signs of wear (see photo))Lightweight Alloy Pulley Kit to replace the basic metal standard onesSupplied with a larger width more modern multi-ribbed Belt which is more efficientThis kit consists of1x Large Balance..

SHOP SOILED TO CLEAR(The Pulleys have have some slight signs of wear (see photo))Lightweight Alloy Pulley Kit to replace the basic metal standard onesSupplied with a larger width more modern multi-ribbed Belt which is more efficientThis kit consists of1x Large Balance..

This is an original reconditioned metal Air Filter LidThis lid has a smaller diameter than the standard Air Filter Lid on the Fiat 500's from 1966 onDiameter: 130mmto fit:Classic Fiat 500 N & D models (from 1957 to 66)If you have any questions please contact us for help..

A very neat kit that is fitted to the bottom of the engine between the crankcase and the sump  and houses the Oil FilterThis Oil Cooler Kit consists of,1x Alloy Engine Mounting Plate1x  Alloy Oil Cooler1x  Spin-on Oil Filter2x  Braided Hoses & Fittings1x  Oil Pump A..

This is a complete Oil Cooler Kit consisting of1x Oil Cooler Radiator1x  Modified Timing Cover2x  Stainless Steel Braided Pipesall x  Aluminium Connections to fit:Classic Fiat 500 D/F/L/R all modelsFiat 126 all air cooled models If you..

Brand NewMade in ItalyThis is made to fit onto a Panda 30 Carburetor WEBER DGF30 with an oval locating holeto fit:Classic Fiat 500 (with Panda 30 Head & Carburettor)Fiat 126  (with Panda 30 Head & Carburettor)If you have any questions please ask for help..

This is a Fully Reconditioned Cylinder Head and is suppied with the following5x Uprated Aluminium Spring Loaded Push Rod Tubes1x Head Gasket Set for Fiat Panda 30This Twin Port Head is used to fit onto Fiat 126 650cc Engine for 25% increased performanceWe also have Manifolds in..