Engine, Gearbox and Related Parts

A fast curing, single part anaerobic thread-lockerKey FeaturesA fast curing, single part anaerobic thread-lockerA very high strength, low viscosity adhesiveSuitable for bonding all threaded metal assembliesThe low viscosity allows the product to penetrate close fitting assemblies..

Hylomar Universal Blue is the world's leading non-setting gasket and jointing compound. The product is used in the automotive, aerospace, defence and general enginerring industries when a non-setting flexible seal is required.It is a polyester urethane based sealant that is non-setting a..

Brand NewMade in ItalyThis is an Inlet Manifold to fit a Fiat Panda 30 Carburettor to a Panda 30 Cylinder Headto fit:Classic Fiat 500 N/D/F/L/R all modelsFiat 126 all air cooled modelsIf you have any questions please contact us for help..

Product InformationIdeal for automotive and machine parts, exhaust systems, plumbing, stripped threads, rust damage and household repairsKey FeaturesIdeal for automotive and machine parts, exhaust systems, plumbing, stripped threads, rust damage and household repairs Strength: 900 P..

Made in ItalyThis is a kit including a Solenoid and flange to modify the starter motor from cable start to key or even push button startto fit:Classic Fiat 500 D/F/L (with 3 bolt starter motor flange on top of the gearbox casing)If you have any questions please contact..

Lightweight Alloy Pulley Kit to replace the basic metal standard onesSupplied with a larger width more modern multi-ribbed Belt which is more efficientand a Tensionerto fit:Classic Fiat 500 all models (exc Giardiniera)Fiat 126 all models (exc BIS)If you have a..

This is an original reconditioned metal Air Filter LidThis lid has a smaller diameter than the standard Air Filter Lid on the Fiat 500's from 1966 onDiameter: 150mmto fit:Classic Fiat 500F/L & R models (from 1965 to 75)If you have any questions please contact us for help..

This is an Adaptor thats retro fitted to the Front Engine Timing Cover for fitting an Oil CoolerFinished in AluminiumSupplied with fittingsto fit:Classic Fiat 500 all modelsFiat 126 All air cooled modelsIf you have any questions please contact us for help..

This is a kit including1x  Oil Pressure Sender Unit1x  Oil Pressure Light Switch2x  Copper WasherThese are used if you have a modified engine and an uprated speedo with an Oil Pressure Gauge and a Warning Lightto fit:Classic Fiat 500 all modelsFiat 126 Air Cool..

This is the thin type Rubber Seal as opposed to the later style Seal which is much wider Supplied as a kit of 10 Seals for all 5 Push Rod Tubes to fit:Classic Fiat 500 N/D/F/L/G (499cc) all models If you have any queries or questions please feel free to ask..

This is the thick type Rubber Seal as opposed to the earlier style Seal which is much narrower Supplied as a kit of 10 Seals for all 5 Push Rod Tubes to fit:Classic Fiat 500 N/D/F/L/R (with 594cc & 652cc) all modelsFiat 126 all models If you have an..

This is a paper gasket to fit on the Rear Main Crank Bearing Housingto fit:Classic Fiat 500 all modelsFiat 126 all modelsIf you have any questions please contact us for help..

This the original type metal fan that fits onto the Dynamo/Alternator Shaft inside the Cowlingwhich has been reinforced and balanced for uprated enginesto fit:classic Fiat 500 D/F/L/RFiat 126 600cc/650cc..

This part fits to the Distributor shaft and once connected to the correct Cable (sold separately) will give an accurate Rev counter readingto fit:Classic Fiat 500 all modelsFiat 600 all modelsIf you have any questions please contact us for help ..

This is a good quality hardened steel CamshaftMade in ItalyPROFILE 35/75to fit:Classic Fiat 500 all models (except Giardiniera)Fiat 126 all air cooled modelsIf you have any questions please contact us for help..

This is a good quality hardened steel Camshaft Made in ItalySupplied with Timing Chain & Sprocketsto fit:Classic Fiat 500 all models (except Giardiniera)Fiat 126 all air cooled modelsIf you have any questions please contact us for help..

This is a good quality hardened steel CamshaftMade in ItalyThis Camshaft is ideal if you are doing a 70mm (540cc) Piston ConversionSize 30/70to fit:Classic Fiat 500 (540c) all models (except Giardiniera)If you have any questions please contact us for help ..

This is a good quality hardened steel CamshaftMade in Italy40/80 with 7.6 lift 110 deg (see diagram)to fit:Classic Fiat 500 all models (except Giardiniera)Fiat 126 all air cooled modelsIf you have any questions please contact us for help..

Brand NewThis is a PAIR (2) of Chrome BZP Domed Nuts and Fibre Washers to attach the top Rocker CoverCan be used for the standard pressed metal or Aluminium type Rocker Coversto fit:Classic Fiat 500 all modelsFiat 126 all modelsIf you have any questions please..

These Washers are fitted to the top Rocker Cover Bolts to stop oil leakingto fit:Classic Fiat 500 all models (up to 1974)Fiat 126 all models (up to 1999)If you have any queries or questions please feel free to ask..